DeWalt DW680K Bedienungsanleitung

DeWalt Hobel DW680K

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für DeWalt DW680K (27 Seiten) in der Kategorie Hobel. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/27

DEWALT Industrial Tool Co., 701 Joppa Road, Baltimore, MD 21286 Printed in Italy (OCT97-1) Form No. 328494

DW678,680/328494-01 1/13/00 11:24 AM Page 2

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

DW677, DW678, DW680

3 1/4” (82mm) Heavy Duty Planers

Raboteuses service intensif 82 mm (3 1/4 po)

Cepillos de 82 mm (3 1/4”) para trabajo pesado

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. LÉASE ESTE INSTRUCTIVOADVERTENCIA:

ANTES DE USAR EL PRODUCTO.

DW678,680/328494-01 1/13/00 11:24 AM Page 3

• Avoid body contact with grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of

electric shock if your body is grounded.

• Don’t expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord to carry the tools or

pull the plug from an outlet. Keep cord away from heat, oil,

sharp edges or moving parts. Replace damaged cords

immediately. Damaged cords increase the risk of electric shock.

• When operating a power tool outside, use an outdoor

extension cord marked “W-A” or “W.” These cords are rated for

outdoor use and reduce the risk of electric shock.

Recommended Minimum Wire Size for Extension Cords

Total Length of Cord

25 ft. 50 ft. 75 ft. 100 ft. 125 ft. 150 ft. 175 ft.

7.6 m 15.2 m 22.9 m 30.5 m 38.1 m 45.7 m 53.3 m

Wire Size

18 AWG 18 AWG 16 AWG 16 AWG 14 AWG 14 AWG 12 AWG

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use tool while tired or

under the influence of drugs, alcohol, or medication. A moment

of inattention while operating power tools may result in serious

personal injury,

• Dress properly. Do not wear loose clothing or jewelry. Contain

long hair. Keep your hair, clothing , and gloves away from

moving parts. Loose clothes, jewelry, or long hair can be caught in

moving parts.

• Avoid accidental starting. Be sure switch is off before plugging

in. Carrying tools with your finger on the switch or plugging in tools

that have the switch on invites accidents.

• Remove adjusting keys or wrenches before turning the tool on.

General Safety Instructions

WARNING! Read and understand all instructions. Failure to

follow all instructions listed below, may result in electric shock, fire

and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

• Keep your work area clean and well lit. Cluttered benches and

dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such

as in the presence of flammable liquids, gases, or dust.

Power tools create sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Grounded tools must be plugged into an outlet properly

installed and grounded in accordance with all codes and

ordinances. Never remove the grounding prong or modify the

plug in any way. Do not use any adaptor plugs. Check with a

qualified electrician if you are in doubt as to whether the

outlet is properly grounded. If the tools should electrically

malfunction or break down, grounding provides a low resistance

path to carry electricity away from the user. Applicable only to

Class I (Grounded ) tools.

• Double insulated tools are equipped with a polarized plug

(one blade is wider than the other.) This plug will fit in a

polarized outlet only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician to install a polarized outlet. Do not

change the plug in any way. Double insulation eliminates the

need for the three wire grounded power cord and grounded power

supply system. Applicable only to Class II (Double Insulated)

tools.

English

DW678,680/328494-01 1/13/00 11:24 AM Page 4

Produktspezifikationen

Marke:	DeWalt
Kategorie:	Hobel
Modell:	DW680K
Breite:	290 mm
Gewicht:	3200 g
Produktfarbe:	Black,Yellow
Eingangsleistung:	600 W
Energiequelle:	AC
Leerlaufdrehzahl:	15000 RPM
Weicher Haltegriff:	Ja
Chip-Dicke (max):	2.5 mm
Planungsweite (max):	82 mm