DeWalt DW226 Bedienungsanleitung

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr DeWalt DW226 (23 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war fĂĽr 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/23
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (JUL02-CD-1) Form No. 385932-02
DW223, DW223G, DW223-220,DW235, DW235G, DW235,DW239,DW249 Copyright © 2002
The following are trademarks for one or more D power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array ofEWALT
pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
385932-02/NStar220 Drills.rev 7/2/02 3:49 PM Page 2
INSTRUCTIVO DE OPERACIĂ“N, CENTROS DE SERVICIO Y PĂ“LIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTESADVERTENCIA:
DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW217/DW221/DW222/DW223/DW223G/DW223-220/DW226/DW231/DW235G
DW235-220/DW236/DW238/DW239/DW245/DW246/DW248/DW249
Drills
Perceuses
Taladros
385932-02/NStar220 Drills.rev 7/2/02 3:49 PM Page 3
Applicable only to Class II (double insulated) tools. The DW217,
DW221, DW222, DW223, DW226, DW231, DW235, DW236,
DW245 and DW246 units have a polarized plug. The DW217,
DW221, DW222, DW223,DW223-220, DW226, DW231, DW235,
DW235-220, DW236, DW238, DW239, DW245, DW246, DW248
and DW249 units are double insulated. The DW223-220, and
DW235-220 units are rated at 230 volts and they are fitted with
the 220 volt style plug which is not polarized..
• Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
• Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W.” These cords are rated
for outdoor use and reduce the risk of electric shock. When using
an extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a
drop in line voltage resulting in loss of power and overheating.
The following table shows the correct size to use depending on
cord length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
Minimum Gage for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
240V 0-50 51-100 101-200 201-300
Ampere Rating
More Not more AWG
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Rules
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify the plug
in any way. Do not use any adaptor plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly
grounded. If the tools should electrically malfunction or break
down, grounding provides a low resistance path to carry electricity
away from the user. The DW223G and the DW235G units are
grounded. Applicable only to Class I (grounded) tools.
• Double insulated tools are equipped with a polarized plug
(one blade is wider than the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician
to install a polarized outlet. Do not change the plug in any way.
Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
385932-02/NStar220 Drills.rev 7/2/02 3:49 PM Page 4

Produktspezifikationen

Marke: DeWalt
Kategorie: Bohrmaschine
Modell: DW226

Brauchst du Hilfe?

Wenn Sie Hilfe mit DeWalt DW226 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bohrmaschine DeWalt

Bedienungsanleitung Bohrmaschine

Neueste Bedienungsanleitung fĂĽr -Kategorien-