Definitive Technology ProCinema 6D Bedienungsanleitung

Definitive Technology Lautsprecher ProCinema 6D

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Definitive Technology ProCinema 6D (7 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

O W N E R ’ S M A N U A L

THANK YOU

for purchasing the Deﬁnitive Technology ProCinema 6D System. This high-performance six-speaker

system is designed to deliver equally superb sound for home theater and music. Please read the

instructions carefully to familiarize yourself with the speaker system.

PLEASE INSPECT FOR SHIPPING DAMAGE

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage

most likely occurred in handling after it left our plant and should be reported at once to

your Deﬁnitive dealer or the shipping company which delivered your loudspeaker.

deﬁnitivetechnology.com/register

PROCINEMA 6D SYSTEM Overall Frequency Response: 22 Hz – 30 kHz Recommended Ampliﬁcation: 10 – 175 watts/channel

PROCENTER 6D CENTER CHANNEL

Dimensions: 10.5” W x 4.25” D x 4” H

Frequency Response: 55 Hz – 30 kHz

Efﬁciency: 89 dB

Nominal Impedance: Compatible with 4 – 8 ohm outputs

Driver Complement: Two 3.25” BDSS bass/midrange drivers

coupled to two 3.25” pressure-driven

planar low-frequency radiators, 1”

Pure Aluminum Dome Tweeter

Recommended

Ampliﬁcation: 10 – 175 watts

PROSUB 6D SUBWOOFER

Dimensions: 10.38” W x 13” D x 13” H

Frequency Response: 22 Hz – 150 Hz

Driver Complement: One 8” woofer with polymer cone,

one 8” infrasonic radiator

Built-in Ampliﬁer: 250 watts RMS

High Pass Filter: 6dB/octave speaker level at 100 Hz

Low Pass Filer: 24dB/octave continuously variable

(40 Hz – 150 Hz)

Power Consumption: 60Hz 100-120V, 2.1A

PROMONITOR 6D SATELLITE SPEAKERS

Dimensions: 4” W x 4.25” D x 7” H

Frequency Response: 65 Hz – 30 kHz

Efﬁciency: 88 dB

Nominal Impedance: Compatible with 4 – 8 ohm outputs

Driver Complement: One 3.25” BDSS bass/midrange driver

coupled to one 3.25” pressure-driven

planar low frequency radiator, 1” Pure

Aluminum Dome Tweeter

Recommended

Ampliﬁcation: 10 – 150 watts

PROCINEMA 6D SYSTEM OWN

PROCINEMA 6D SYSTEM OWNER’S MANUAL

channel +(red) speaker wire (high-level) out on the back of

the ProSub 6D.

5. Wire the – (black) terminal of the left ProMonitor 6D to the left

channel – (black) speaker wire (high-level) out on the back of

the ProSub 6D.

6. Repeat steps 4 and 5 for the right ProMonitor 6D.

7. Set the low frequency ﬁlter control on the back of the

subwoofer to approximately 10 – 12 o’clock. Please note that

the exact frequency will depend on many factors including

speciﬁc positions of the speakers in the room, so you might

experiment with a slightly higher or lower setting to achieve

ideal blending between the sub and the satellites for your

particular setup. Listen to a wide variety of music to determine

the correct setting for this in your system.

8. Set the subwoofer level control to approximately 12 o’clock.

Please note that the exact level depends on many factors

including your room size, positions of the speakers, etc. as well

as your personal listening taste, so you might experiment with

the subwoofer level while listening to a wide variety of music

until you achieve the ideal setting for your system.

9. Wire your center channel to the center channel out on your

receiver (or center channel ampliﬁer) and your left and right rear

surround speakers to the rear channel outputs on your receiver

or rear channel ampliﬁer (taking care that all speakers are in

phase, i.e. + (red) to + (red) and – (black) to – (black)).

10. Set the bass management system of your receiver or decoder

for “Large Left and Right Main Speakers,” “Small Center,”

and “Small Rear Surround Speakers” and “No Subwoofer.”

All the bass information including the .1 channel LFE signal

will be directed to the main left and right channels and into

the subwoofer giving you all the beneﬁts of Dolby Digital.

OPTION FOR METHOD 1 HOOK-UP

In addition to the hook-up as described above, you may use an

RCA-to-RCA low level cable to connect the LFE/sub-out on your

receiver to the low-level LFE/sub-in on a ProSub 6D. Set your

Speaker Setup to “Large Left and Right Main Speakers” and a

“Subwoofer” and “Small Center” and “Small Surrounds.”

METHOD 2

1. Wire the left front ProMonitor 6D directly to the left front

channel of your ampliﬁer or receiver and the right front

ProMonitor 6D directly to the right channel of your ampliﬁer or

receiver taking care that the speakers are in phase, i.e. + (red)

to + (red) and – (black) to – (black).

2. Use an RCA-to-RCA low-level cable to connect the LFE

subwoofer out on your receiver to the LFE input on your subwoofer.

3. Wire your center channel to the center channel out on your

receiver (or center channel ampliﬁer) and your left and right rear

surround speakers to the rear channel outputs on your receiver

or rear channel ampliﬁer (taking care that all speakers are in

phase, i.e. + (red) to + (red) and – (black) to – (black)).

4. Set the Speaker Setup of your receiver or decoder for “Small

Left and Right Main Speakers,” “Small Center” and “Small

Rear Surround Speakers” and “Yes Subwoofer.”

5. Set the variable low-pass crossover to 150 and set the

subwoofer level control to 12 o’clock. Please note that you

can set the subwoofer level either by turning the subwoofer

level control on the back of the subwoofer or with LFE level

adjustment in your receiver. We suggest setting the subwoofer

to 12 o’clock and then making ﬁne adjustments to the

subwoofer level using the LFE level control on your receiver.

METHOD 1

1. First, wire the + (red) terminal of the left channel speaker wire

output of your receiver or ampliﬁer to the + (red) terminal of the

left channel speaker wire (high-level) input of your ProSub 6D.

2. Next, wire the – (black) terminal of the left channel speaker wire

output of your receiver or ampliﬁer to the – (black) terminal of

the left channel speaker wire (high-level) input of the ProSub 6D.

3. Repeat Steps 1 and 2 for the right channel.

4. Wire the + (red) terminal of the left ProMonitor 6D to the left

PROCINEMA 6D SIX-PIECE

SURROUND SOUND SYSTEM

This system is designed to be used as a 5.1 Dolby/DTS surround

sound home theater.

WHEN MOUNTING

THE SPEAKERS ON A WALL

• The speakers can be mounted on a wall using the

keyhole hook on its rear panel.

• When you mount the speakers, be sure to install

them properly and securely.

1. Screw in one self-tapping screw (commercially available

5/32 inch / 4mm to 3/16 inch / 5mm diameter) into a

wall that has sufﬁcient strength to support the weight

of the speaker,or into reinforcing material on the wall.

2. Hook the keyhole hook on the back of the speaker

onto the head of the self-tapping screw.

• Check that the head of the self-tapping screw hooks securely

into the keyhole hook hole.

• Do not attempt to install this product onto a wall made of material

that may crumble easily, such as mortar or decorative plywood.

Doing so may result in the screw pulling out and speaker falling,

causing damage to the speaker or injury.

• Do not install the speaker using other methods such as nails or

double-sided tape. The nails may become loose due to vibration or

the double-sided tape may peel off due to prolonged use, causing

the speaker to fall.

• Be sure to ﬁx the cables in place so that they cannot be pulled or

tripped over by accident.

• Be sure to check that the product is safe after installation. Please

note that we cannot accept any liability for accidents, etc. that occur

as a result of where or how this product is installed. If you are

unsure of how to install this product safely, request a professional

contractor do the installation work.

CONNECTING YOUR LOUDSPEAKERS

FIGURE 3 – WIRING AND POLARITY

Strip 0.25” (6mm) wire.

1. Unscrew binding post and insert wire.

2. Tighten until wire is secure.

Identify markings on wire and assign +/-.

Ensure that the speaker is always connected

to the receiver or ampliﬁer+ to + and – to –.

Receiver/Ampliﬁer

Satellite Speakers

Produktspezifikationen

Marke:	Definitive Technology
Kategorie:	Lautsprecher
Modell:	ProCinema 6D

Brauchst du Hilfe?

Wenn Sie Hilfe mit Definitive Technology ProCinema 6D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Lautsprecher Definitive Technology

Definitive Technology Dymension DW-45 MAX Bedienungsanleitung

6 September 2024

Definitive Technology Dymension DW-65 MAX Bedienungsanleitung

6 September 2024

Definitive Technology Dymension DW-65 PRO Bedienungsanleitung

6 September 2024

Definitive Technology Dymension DC-80 MAX SUR Bedienungsanleitung

6 September 2024

Definitive Technology Mythos LCR-75 Bedienungsanleitung

5 September 2024

Definitive Technology Mythos LCR-85 Bedienungsanleitung

5 September 2024

Definitive Technology Mythos LCR-65 Bedienungsanleitung

3 September 2024

Definitive Technology BPVX Bedienungsanleitung

20 August 2024

Definitive Technology DT6.5R Bedienungsanleitung

19 August 2024

Definitive Technology Demand D17 Bedienungsanleitung

18 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024

Marshall Tufton Bedienungsanleitung

15 Oktober 2024

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024