Dahua Technology HAC-HFW1809T-A-LED Bedienungsanleitung

Dahua Technology Überwachungskamera HAC-HFW1809T-A-LED

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dahua Technology HAC-HFW1809T-A-LED (39 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/39
HDCVI Camera
User’s Manual
V1.0.
2
I
Foreword
General
This manual introduces the functions and operations of the HDCVI camera (hereinafter referred to as
"the device"). Read carefully before using the device, and keep the manual safe for future reference.
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable results.
TIPS Provides methods to help you solve a problem or save time.
NOTE Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Time
V1.0.2
Added "5 Smart Dual Illuminators Cameras
Configuration".
Added "7 .4 Configuring Smart Dual
Illuminators Active Deterrence Camera".
August 2022
V1.0.1 Adjusted the format of tables.
Added Cybersecurity Recommendations.
August 2021
V1.0.0 rFirst elease. June 2020
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
II
About the Manual
The manual is for reference only. Slight differences might be found between the manual and the
product.
We are not liable for losses incurred due to operating the product in ways that are not in
compliance with the manual.
The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or
visit our official website. The manual is for reference only. Slight differences might be found
between the electronic version and the paper version.
All designs and software are subject to change without prior written notice. Product updates
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
There might be errors in the print or deviations in the description of the functions, operations
and technical data. If there is any doubt or dispute, we reserve the right of final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and company names in the manual are properties of their
respective owners.
Please visit our website, contact the supplier or customer service if any problems occur while
using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.
III
Important Safeguards and Warnings
Electrical Safety
All installation and operation should conform to your local electrical safety codes.
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Note that the power supply requirements are subject to the device label.
A readily accessible disconnect device shall be incorporated in the building installation wiring.
Make sure that the power adapter meets the operating voltage requirement before device
powering up the device (The material and length of the power cable might influence the device
voltage).
Prevent the power cable from being trampled or pressed, especially the plug, power socket and
the junction extruded from the device.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
Operating Requirements
Do not aim the device at strong light to focus, such as lamp light and sun light.
Transport, use and store the device within the range of allowed humidity and temperature.
Keep the device away from water or other liquid to avoid damages to the internal components.
Keep sound ventilation to avoid heat accumulation.
Heavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
Pack the device with standard factory packaging or the equivalent material when transporting
the device.
You are recommended to use the device together with lightning arrester to improve lightning
protection effect.
You are recommended to ground the device to enhance reliability.
You are recommended to use qualified video transmission cable to improve video quality, and
use RG59 coaxial cable or higher standard.
WARNING
Use standard components or accessories provided by the manufacturer and make sure that the
device is installed and maintained by professional engineers.
The surface of the image sensor should not be exposed to laser beam radiation in an
environment where a laser beam device is used.
Do not provide two or more power supply sources for the device; otherwise it might damage
the device.
If PoC power supply is used, do not connect any other device between the device and PoC
transceiver including UTC, Balun, optical transceiver, distributor and convertor and so on;
otherwise, the device might get burned.
PoC supply voltage is up to 52V. Do not dismantle the device during normal operation;
otherwise it might cause danger to both device and users due to high voltage.
IV
Table of Contents
Foreword I.....................................................................................................................................................
Important Safeguards and Warnings ........................................................................................................ III
1 Overview ....................................................................................................................................................1
Introduction................................................................................................................................................. 1 1.1
Application ................................................................................................................................................... 1 1.2
Transmission Distance .................................................................................................................................. 2 1.3
2 Cable Connection ........................................................................................................................................3
Power Output 3 ..............................................................................................................................................2.1
12 VDC Power Input Port ............................................................................................................................. 3 2.2
24 VAC Power Input Port 3 .............................................................................................................................2.3
Video Output Port ........................................................................................................................................ 4 2.4
Audio Input Port 4 ..........................................................................................................................................2.5
Alarm Output Port ....................................................................................................................................... 4 2.6
DIP Switch .................................................................................................................................................... 5 2.7
HD/SD Switch Control Cable ........................................................................................................................ 5 2.8
HDCVI Aviation Connector ........................................................................................................................... 5 2.9
3 General Configuration and Operation ..........................................................................................................7
Entering XVR Main Menu ............................................................................................................................. 7 3.1
Setting Audio Input ...................................................................................................................................... 7 3.2
Operating PTZ Control Panel ........................................................................................................................ 8 3.3
3.3.1 Operating OSD Menu ....................................................................................................................... 8
3.3.2 Operating Auto Focus (AF) ............................................................................................................. 10
4 Full-Color Camera Configuration ................................................................................................................ 11
Enabling/Disabling Smart Light .................................................................................................................. 11 4.1
Configuring Smart Light Adjustment.......................................................................................................... 11 4.2
5 Smart Dual Illuminators Cameras Configuration ......................................................................................... 12
6 Temperature and Humidity Camera Configuration ...................................................................................... 14
Enabling/Disabling Temperature and Humidity ......................................................................................... 14 6.1
Configuring Temperature Monitoring Mode ............................................................................................. 14 6.2
Adjusting Temperature and Humidity Display ........................................................................................... 14 6.3
Viewing Temperature and Humidity .......................................................................................................... 15 6.4
7 Active Deterrence Camera Configuration ................................................................................................... 16
Detection Range of PIR Detector ............................................................................................................... 16 7.1
Configuring Trigger Mode .......................................................................................................................... 16 7.2
Configuring Light Warning and Audio Alarm ............................................................................................. 17 7.3
Configuring Smart Dual Illuminators Active Deterrence Camera .............................................................. 17 7.4
8 Gateway Camera Configuration ................................................................................................................. 20
Connecting Node Devices on OSD menu................................................................................................... 20 8.1
Connecting Node Devices on XVR.............................................................................................................. 20 8.2
9 Box Camera Installation ............................................................................................................................22
Lens Installation ......................................................................................................................................... 22 9.1
9.1.1 Installing Lens Type 1 ..................................................................................................................... 22
9.1.2 Installing Lens Type 2 ..................................................................................................................... 23
I/O Port Installation ................................................................................................................................... 24 9.2
V
9.2.1 Connecting Cable ........................................................................................................................... 24
9.2.2 Removing Cable ............................................................................................................................. 24
Device Installation ...................................................................................................................................... 24 9.3
10 Fisheye Camera Configuration ................................................................................................................. 26
Fisheye Dewarp on the Live Interface ...................................................................................................... 26 10.1
Fisheye Dewarp During Playback ............................................................................................................. 27 10.2
11 FAQ ........................................................................................................................................................28
PoC Power Supply .................................................................................................................................... 28 11.1
Long Distance Power Supply .................................................................................................................... 28 11.2
Centralized Power Supply ........................................................................................................................ 28 11.3
Connector Waterproof Protection ........................................................................................................... 29 11.4
Maintenance ............................................................................................................................................... 31
Appendix 1 Cybersecurity Recommendations ............................................................................................... 32
1
1 Overview
Introduction 1.1
The devices comply with the HDCVI standard and support the transmission of video and control
signal over coaxial cable. The devices produce video signal with megapixel resolution and require
connected XVRs -to achieve high speed, long-distance, and zero-lag transmission of the signal. They
are applicable to various scenes, such as roads, warehouses, underground parking lots, bars,
pipelines s. , and gas station
Application 1.2
Application scenario Figure 1-1
Table 1-1 a Description of the pplication
No. No. No. Name Name Name
1 8 (Optional) Lens Display Screen 15 Splicer
2 HDCVI Products 9 Direct Connection 16 Convertor
3 (Optional) Surge
Protection Device 10 Integrated Video
Platform 17 Ethernet
4 (Optional) Optical
Transceiver (Send) 11 18 Matrix Splicing
Screen
5 (Optional) Optical
Transceiver (Receive) 12 19 Matrix Display
Screen
6 (Optional) Distributor — — 13 Switch
7 — — HCVR Products 14 Splicing Screen
2
Transmission Distance 1.3
Table 1-2 Transmission distance
Cable 720P 1080P 4MP/4K
Coaxial Cable RG6 (75 1200 m 800 m 700 m-5)
RG59 (75-3) 800 m 500 m 500 m
UTP CAT6 450 m 300 m 300 m
Table 1-3 Transmission distance of PoC HDCVI powered by PoC XVR
Po Po C XVR Series C Mode RG59 RG6
Full series AT m m 100 100
AF m m 200 200
3
2 Cable Connection
Cable types might vary with different cameras, and the actual product shall prevail.
Power Output 2.1
Supplies 12 VDC power.
Ensure that power consumption of devices connected to this port is below 2 W.
Ensure that supply frequency of devices connected to this port is higher than 1 MHz, such as
sound pick-up, temperature/humidity sensor and other devices without power consumption
change. It might cause image flickering if this port is connected to devices with supply
frequency less than 1 hMHz, such as fan, all sensor, loudspeaker, motor and other
electromechanical devices with power consumption change.
Power output Figure 2-1
12 V DC Power Input Port2.2
Inputs V12 DC power.
Device abnormity or damage could occur if power is not supplied correctly for 12 VDC power input
port. Be sure to supply power as instructed in the manual.
12 VDC power input port Figure 2-2
24 VAC Power Input Port 2.3
Inputs 24 VAC power.
Device abnormity or damage could occur if power is not supplied correctly. Please be sure to supply
4
power as instructed in the manual.
24 VAC power input port Figure 2-3
Video Output Port 2.4
Connects to the XVR to output video signal.
WARNING
When the device is in the condition of PoC power supply, do not connect any other device
between the device and PoC XVR or PoC transceiver including UTC, Balun, optical transceiver,
distributor and convertor and so on; otherwise, the device might get burned.
PoC power supply is with high voltage. Do not dismantle the device during normal operation;
otherwise it might cause danger to both device and users due to high voltage.
Video output port Figure 2-4
Audio Input Port 2.5
Connects to sound pickup devices to receive analog audio signal.
Audio input port Figure 2-5
Alarm Output Port 2.6
Connects to external alarm devices such as siren to trigger alarms.
Alarm output port Figure 2-6
5
DIP Switch 2.7
Dial switches to change output mode. Switch up indicates "ON", and switch down indicates "OFF."
DIP switch Figure 2-7
Table 2-1 Operations of DIP switch
Switch1 Switch2 Output Mode
OFF OFF CVI
ON ON CVBS
ON OFF AHD
OFF ON TVI
HD/SD Switch Control Cable 2.8
When the HD/SD switch control cable forms a short circuit, video output mode switches from HD to
SD. On the contrary, it will switch back to HD video output when the cable forms an open circuit.
HD/SD switch control cable Figure 2-8
The HD/SD switch control cable is available on select models.
HDCVI Aviation Connector 2.9
Aviation c or onnect could strengthen the connection of mobile devices and provide four rpo ts for
your convenience.
HDCVI aviation connector Figure 2-9
6
Table 2-2 a HDCVI viation connector components
No. No. Name Name
1 (Yellow): Video 3 (White): Video Ground
2 4 (Red): (Black): Power Ground Power
7
3 General Configuration and Operation
Power up the device and connect it to the live the XVR with coaxial cable, and then interface is
displayed. Then you can start configuring HDCVI cameras on the XVR.
The No. of the coaxial port will display at the lowers on XVR -left corner of each window to
indicate the corresponding camera.
Ports might vary depending on the XVR models, and the actual product shall prevail.
Entering XVR Main Menu 3.1
Right-click on the live interface, and the shortcut menu is displayed. Step 1
Click Main Menu and then log in to the system. The m main enu of XVR is displayed.Step 2
XVR main menu Figure 3-1
Setting Audio Input 3.2
Audio input is available on select models.
On . the Main Menu interface, select CAMERA > ENCODE > EncodeStep 1
On the Channel l -drop down list, select the device that you want to configure according to Step 2
the coaxial port No.
8
Under Main Stream, click More Setting. Step 3
Encode setting Figure 3-2
On the More Setting interface, enable Audio Encode function and then configure the Step 4
audio settings. In the Audio Format list, leave it as default; in the list, selectAudio Source
HDCVI.
Click Save. Step 5
More setting Figure 3-3
On , . the Encode interface click ApplyStep 6
Operating PTZ Control Panel 3.3
3.3.1 Operating OSD Menu
The OSD menus of different cameras might vary, and the actual product shall prevail.
When you use OSD menu to restore the device to default settings, the resolution, mode, frame
rate and language of the device will not be restored.
On - t the live interface, right click he device that you want to configure. The shortcut menu is Step 1
9
displayed.
Shortcut menu Figure 3-4
Click PTZ and click to extend the menu. Step 2
PTZ setting options Figure 3-5
Click . The MENU OPERATION panel is displayed. Step 3
Menu Operation panel Figure 3-6
10
Table 3-1 Menu operation panel function
Button Function Button Function
Enter Enter or confirm an item , Select item
Cancel Exit OSD menu , Change item value
The OSD menu of the corresponding device is displayed on the live interface. If the value of OSD
item is " ", click Enter to go to the next level of this item. Click Return to go back to the previous
level. Click Cancel to exit OSD menu without saving the modifications.
OSD menu Figure 3-7
3.3.2 Operating Auto Focus (AF)
Table 3 Parameter of AF-2
Parameter Description
Zoom
: Zoom out.
: Zoom in.
Focus
: Focus far.
: Focus near.
Iris
: Auto focus.
: Open OSD menu.
PTZ movement Supports eight directions.
Click , and then you can control the four directions (left, right, up,
and down) of PTZ through mouse operation.
Click to unfold PTZ control panel.
11
4 Color Camera Full- Configuration
This chapter introduces how to configure the working modes of smart light, including auto and
manual. l Smart ight thewill change brightness of white light automatically according to the ambient
lighting condition to avoid over- . - exposure Smart light is only available for full color camera.
Enabling/Disabling Smart Light 4.1
Smart light is enabled by d , enter OSD menuefault. To switch the mode of smart light ( -7) Figure 3 and
select Light > Smart Light.
Configuring Smart Light Adjustment4.2
In the s lmart ight mode, configure the maximum brightness level of the smart light, and the device
will change brightness automatically according to the ambient lighting condition. You can also
configure the sensitivity of the smart light.
Configuring Brightness Level
O . n the OSD menu, select Light > Smart Light > LevelStep 1
Select from 1 5 to to configure the maximum brightness level. Step 2
The maximum brightness level is 5 . by default
Click Return and then Exit to exit the configuration. Step 3
You can also configure the brightness level manually in Light > Manual > Level.
Configuring Sensitivity
Select Light > > . Smart Light SensitivityStep 1
Select from 1 5 to to configure the sensitivity value of the smart light. Step 2
The higher the value is, the easier the smart light will be woken up.
The sensitivity value is 3 by default.
Click Return and then Exit to exit the configuration. Step 3
12
5 CameraSmart Dual Illuminators s Configuration
Smart dual illuminators camera supports three light modes: Smart IR&WL, , . WL mode IR mode
On the OSD menu, select Illuminator, and then view the three different modes.
Smart IR&WL: Turn on the IR light in low ambient brightness. If SMD or IVS has been associated
with smart dual illuminators cameras, and when the SMD detects people and vehicles on the
screen, or perimeter rules are triggered IVS, then the camera will be contr by the olled to turn on
the warm light the , and the screen automatically switch to full-color. When SMD or IVS has
detected that no rules are triggered by people and vehicles, the camera will turn off the warm
light and turn on the IR light to switch to the black & white night vision.
WL mode: If the screen is full-color in low ambient brightness, then the camera is a full-color
camera.
IR mode: If the screen is black & white in low ambient brightness, then the camera is an IR
camera.
Smart IR& WLFigure 4-1
13
WL mode Figure 4-2
IR modeFigure 4-3
14
6 Temperature and Humidity Camera
Configuration
Temperature and humidity camera can measure the ambient temperature and humidity and display
the value on the live interface.
Enabling/Disabling Temperature and Humidity 6.1
O (n the OSD menu Figure 3-7) , select Advanced > . Temp & Humidity to enable and disable the
function. You can view real-time temperature and humidity in the image.
Configuring Temperature Monitoring Mode6.2
The temperature and humidity camera supports temperature correction under strong light outdoors.
You can change the temperature monitoring mode.
E nable Temp. & Humidity. Step 1
Select Standard or Sunlight in the Measure Mode to change the temperature m onitoringStep 2
mode. Standard is set by default.
You are recommended to change the mode into Standard or Sunlight when the camera is
used indoors or outdoors respectively.
Adjusting Temperature and Humidity Display 6.3
S > elect Advanced Temperature & Humidity > Location . on the OSD menuStep 1
Make sure that the temperature and humidity function is enabled.
Click the direction buttons on the PTZ menu . to change the display locationStep 2
C lick Enter to save the configuration. Step 3
15
Adjust temperature and humidity displayFigure 6-1
Right- click anywhere on the monitoring image to return to the previous interface after all the
settings are completed.
Viewing Temperature and Humidity 6.4
Right-click on the live interface to enter XVR main menu ( -1). Figure 3Step 1
Select IoT > REALTIME DISPLAY, -and then you can view the real time temperature and Step 2
humidity.
View temperature and humidity Figure 6-2
For details, see XVR user’s manual.
16
7 Active Deterrence Camera Configuration
Active deterrence camera can warn off intruders actively with LED even before users are aware of the
incident. Once an intrusion is detected, the LED will be turned on to alert the intruder .
Detection Range of PIR Detector7.1
The horizontal detection range of the sensor is 100° 110°. or
Horizontal detection range Figure 7-1
The vertical detection distance of the sensor is 2 m– , – – 10 m 1 m 14 m or 1 m 12 m.
Vertical detection distance Figure 7-2
Configuring Trigger Mode 7.2
O ( -7)n the OSD menu Figure 3 , select Alert > Trigger Mode.
If you select and light alarm will be triggered in the device.Camera Set, the sound
If you select , the sound and light alarm will be triggered in the XVR.XVR Set
For more information about XVR Set, see user’s manual of XVR.
17
Configuring Light Warning and Audio Alarm7.3
This function is available only when the trigger mode is set to Camera Set.
O ( -7) . n the OSD menu Figure 3 , select Alert Set Light Warning to ON, and then enter the item.
For Mode, You can select from Lighting . to Flash
If you select , you can set the Flash Flash Frequency to Low, Medium or High.
For Alert Duration, you can adjust from 5 seconds to 60 seconds.
On the Audio Alert item, set it to ON, and then enter the item.
In the Audio item, you can select from three audios.
You can contact after sales support to customize alarm audios.-
In the Volume item, you can select from Low, Medium . and High
In the Alert Duration, you can adjust from 5 seconds to 60 seconds.
Configuring Smart Dual Illuminators Active Deterrence 7.4
Camera
For details on configuring s d imart ual lluminators, see "5 Smart Dual Illuminators Cameras
Configuration".
Select Main Menu > Alert, and then set to Audio Alert ON. Step 1
S . et the Volume and Alert DurationStep 2
The shortest a dof lert uration is 5 s, and the longest is 60 s.
Select 5 different audio clips (including Alarm, , No parking here Private land no entry, Step 3
Warning zone keep off, and Welcome).
You can also DIY the first clip to a .bin file and import to the back- end to use.
18
Main m enuFigure 7-3
Alert Figure 7-4
19
Audio a lertFigure 7-5
Select Main Menu > Alert, and then set Light Warning to ON. Step 4
S . et the Flash Freq and Alert DurationStep 5
The shortest a dof lert uration is 5 s, and the longest is 60 s.
Light warning Figure 7-6
21
Add sensor pairing (1) Figure 8-1
In the Access Type list, select Camera Gateway. Step 3
Click Pair, and the device enters pairing mode.Step 4
Operate the node device and enter pairing mode.
Add sensor pairing (2) Figure 8-2
Click Back. Step 5
Click to modify the device name; click to delete node device.
Connected device Figure 8-3

Produktspezifikationen

Marke: Dahua Technology
Kategorie: Überwachungskamera
Modell: HAC-HFW1809T-A-LED

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dahua Technology HAC-HFW1809T-A-LED benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Dahua Technology

Dahua Technology

Dahua Technology Ultra IPC-HF7842F Bedienungsanleitung

8 Oktober 2024
Dahua Technology

Dahua Technology Lite IPC-HDW1320S Bedienungsanleitung

4 Oktober 2024
Dahua Technology

Dahua Technology Ultra IPC-HF7442F-FR Bedienungsanleitung

4 Oktober 2024
Dahua Technology

Dahua Technology SD49225T-HN-W Bedienungsanleitung

23 September 2024
Dahua Technology

Dahua Technology DH-HAC-HDW1230T-Z Bedienungsanleitung

22 September 2024
Dahua Technology

Dahua Technology Pro HAC-HFW2221SP-0280B Bedienungsanleitung

17 September 2024
Dahua Technology

Dahua Technology SD5A825GA-HNR Bedienungsanleitung

15 September 2024
Dahua Technology

Dahua Technology SDT5X425-4Z4-QA-2812 Bedienungsanleitung

13 September 2024
Dahua Technology

Dahua Technology Pro PTZ12240-LR8-N Bedienungsanleitung

11 September 2024
Dahua Technology

Dahua Technology Pro HAC-HFW2231BP-0360B Bedienungsanleitung

10 September 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024