Denver WR-40 MK3 Bedienungsanleitung

Denver Radio WR-40 MK3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Denver WR-40 MK3 (1 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

6V DC IN

AUX IN

3 1

6 7

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WR-40

FM RADIO

ENGLISH

AC Adaptor(Included)

230 VOLT AC ADAPTER IS ONLY FOR USE IN-DOOR! NOT FOR USE OUTDOOR!

The AC adaptor(included) for use with the Utility Radio provides 6V DC output at 1 ampere

center pin positive.

Remove the rubber sheet which covers both the DC socket and AUX-in jack, insert the adaptor

plug into the DC socket of the radio. Whenever the adaptor is used, the batteries are automatically

disconnected.

The AC adaptor should be disconnected from the mains supply and the radio when not in use.

Aux-In Function

1. To use it, plug in Aux Cable (3.5mm connector) available at your local dealer and adjust the

volume control to a comfortable listening level.

2. You can start playing audio files from your AUX compatible device. For instructions on how to

play audio files from your AUX compatible device, please refer to its own manual.

CAUTION :

TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG

TO WIDE SLOT, FULLY INSERT.

WARNING :

TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT

EXPOSE THE APPLIANCE TO RAIN

OR MOISTURE.

The Lightning flash with

arrowhead symbol, with an

equilateral triangle is

intended to alert the user of

the presence of uninsulated

dangerous voltage within the

product's enclosure that may

be of sufficient magnitude to

constitute a risk of electric

shock to persons.

CAUTION: TO REDUCE

THE RISK OF ELECTRIC

SHO C K , D O NOT

REMOVE COVER (OR

BACK ). NO USE R

SERVICEABLE PARTS

INS I D E. R EF E R

SE RVI C I N G TO

QUALIFIED SERVICE

PERSONNEL.

The exclamation point within

an equilateral triangle is

intended to alert the user of

the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

1. Power / Volume control Knob

2. FM Antenna

3. Tuning Knob

4. LCD display

5. Speaker

6. Aux in Jack

7. AC adaptor jack

8. Battery Compartment

9. Carrying Handle

Electric and electronic equipment contains materials, components and substances that can be

hazardous to your health and the environment, if the waste material (discarded electric and electronic

equipment) is not handled correctly.

Electric and electronic equipment is marked with the crossed out trash can symbol, seen above.

This symbol signifies that electric and electronic equipment should not be disposed of with other

household waste, but should be disposed of separately.

All cities have established collection points, where electric and electronic equipment can either be

submitted free of charge at recycling stations and other collection sites, or be collected from the

households. Additional information is available at the technical department of your city.

Installing Batteries

1. Unscrew the compartment fixture with a tool, lift up the battery compartment cover located

on the rear of your Utility Radio

2. Insert four “C” size (UM-2) batteries into the compartment. Ensure that battery is inserted in

accordance with the diagram shown.

3. Close the battery cover and screw the compartment fixture.

4. If the radio is not to be used for any extended period of time, it is recommended that the

battery is removed from the radio.

Operating your radio FM

1. Turn on your radio by switching the Power knob to FM position.

2. Rotate the tuning control to select the desired station. One short turn goes 0.1 mhz up/down.

Turn and hold for 1 seconds to make a scan after nearest station.

3. Adjust the Volume Control for comfortable listening.

4. To switch off the radio, turn the Power knob to Standby position.

5. The soft spring antenna is used for FM band reception.

Denver WR-40_Eng (A4)_R3 • 27 Aug 2014 • AT

Importer:

DENVER ELECTRONICS A/S

Stavneagervej 22

DK-8250 Egaa

Denmark

www.facebook.com/denverelectronics

Produktspezifikationen

Marke:	Denver
Kategorie:	Radio
Modell:	WR-40 MK3
Display-Typ:	LCD
Schutzfunktion:	Spritzwassergeschützt
Eingebaute Lautsprecher:	Ja
FM-Radio:	Ja
Breite:	205 mm
Tiefe:	175 mm
Gewicht:	2700 g
Produktfarbe:	Black, Yellow
Höhe:	350 mm
Energiequelle:	Wechselstrom/Batterie
Radiotyp:	Tragbar
Tunertyp:	Analog
Unterstützte Bänder:	FM
RMS-Leistung:	3 W
Eingebautes Display:	Ja
AUX-Eingang:	Ja
Playback MP3:	Nein
Projektion:	Nein
Lautstärkeregler:	Drehregler
Antennentyp:	Extern
Verpackungsbreite:	205 mm
Verpackungstiefe:	240 mm
Verpackungshöhe:	350 mm
Thermometer:	Nein
Griff(e):	Ja
Menge pro ISO Container (20 Fuß):	1620 Stück(e)
Menge pro intermodalem Container (40 Fuß, HC):	3990 Stück(e)
Hintergrundbeleuchtung:	Ja
Farbe der Hintergrundbeleuchtung:	Blau
PLL-Synthesizer:	Ja
Apple-Docking-Kompatibilität:	Nicht unterstützt
Docking-Station enthalten:	Nein