DeLonghi Bend Line HFX60C20 Bedienungsanleitung

DeLonghi Heizung Bend Line HFX60C20

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für DeLonghi Bend Line HFX60C20 (4 Seiten) in der Kategorie Heizung. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

IMPORTANT SAFEGUARDS

Danger!

Failure to observe the warning may result in life threatening

injury by electric shock.

- The appliance must not be placed im-

mediately under a xed power socket.

- Do not use the appliance near show-

ers, bathtubs, sinks, swimming pools,

etc.

- If the power cable is damaged, it must

be replaced by the manufacturer, an

authorised service centre or a qualied

electrician in order to eliminate all risk.

Important!

Failure to observe the warning could result in injury or

damage to the appliance.

- This appliance can be used by children

aged from 8 years and above and per-

sons with reduced physical, sensory or

mental capabilities or lack of experien-

ce and knowledge if they have been

given supervision or instruction con-

cerning use of the appliance in a safe

way and understand the hazards in-

volved. Children shall not play with the

appliance. Cleaning and user mainte-

nance shall not be made by children

without supervision.

- Children of less than 3 years should be

kept away unless continuously super-

vised.

- Children aged from 3 years and less

than 8 years shall only switch on/o

the appliance provided that it has been

placed or installed in its intended nor-

mal operating position and they have

been given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved. Children aged from 3 years

and less than 8 years shall not plug

in, regulate and clean the appliance or

perform user maintenance.

CAUTION — Some parts of this

product can become very hot and

cause burns. Particular attention

has to be given where children

and vulnerable people are pre-

sent.

- ATTENTION: To avoid the safety sy-

stem resetting accidentally, this ap-

pliance must not be powered through

an external on/o device such as a

timer, or connected to a circuit which

is turned o and on regularly by the

energy supplier.

- Do not use the appliance in small

rooms when they are occupied by

persons that are not capable of leaving

the room, unless constant supervision

is provided.

Extra Europe market only:

- This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience

and knowledge, unless they have

been given supervision or instruction

concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to

ensure that they do not play with the

appliance.

Danger of burns!!

Failure to observe the warning could result in burns or scalds.

- WARNING: To avoid overhe-

ating, never under any cir-

cumstances cover the appliance

during operation as this would lead to

a dangerous rise in temperature.

Please note:

This symbol indicates recommendations and important

information for the user.

- Always use the appliance in an upright position.

- The use of extension leads is not recommended.

However if they cannot be avoided, follow the instruc-

tions accompanying the extension lead and never

exceed the power limit marked on the extension.

- The heater must be positioned at least 50 cm from furni-

ture or other objects.

- Do not use the appliance in rooms with a oor area of

less than 4m2.

- Before putting the appliance away, make sure it is com-

pletely o and unplugged from the mains socket. Wrap

the cable around the base.

Do not store in dusty atmospheres.

- Do not rest anything on the appliance.

- Do not use the appliance to dry laundry. Do not obstruct

the air intake and outlet grilles (danger of overheating).

- Do not use the appliance near walls, furniture, curtains,

etc.

Safety functions

- Safety device: the appliance is tted with a safety

device which switches it o in the event of accidental

overheating (e.g. obstruction of air intake and outlet

grilles, motor turning slowly or not at all).

To reset, unplug the appliance from the mains socket for

a few minutes, remove the cause of overheating then

plug in again.

If the appliance doesn't work please contact the

De'Longhi Customer Service.

- Tip over safety device: a tip over safety device turns

the appliance o if it falls over or is positioned inappro-

priately in such a way as to jeopardise safety.

The appliance emits a beep and a dot ashes on the di-

splay. The appliance resumes operation a few seconds

after being placed in an upright position again.

Disposing of the appliance

The appliance must not be disposed of with hou-

sehold waste, but taken to an authorised waste se-

paration and recycling centre.

INTRODUCTION

Thank you for choosing a De’Longhi product.

Please take a few minutes to read these instructions.

This will avoid all risks and damage to the appliance.

DESCRIPTION

A ON/STAND-BY button

B +/- Adjustment buttons

C Oscillation button

D “ECO PLUS” function button

E Timer button

F MODE button (for selecting the operating mode)

G Power indicator light

H Back cover with lter

I Receiver for remote control (certain models only)

USE

Installation

The appliance can be used on any horizontal surface.

Do not overload the electrical circuit. Avoid using the same

socket for other appliances.

Electrical connection

- Before plugging the appliance into the mains socket,

check that the mains power supply corresponds to the

value indicated on the rating plate and that the mains

power supply is adequate for the load.

- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/

EEC ON RADIO INTERFERENCE SUPPRESSION.

Operation and use

- Connect the appliance to the power outlet.

- The appliance emits a beep and the power indicator

light (G) also comes on and remains lit while power to

the appliance is on. The appliance goes into STAND-BY.

- Press the ON/STAND-BY button (A) to turn on the

appliance. It will begin to heat with the predened

settings.

- Press the MODE button (F) to select one of the following

functions available:

Ventilation

In this operating mode only the fan operates, so the

appliance does not heat the room.

Anti-freeze

In this operating mode the appliance keeps the room at

a temperature of 7°C to prevent freezing temperatures.

Heating 1 and Heating 2

In this operating mode you can set the desired

temperature by pressing the + and - adjustment

buttons (B).

- Heating 1 (minimum power level):

The appliance operates at the minimum power, reducing

noise and energy consumption to the minimum.

- Heating 2 (maximum power level):

The appliance operates at the maximum power for rapid

heating of the room.

- To turn o the appliance press button ON/STAND-BY

(A). The display could show the count down for about

6 seconds. To completely turn o the appliance, remove

the plug from the socket.

Please note: The display can show the temperature in

both °C and °F. To change the temperature scale, press and

hold the + key for few seconds, then release.

ECO PLUS function

In this operating mode the appliance will automatically set

the power level to guarantee the best comfort reducing the

energy consumption.

The maximum temperature setting is 26 °C. To activate this

function, press the ECO PLUS button (D).

Oscillation button

If you want the appliance to distribute the airow over a

larger area, press the oscillation button (C) . The appliance

will then oscillate right and left. To stop the oscillation in the

desired position, just press oscillation button (C) again.

24HOUR DIGITAL TIMER

This function can be activated from any operating mode.

Delayed switch-on: with the appliance in the STAND-BY

position, press the timer button (E) .

The display shows the symbol and the time remaining

before switch-on. To set the timer, use the + and - adjustment

buttons (B), then wait a few seconds for the programming to

be set. The display returns to show for stand-by and the

symbol to indicate you have set the timer.

When the programmed time has been reached, the appliance

turns on with the same settings it had during the previous

operation.

Delayed shut-o: With the appliance on, press the timer

button (E) .

The display shows the symbol and the time remaining

before shut-o. To set the timer, use the + and – adjustment

buttons (B), then wait a few seconds for the programming to

be set. The display returns to show the current settings and

the symbol to indicate you have set the timer.

When the programmed time as been reached the appliance

shuts o automatically. If you want to go back to operation

without the timer, press the timer button (E) twice.

The timer symbol disappears from the display.

Using the remote control (certain models only)

The remote control functions correspond to those on the

control panel. See the section “Operation and Use" on the

previous page for a description of the functions.

Inserting or replacing the batteries

- The remote control is

provided with a lithium

battery CR2032. To let

the appliance function,

remove the battery

cover strip, by pulling it.

- To replace the batteries,

remove the battery

cover by rotating it.

Replace the battery

paying attention to respect the right polarity as shown

in gure 1.

- Replace the cover rotating it towards the position .

- Old batteries must be removed and disposed o in

accordance with current legislation as they are harmful

to the environment.

Extra Europe market only:

Important!

- WARNING - KEEP BATTERIES OUT OF REACH OF CHIL-

DREN.

- Swallowing may lead to serious injury in as little as 2

hours or death, due to chemical burns and potential

perforation of the oesophagus.

- Examine devices and make sure the battery compart-

ment is correctly secured. Do not use if compartment is

not secure.

- Dispose of used button batteries immediately and safe-

ly. Flat batteries can still be dangerous.

MAINTENANCE

- Before carrying out any maintenance, always unplug

from the mains socket.

- During the season when the appliance is in use, clean

the air intake and outlet grilles regularly using a vacuum

cleaner.

- Never use abrasive powders or solvents to clean the

appliance.

- The dust lter which retains impurities in the air, It is

integrated in the removable back cover. To clean the

lter, remove the grille by pulling outward. Blow it

lightly, then replace it into the appliance.

Fig. 1

Produktspezifikationen

Marke:	DeLonghi
Kategorie:	Heizung
Modell:	Bend Line HFX60C20
Timer:	Ja
Breite:	229 mm
Tiefe:	168 mm
Produktfarbe:	Black, White
Steuerung:	Drehregler
Höhe:	333 mm
AC Eingangsspannung:	220 - 240 V
AC Eingangsfrequenz:	50 Hz
Typ:	Elektrischer Raumheizlüfter
Leistung:	2000 W
Anzahl der Leistungsstufen:	2
LED-Anzeigen:	Leistung
Ein-/Ausschalter:	Ja
Anzeigelicht:	Ja
Fernbedienung:	Ja
Regelbare Temperatur:	Ja
Heizleistung:	2000 W
Geeignet für:	Indoor
Heizelement Typ:	Keramik
Auto -Oszillation:	Ja
Sommerlüftung:	Ja
Platzierungsoptionen:	Desk, Table, Wall
Maximale Timer-Zeit:	24 h
Hitzeleistung (min):	1100 W
Geeignet bis zu Zimmergrößen von:	60 m³
Frostschutz:	Ja
Tragbar:	Ja
Power-LED:	Ja
Schwenkbar:	Ja
Anti-Staubfilter:	Ja