Digital Watchdog Star-Light Plus DWC-VA883WTIR Bedienungsanleitung

Digital Watchdog Überwachungskamera Star-Light Plus DWC-VA883WTIR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Digital Watchdog Star-Light Plus DWC-VA883WTIR (72 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/72

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

User Manual

User ManualUser Manual ver.: /1912

stalling and using the camera, please read this manual carefully

o keep it hand

for future reference.

4K Universal HD over Coax®

vandal ball camera

DWC- 3WTIRVA88

Contents

Safety information

Features

Product and accessories

Part names

Dimensions

Installation

Connecting the camera to monitors

Control board

Adjusting the camera's angle

APPENDIX

Troubleshooting

Specifications

Limits an exclusions d

Warranty

OSD MENU

Menu tree

OSD menu - Exposure

OSD menu - Color

OSD menu - Day and night

OSD menu - Function

OSD menu - Motion

OSD menu - Privacy

OSD menu - Setup

OSD menu - Exit

INSTALLATION

INTRODUCTION

CAUTION

CAUTIONCAUTION

RIS RIK OF CT ELE C

SH KOC . DO T OP NO EN

Th indicates this symbol at dangerous

voltage cons elecisting a risk of of tric shock

i nt in this uns prese with it.

Th exclam bois at oi ymion p nt s l is aleintended to rt

th user ence pere to the pres of important o ating

and mainten erv g sance (s icin ) instruction in the

literat accomp yi e ure an ng th appliance

To prevent damage which may result in ﬁre or electric shock hazard, do not expose this

appliance to rain or moisture.

1. Be sure to use only the standard adapter that is speciﬁed in the speciﬁcation sheet.

Using any other adapter could cause ﬁre, electrical shock, or damage to the product.

2. Incorrectly connecting the power supply or replacing battery may cause explosion, the an

ﬁre, electric shock, or damage to the product.

3. Do not connect multiple cameras to a single adapter.

Exceeding the capacity may cause abnormal heat generation or ﬁre.

4. Securely plug the power cord into the power receptacle. nsecure connection may An i

cause ﬁre.

5. When installing the camera, fasten it securely and ﬁrmly.

A falling camera may cause personal injury.

6. Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or containers

ﬁlled with water on top of the camera. Doing so may cause personal injury due to ﬁre,

electric shock, or falling objects.

CAUTION

CAUTIONCAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

WARNINGWARNING

WARNING

WARNINGWARNING

Safety Information

7. Do not install the unit in humid, dusty, or sooty locations.

Doing so may cause ﬁre or electric shock.

8. If any unusual smells or smoke come from the stop using the product. unit,

In such a case, immediately disconnect the power source and contact the service

center. Continued use in such a condition may cause ﬁre or electric shock.

9. If this product fails to operate normally, contact the nearest service center. Never

disassemble or modify this product in any way.

10.When cleaning, do not spray water directly onto parts of the product.

Doing so may cause ﬁre or electric shock.

Operating

OperatingOperating

Before using, make sure power supply and all other parts are properly connected. the

. While operating, if any abnormal condition or malfunction is observed, stop using the

camera immediately and contact your dealer.

Handling

HandlingHandling

. Do not disassemble or tamper with parts inside the camera.

. Do not drop the camera or subject it to shock or vibration as this can damage the camera.

. Clean the clear ens cover with extra care. Scratches and dust can ruin the quality of the camera image. l

Installation and Storage

Installation and StorageInstallation and Storage

Do not install the camera in areas of extreme temperature, exceeding the allowed range.

Avoid installing in humid or dusty environments.

Avoid installing in places where radiation is present.

Avoid installing in places where there are strong magnetic ﬁelds and electric signals.

Avoid installing in places where the camera would be subject to strong vibrations.

Never expose the camera to rain or water.

PRECAUTION

PRECAUTIONPRECAUTION

Safety Information

1. Read these instructions.

- All these safety and operating instructions should be read before the product is installed or operated.

2. Keep these instructions.

- The safety, operating and use instructions should be retained for future reference.

3. Heed all warnings.

- All warnings on the product and in the operating instructions should be adhered to.

4. Follow all instructions.

- All operating and use instructions should be followed.

5. Do not use this device near water.

- For example: near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming

pool, etc.

6. a Clean only with dry cloth.

- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

- Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product,

and to protect it from over-heating. The openings should never be blocked by placing the product on bed, a

sofa, rug or other similar surface . This product should not be placed in a built-in installation such as a s

bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhere d

to.

8. Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

Important Safety Instructions

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table speciﬁed a by the

manufacturer, or sold with the apparatus.

When apparatus a cart is used, use caution when moving the cart/

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

Important Safety Instructions

1. All electrical and electronic products should be disposed of separately

from the municipal waste stream in accordance laws designated with

by the government or the local authorities.

2. The correct disposal of your old appliance will help prevent potential

negative consequences for the environment and human health.

3. For more detailed information about disposal of your old appliance,

please contact your city , waste disposal service or the shop office

where you purchased the product.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide otection against harmful interference reasonable pr

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interferenece at his own expense.

Disposal of Old Appliances

Universal HD over Coax® technology with HD-Analog, HD-TVI, HD-CVI and all

legacy analog signal support

Star-Light Plus™ color in near-total darkness technology

1/1.8" image sensor

4K at 15fps, 4MP at 30fps, 2.1MP/1080p at 30fps

3.6 ~ 10mm vari-focal motorized zoom p-iris lens with auto-focus

True wide dynamic range (WDR)

OSD control via coaxial (UTC)

Vandal ball housing reduces IR reflection

80' Smart IR™ with intelligent camera sync

Smart DNR™ 3D digital noise reduction

True day/night mechanical IR cut filter

De-Fog™ extreme weather image compensation

Auto sensing 24VAC/12VDC with line lock

Easy icon driven OSD menu with built-in joystick

Programmable privacy zones

Auto gain control (AGC)

Backlight compensation (BLC)

Auto white balance (AWB)

IP67 dust-tight and water-proof to 3 feet

IK 10-rated impact-resistant

5 year warranty

█

Features

█

Product and accessories

Please check if all the camera and accessories are uded in the incl package.

Camera Cables

Quick setup

guide

DC plug

Screws and plastic

anchors - 2pcs

Hex Allen wrench Mounting template

Part names

Power cable

BNC cable

Lens

IR LEDs

Camera

panning screw

Camera

tilt/rotation screw

Dimensions

Unit: inches (mm)

4.92" (125mm)

4.8" (122mm)

3.74" (95mm)

Installation - Disassemble the camera

Before installing your camera, read the following cautions.

Before installing your camera, read the following cautions.Before installing your camera, read the following cautions.

1. The mounting surface must withstand five times the camera weight.

2. Do not let the cables get caught in improper places or the electric line cover can be

damaged. This may cause a short or fire.

3. When installing your camera, do not allow any person to approach the installation

site. If you have any valuable things under the place, move them away

Installation - Instructions

Using the mounting template or your camera,

mark and drill the necessary holes in the

mounting surface.

Pull a necessary wires through and make the ll

proper connections. See pages 14.

Use the mounting screws to install the two (2)

camera on .to the mounting surface See page

1 for tilting and pan adjustment options.5

When the installation is complete, remove the

protective sticker from the camera's lens.

Protective sticker

Mounting template

COAX

Use the diagram below to connect the camera to a Universal HD over Coax

® DVR or CRT

monitor.

Connecting to Monitors

-Power connection - 12V DC/ 24V AC dual-voltage with auto polarity detection

and protection.

NOTE:

NOTE:NOTE: To use your Star-Light Plus™ 4K cameras at a lower resolution, you must

use a VMAX® A1 4K™ DVR to access the camera's menu due to the cameras

being set to 4K as the default. A DVR that does not support 4K resolution may

recognize the camera, but will not deliver a picture.

12V DC/24VAC Universal HD over

Coax® DVR

Adjusting the Camera angle

Rotation 360°

Panning 360°

Tilting 90°

OSD Menu reeT

EXPOSURE

EXPOSUREEXPOSURE DAY & NIGHT (IR OPTION)

DAY & NIGHT (IR OPTION)

DAY & NIGHT (IR OPTION)DAY & NIGHT (IR OPTION)

FUNCTION

FUNCTIONFUNCTION

COLOR

COLORCOLOR

LENS MANUAL / AUTO

2-MOTOR AF MODE / D&N

FILTER /INITIAL

BRIGHTNESS 0 ~ 20

SHUTTER

AUTO / MANUAL / FLICKER

BACKLIGHT OFF / HME / BLC / WDR

STARLIGHT OFF / p16-x2 ~ x32

AGC 0 ~ 10

3D DNR

OFF / LOW / MIDDLE / HIGH

RETURN

MODE AUTO / COLOR / B&W

IR LED ON / OFF

SMART IR 0 ~ 20

D>N THRES 0 ~ 20

N>D THRES 0 ~ 20

DELAY LOW / MIDDLE / HIGH

RETURN

SHARPNESS 0 ~ 10

GAMMA 0.45 ~ 0.75

MIRROR OFF / ON

FLIP OFF / ON

D-ZOOM x1.0 ~ x16.0

DRC OFF / ON

DEFOG OFF / ON

RETURN

WHITE BAL. AUTO / AUTOext /

PRESET / MANUAL

COLOR GAIN 0 ~ 20

RETURN

EXPO

RGB

FUNC

D&N

OSD Menu reeT

MOTION

MOTIONMOTION SETUP

SETUP

SETUPSETUP

EXIT

EXITEXIT

PRIVACY

PRIVACYPRIVACY

DET WINDOWS

SENSITIVITY 0 ~ 10

MOTION OSD OFF / ON

TEXT ALARM OFF / ON

SIGNAL OUT OFF / ON

RETURN

COMM.

CAM ID / BAUDRATE / CONFIRM

OUTPUT

FRAME RATE / FREQ /

ANALOG MODE ONFIRM / C

LANGUAGE

ENG / CHN / CHN(S) / JPN / KOR

CAM TITLE

RIGHT UP / LEFT DOWN

RESET OFF / ON

RETURN

SAVE & EXT

EXIT

RETURN

BOX OFF / ON

POLYGON OFF / ON

RETURN

MOTI

PRIV

SET

EXIT

OSD Menu_Exposure

11 LENS

LENS

LENS LENS

Manual: Manual mode supports the fixed board lens or the manual iris

lens. Auto: AUTO mode sets the camera’s iris automatically.

22 2-MOTOR

2-MOTOR

2-MOTOR 2-MOTOR

Enter the 2-Motor Lens sub-menu.

AF MODE

AF MODEAF MODE

-ONESHOT: Set the camera's focus automatically based on the camera's current field of

view (FoV).

-MANUAL: Adjust the camera's focus and zoom manually.

D&N FILTER

D&N FILTERD&N FILTER

Set the camera's focus to adjust automatically when the camera switches between day

and night model.

INITIAL

INITIALINITIAL

Initiate the two motor lens.

EXPO EXPOSURE

EXPOSURE

EXPOSUREEXPOSURE

2-MOTOR

2-MOTOR2-MOTOR

LENS

LENSLENS

2-MOTOR

2-MOTOR2-MOTOR

BRIGHTNESS

BRIGHTNESSBRIGHTNESS

SHUTTER

SHUTTERSHUTTER

BACKLIGHT

BACKLIGHTBACKLIGHT

STARLIGHT

STARLIGHTSTARLIGHT

AGC

AGCAGC

3D DNR

3D DNR3D DNR

RETURN

RETURNRETURN

AF MODE

AF MODEAF MODE

D&N FILTER

D&N FILTERD&N FILTER

INITIAL

INITIALINITIAL

RETURN

RETURNRETURN

AUTO

AUTOAUTO

1010

AUTO

AUTOAUTO

OFF

OFFOFF

X4X4

1010

HIGH

HIGHHIGH

ONESHOT

ONESHOTONESHOT

SYNC OFF

SYNC OFFSYNC OFF

ONON

OSD Menu_Exposure (cont.)

33 BACKLIGHT

BACKLIGHT

BACKLIGHT BACKLIGHT

Off

OffOff

HME (highlight masking exposure)

HME (highlight masking exposure) HME (highlight masking exposure) HME

allows objects to appear clearly on the screen by

masking extremely bright areas. To setup

HME, set the level and color of the HME mask.

have to be inThe lower the number, the darker the areas

order to be masked. Select from: 0 ~ 20.

Color: Set the color of the HME masks. Select from:

red and blue.black, white, yellow, cyan, green, magenta,

BLC (backlight compensation)

BLC (backlight compensation)BLC (backlight compensation)

If BLC is selected, adjust the size and position of the BLC mask:

- H-POS: Move the mask’s position left or right.

The higher the number, the mask will move to the right.

- V-POS: Move the mask’s position up or down.

The higher the number, the mask will move down.

- H-Size: Adjust the mask’s width. The higher the number, the

right-side panel of the mask will move further to the right.

- V-Size: Adjust the mask’s height. The higher the number, the

down.bottom side panel of the mask will move further

WDR (Wide Dynamic Range)

WDR (Wide Dynamic Range)WDR (Wide Dynamic Range)

If WDR is selected, adjust the WDR level (weight) in the sub-menu.

Select from low, middle, or high (default).

- WDR Mode: Line (sensor WDR), frame (double-scan WDR).

- ROI Mode: Enable WDR only in a set interest area.

- Weight: Available only when normal mode is selected.

ROI (Region of Interest)

ROI (Region of Interest)ROI (Region of Interest)

To have a more efficient scene result, up to four (4)

regions are able to be selected for the WDR effect to

maintain the most suitable color appearances.

EXPO EXPOSURE

EXPOSURE

EXPOSUREEXPOSURE

BACKLIGHT

BACKLIGHTBACKLIGHT

BACKLIGHT

BACKLIGHTBACKLIGHT

BACKLIGHT

BACKLIGHTBACKLIGHT

LENS

LENSLENS

2-MOTOR

2-MOTOR2-MOTOR

BRIGHTNESS

BRIGHTNESSBRIGHTNESS

SHUTTER

SHUTTERSHUTTER

BACKLIGHT

BACKLIGHTBACKLIGHT

STARLIGHT

STARLIGHTSTARLIGHT

AGC

AGCAGC

3D DNR

3D DNR3D DNR

RETURN

RETURNRETURN

LEVEL

LEVELLEVEL

COLOR

COLORCOLOR

RETURN

RETURNRETURN

H-POS

H-POSH-POS

V-POS

V-POSV-POS

H-SIZE

H-SIZEH-SIZE

V-SIZE

V-SIZEV-SIZE

RETURN

RETURNRETURN

WDR MODE

WDR MODEWDR MODE

ROI MODE

ROI MODEROI MODE

WEIGHT

WEIGHTWEIGHT

RETURN

RETURNRETURN

AUTO

AUTOAUTO

1010

AUTO

AUTOAUTO

OFF

OFFOFF

X4X4

1010

HIGH

HIGHHIGH

1010

BLK

BLKBLK

1111

1010

LINE

LINELINE

OFF

OFFOFF

HIGH

HIGHHIGH

OSD Menu_Exposure (cont.)

EXPO EXPOSURE

EXPOSURE

EXPOSUREEXPOSURE

LENS

LENSLENS

2-MOTOR

2-MOTOR2-MOTOR

BRIGHTNESS

BRIGHTNESSBRIGHTNESS

SHUTTER

SHUTTERSHUTTER

BACKLIGHT

BACKLIGHTBACKLIGHT

STARLIGHT

STARLIGHTSTARLIGHT

AGC

AGCAGC

3D DNR

3D DNR3D DNR

RETURN

RETURNRETURN

AUTO

AUTOAUTO

1010

AUTO

AUTOAUTO

OFF

OFFOFF

X4X4

1010

HIGH

HIGHHIGH

Star-Light

Star-LightStar-Light ™

™

™ ™

Plus

Plus Plus (disabled at 4K/15fps)

Off / p20-x2 ~ x32 (default: x4) - Automatically activate the camera’s slow shutter when the image

is too dark. High values are not recommended as they may cause

the image to lag and increase digital noise. The Star-Light ™ Plus

menu cannot be controlled if the shutter settings are above 1/30.

AGC (auto gain control)

AGC (auto gain control)AGC (auto gain control)

0~10 - AGC enhances the picture brightness in low light

conditions. A higher level of AGC will make the image

brighter. This could also increase the amount of digital noise

in the image.

3D DNR (3D digital noise reduction)

3D DNR (3D digital noise reduction)3D DNR (3D digital noise reduction)

Off, low, middle, high - 3D-DNR reduces digital noise on the camera’s view in low light

conditions and allows for clearer images, even at night.

Produktspezifikationen

Marke:	Digital Watchdog
Kategorie:	Überwachungskamera
Modell:	Star-Light Plus DWC-VA883WTIR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digital Watchdog Star-Light Plus DWC-VA883WTIR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Überwachungskamera Digital Watchdog

Digital Watchdog MegaPix DWC-MVT4WiA Bedienungsanleitung

30 August 2024

Digital Watchdog DW-VMAXD1 Bedienungsanleitung

30 August 2024

Digital Watchdog MegaPix IVA+ DWC-MPV85WIATW Bedienungsanleitung

30 August 2024

Digital Watchdog MegaPix CaaS DWC-MF4WI4C2 Bedienungsanleitung

30 August 2024

Digital Watchdog Star-Light Flex DWC-VS753WT Bedienungsanleitung

30 August 2024

Digital Watchdog VMAX AHD CORE DW-VAC42T Bedienungsanleitung

30 August 2024

Digital Watchdog MegaPix CaaS DWC-MF4WI6C6 Bedienungsanleitung

30 August 2024

Digital Watchdog MEGAPIX DWC-MV421TIRB Bedienungsanleitung

30 August 2024

Digital Watchdog MegaPix DWC-MV72I4V Bedienungsanleitung

30 August 2024

Digital Watchdog MegaPix CaaS DWC-MV84WIAC6 Bedienungsanleitung

30 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024