Denver IR-110 Bedienungsanleitung

Denver Radio IR-110

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Denver IR-110 (44 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/44
ENGLISH
GETTING STARTED
Powering ON/OFF
1. When you first connect the unit to the mains socket, the unit will be in STANDBY
mode after showing Welcome to Internet Radio STARTING…. (F.1)(F.2)
2. Press the Standby button on the unit or remote control to switch the unit on.
3. Press the Standby button on the unit or remote control to switch the unit back
to standby on mode.
Selecting Modes
Press the button repeatedly on the unit or remote control to switch between MODE
Music player, DAB radio, FM radio, AUX In and Internet radio modes.
Welcome to
Internet Radio
STARTING
(F.1)
00/00/000
00 : 00
(F.2)
When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
To switch the unit off completely, remove the mains plug from the main socket.
Please turn the unit off completely to save energy when not in use.
Network
1. During mode, press the buttons to select and press the button to System Settings / Network SELECT
confirm.
2. Press the buttons to select from the following settings, and then press the button to confirm. / SELECT
Network wizard SSID – select the desire wireless network.
Rescan – Scan for available networks.
Wired – select wired network.
Manual config – select wired/wireless network with DHCP enable/disable.
PBC Wlan setup Select on the unit and press the button on the modem device that you wish to PBC PBC
connect with. Press the button to continue.SELECT
View settings Display the setting on the unit.
Wlan region Select a country of your choice.
Manual settings Select wired/wireless network with DHCP enable/disable.
NetRemote
PIN Setup
To define a PIN number to be entered before being able to connect to the unit
remotely over a network
Network profile View the connected network.
Clear network
settings
To delete the connected network memory in Network profile.
Keep network
connected
To define whether remains connected to its network in Standby mode and when not in
Network radio mode. This is necessary for remote operation and audio streaming in Music
Player mode.
3. Press the button on the unit or on the remote control to cancel the setting and return back to the BACK
previous menu.
ENGLISH
After the system reset, all the tuned stations, DAB & FM preset stations will be erased.
Setting the Alarm
1. Press the button on the remote control, the display shows Alarm (1 or 2): Off [hh:mm]”.ALARM
2. Press the buttons to select the Alarm number (1 or 2) and then press the button to start the / SELECT
setting of the following parameters.
For the following setting, press the buttons to select then press the button to confirm. / SELECT
Enable Off/ Daily/ Once/ Weekends/ Weekdays
Time (Alarm On time)
Mode Buzzer/ Internet radio/ DAB/ FM
Preset Last Listened/ (Preset station)
Volume Muted, 1-31
Save Save and confirm the alarm setting
Finally, select “Save” and press the button to save the alarm setting. When the alarm is set, the alarm icon SELECT
will appear on the display during standby mode.
To turn off the alarm when it sounds, press the STANDBY or button.ALARM
During Standby mode, press the button repeatedly to turn the saved Alarm on/off.ALARM
Factory Reset
There may be times when you need to reset your unit back to the factory settings especially when you have moved
house. If you experience reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national DAB+ stations in that area, your
previously tuned channels may no longer be available.
1. During System settings mode, press the buttons to select / Factory reset, and press the button to SELECT
confirm.
2. Press the buttons to select , and press the button to confirm or select to cancel. / Yes SELECT No


Produktspezifikationen

Marke: Denver
Kategorie: Radio
Modell: IR-110

Brauchst du Hilfe?

Wenn Sie Hilfe mit Denver IR-110 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio Denver

Bedienungsanleitung Radio

Neueste Bedienungsanleitung für -Kategorien-