Dali Helicon IW 200 Phantom Bedienungsanleitung

Dali Lautsprecher Helicon IW 200 Phantom

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dali Helicon IW 200 Phantom (7 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
3
Thank you for choosing DALI In-Wall loudspeakers!
DALI is acclaimed around the world for unique loudspeakers designed and
built to our uncompromising standards for design and performance.
DALI’s main area of expertise is the development and refinement of known
and new techniques in the fields of audio and acoustics.
The goal for every single DALI loudspeaker is to create a listening experience
in your home that will make you forget time and place.
It is essential that your DALI In-Wall loudspeakers are correctly installed and
connected. This owner’s manual contains our guidelines for installation, con-
nection and maintenance.
NOTE: The sections on installing and painting the loudspeaker is for the use
of professional installers. If you have any questions, please feel free to con-
tact your authorised DALI dealer.
Enjoy!
54
Safety Guidelines
Always follow all safety guidelines
DALI Helicon IW 200 Phantom is intended for home use only. It is not
intended for use in professional environments such as alarmsystems,
public address, etc.
The speaker must only be used indoors and never in wet areas or at
extreme hot or cold temperatures
DALI Helicon IW 200 Phantom must not be exposed to direct sunlight
DALI Helicon IW 200 Phantom must be installed with a secure drop wire
support line
Power off the amplifier when connecting the speaker cables
Parts List
The following parts are enclosed:
1 Helicon IW 200 Phantom
1 3 mm Allen wrench
1 mounting template
1 protective template for painting
1 owner’s manual
1 white logo badge
About In-Wall Loudspeakers
DALI Helicon IW 200 Phantom provides the
unique, acclaimed sound of a true DALI Heli-
con loudspeaker for easy and discreet integra-
tion into your home.
DALI Helicon IW 200 Phantom is equally
suited for stereo and surround systems where
sublime sound quality is a high priority.
DALI recommends the use of a subwoofer such
as DALI Helicon S600 in conjunction with Heli-
con IW 200 Phantom. This will permit the repro-
duction of the lowest frequencies for an overall
enhancement of your sound system.
Your choice of cables is a crucial element in
your installation. Be aware that replacing
cables after installation is a difficult task. There-
fore, select quality cables such as DALI Silver
Wave Two.
76
Mounting Template
The enclosed template can be used to initially visualise how your speakers should
be mounted. Then, tape the template perfectly level at the selected mounting
position, so that you can mark the necessary opening.
Helicon IW 200 Phantom
DALI Helicon IW 200 Phantom incorporates dog-
leg brackets for wall or ceiling mounting. The
brackets attach the loudspeaker firmly to the
rear of the surface on which it is mounted. They
extend out at a 90 degree angle when the screws
are tightened. The screws should be tightened
so that the loudspeaker sits securely in place
- but be careful not to tighten them too much.
If you need to remove the loudspeaker, loosen
the screws approximately 5 to 10 turns counter-
clockwise and the brackets will loosen their grip.
Do not unscrew more than 5 to 10 turns or the
bracket may fall off the screws.
DALI Helicon IW 200 Phantom must be fitted
with a drop wire to prevent the speaker from fall-
ing in the event of re, earthquake, etc. To pre-
vent injury or damage from a fall, t a steel wire
or other non-flammable connection between a
solid support in the house (ceiling beam, wall
stud, etc.) and the eyehook on the Helicon IW
200 Phantom as shown.
Connect cables so that the loudspeaker is in cor-
rect phase. The red (+) loudspeaker terminal must
be connected to the red (+) amplifier terminal. The
black (-) loudspeaker terminal must be connected
to the black (-) amplifier terminal.
Remove insulation so that approx. ½ of bare
wire is exposed. Press the top of the terminal
down and insert the bare wire into the open-
ing. When the wire is fully in place with no loose
strands exposed, release the terminal. The cable
is now connected.
-!8#-v$2/0
34%%,7)2%
#%,,).'7!,,
Skabelonen skal være 100% vandret før skæring
NORMAL
LOW FREQ LEVEL
ENHANCED


Produktspezifikationen

Marke: Dali
Kategorie: Lautsprecher
Modell: Helicon IW 200 Phantom

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dali Helicon IW 200 Phantom benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Dali

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-