Definitive Technology ProCinema 1200 Bedienungsanleitung

Definitive Technology Lautsprecher ProCinema 1200

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Definitive Technology ProCinema 1200 (14 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĆ¼r 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/14
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be
reported at once to your Deļ¬nitive dealer or the shipping company which deliv-
ered your loudspeaker.
Congratulations
Congratulations on your purchase of the Deļ¬nitive
Technology ProMonitor Loudspeaker System.
This revolutionary loudspeaker utilizes state-of-the-art
components (cast basket homopolymer-coned
bass-midrange drivers, moving coil ferroļ¬‚uid-cooled
pure aluminum dome high frequency radiators, uniphase
crossover networks, etc.), a non-resonant PolyStone
ā„¢
cabinet and low diffraction construction in order to
achieve the most lifelike sound possible in your listening
room for many years to come.
Your ProMonitor is a unique speaker which may be
used by itself as a full-range system or as a satellite
with a Deļ¬nitive ProSub to create a three-piece system.
This three-piece system can then be combined with
the ProCenter as a four-piece home theater system
and then with two additional ProMonitors to create
a complete Dolby Digital AC-3-ready ProCinemaĀ®
home theater system.
ProMonitorā„¢800
ProMonitorā„¢1000
Loudspeaker System
Ownerā€™s Manual
It is critical for proper performance that both speakers (left and right) be connect-
ed in proper phase. Note that one terminal on each speaker (the +) is colored red and
the other (the -) is colored black. Please make certain that you connect the red (+)
terminal on each speaker to the red (+) terminal of its channel on your ampliļ¬er or
receiver and the black (-) terminal to the black (-) terminal. It is essential that both
speakers be connected in the same way to the ampliļ¬er (in phase). If you experience
a great lack of bass, it is likely that one speaker is out of phase with the other.
Connecting Your Loudspeakers
Usually if distortion is heard when the speakers are being driven at
loud levels, it is caused by driving (turning up) the ampliļ¬er too loud and
not driving the speakers with more power than they can handle. Remember,
most ampliļ¬ers put out their full rated power well before the volume control
is turned all the way up! (Often, turning the dial half way up is actually full
power.) If your speakers distort when you play them loud, turn down the
ampliļ¬er or get a bigger one.
Using the ProMonitor
in Conjunction with a ProSub
When a pair of ProMonitors is used in conjunction with a ProSub, they may be
connected either directly to the left and right channels of your ampliļ¬er or
receiver, or to the left and right speaker level outputs on a ProSub (when the
ProSub is connected via the high-level speaker wire inputs to the left and right
channel speaker outputs on your receiver). Connecting the ProMonitor to a ProSub
(which includes a built-in high-pass crossover for the ProMonitors) will result in
greater dynamic range (the system can be played louder without over driving the
satellites) and is recommended for most installations especially when the system is
being used for home theater. Because this is the most common set-up, the following
instructions relate to wiring the ProMonitors to a ProSub.
Wiring 2 ProMonitors and 1 ProSub
for Stereo (2-Channel) Use
1. First, wire the red (+) terminal of the left channel speaker wire output of your
receiver or ampliļ¬er to the red (+) terminal of the left channel speaker wire (high
level) input of your ProSub.
2. Next, wire the black (-) terminal of the left channel speaker wire output of your
receiver or ampliļ¬er to the black (-) terminal of the left channel speaker wire
(high level) input of the ProSub.
3. Repeat Steps 1 and 2 for the right channel.
4. Wire the red (+) terminal of the left ProMonitor to the left channel red (+)
speaker wire (high level) out on the back of the ProSub.
5. Wire the black (-) terminal of the left ProMonitor to the left channel black (-)
speaker wire (high level) out on the back of the ProSub.
2
6. Repeat steps 4 & 5 for the right ProMonitor.
7. Set the low frequency ļ¬lter control on the back of the ProSub to the setting described
in a ProSub Ownerā€™s Manual. Please note that the exact frequency will depend on
many factors including speciļ¬c positions of the speakers in the room, so you might
experiment with a slightly higher or lower setting to achieve ideal blending between
the sub and the satellites for your particular set-up. Listen to a wide variety of music
to determine the correct setting for this in your system.
8. Set the subwoofer level control to the setting described in a ProSub Ownerā€™s Manual.
Please note that the exact level depends on many factors including your room size,
position of the speakers, etc. as well as your personal listening taste, so you might
experiment with the subwoofer level while listening to a wide variety of music until
you achieve the ideal setting for your system.
9. If your receiver allows you to choose whether or not the main speakers are to receive
a full-range signal, choose full range (or ā€œLargeā€ Left and Right Main Speakers).
There are many different variations of the basic Dolby ProLogic and Dolby
Digital AC-3 formats and features, as well as a multiplicity of ways in which the
speakers can be hooked up to these systems. We will discuss the simplest and most
effective hookups and adjustments. If you have a particular question regarding your
set-up, please call us.
For Dolby ProLogic Systems
Follow Steps 1-9 provided earlier. The subwoofer will receive its low frequency
signal through the full-range speaker level outputs. If, however, your system has
a separate subwoofer RCA low level output which has a remote control level
adjustment, you might also want to hook this up using an RCA-to-RCA low level
cable to the LFE/subwoofer-in low level input (the lower RCA input) on a ProSub.
Then use your remote control sub level adjustment to ļ¬ne-tune the low frequency
level for different types of program material. (You might ļ¬nd you want a higher
level for some music or for movies).
For Dolby Digital AC-3 5.1 Systems
Please note that Dolby Digital decoders have bass management systems (systems
which direct the bass to the various channels) which vary from unit to unit.
Simplest Hook-Up
The simplest way to hook up and use your ProCinema System with Dolby Digital
5.1 Systems is to hook a ProMonitor to each of the front (main) left, front (main) right,
rear (surround) left and rear (surround) right channels and a ProCenter to the front
center channel outputs of your receiver or power ampliļ¬er making sure that the red (+)
terminal of each speaker is hooked up to the red (+) terminal of its proper channel out-
put and the black (-) terminal is connected to the black (-) terminal of its proper chan-
nel output. Then connect the LFE RCA output on your receiver or decoder to the LFE
input on your Deļ¬nitive ProSub subwoofer.
Using ProMonitors with a ProSub
in Home Theater
3

Produktspezifikationen

Marke: Definitive Technology
Kategorie: Lautsprecher
Modell: ProCinema 1200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Definitive Technology ProCinema 1200 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Definitive Technology

Definitive Technology

Definitive Technology Dymension DW-45 MAX Bedienungsanleitung

6 September 2024
Definitive Technology

Definitive Technology Dymension DW-65 MAX Bedienungsanleitung

6 September 2024
Definitive Technology

Definitive Technology Dymension DW-65 PRO Bedienungsanleitung

6 September 2024
Definitive Technology

Definitive Technology Dymension DC-80 MAX SUR Bedienungsanleitung

6 September 2024
Definitive Technology

Definitive Technology Mythos LCR-75 Bedienungsanleitung

5 September 2024
Definitive Technology

Definitive Technology Mythos LCR-85 Bedienungsanleitung

5 September 2024
Definitive Technology

Definitive Technology Mythos LCR-65 Bedienungsanleitung

3 September 2024
Definitive Technology

Definitive Technology BPVX Bedienungsanleitung

20 August 2024
Definitive Technology

Definitive Technology DT6.5R Bedienungsanleitung

19 August 2024
Definitive Technology

Definitive Technology Demand D17 Bedienungsanleitung

18 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĆ¼r -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024