Dahua Technology DH-IPC-HDW8341XN-3D-S2 Bedienungsanleitung

Dahua Technology Überwachungskamera DH-IPC-HDW8341XN-3D-S2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dahua Technology DH-IPC-HDW8341XN-3D-S2 (11 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/11

Dahua Stereo Vision Network Camera Quick Start Guide

Dahua Stereo Vision Network Camera

Quick Start Guide

Version 1.0.0

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD

Dahua Stereo Vision Network Camera Quick Start Guide

Welcome

Thank you for purchasing our Network camera!

This user’s manual is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user s manual well for future reference! ’

Important Safeguards and Warnings

1 Electrical safety

．

．．

 All installation and operation here should conform to your local electrical safety codes.

 Please check if the power supply is correct before operating the device.

 The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the

Limited power source is rated DC 12V or AC 24V in the IEC60950-1. (Power supply requirement is

subject to the device label).

 Please install easy- -use device for power off before installing wiring, which is for emergent power to

o when necessary.

 Please prevent the line cord from being trampled or pressed, especially the plug, power socket and

the junction from the device.

 Do not connect these two power supplying sources to the device at the same time; it may result in

device damage!

 We assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

 We are not liable for any problems caused by unauthorized modication or attempted repair.

2 Environment

．

．．

 Please don’t aim the device at strong light (such as lighting, sunlight and so on) to focus; otherwise

it may cause overexposure (It is not the device malfunction), which will aect the longevity of CCD

or CMOS.

 Please transport, use and store the device within the range of allowed humidity and temperature.

 Please don’t keep the device in a place which is wet, dusty, extremely hot, and extremely cold and

with strong electromagnetic radiation or unstable lighting.

 Please do not allow water and other liquid falling into the camera in case that the internal

components are damaged.

 Please do not allow rain or damp to the indoor device in case re or lightning may occur.

 Please keep the sound ventilation in case of heat accumulation.

 Please pack the device with standard factory packaging or material with same quality when

transporting the device.

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

Dahua Stereo Vision Network Camera Quick Start Guide

3. Operation and Daily Maintenance

 Please do not touch the heat dissipation component of the device directly in order to avoid scald.

 Please do not dismantle the device; there is no component which can be xed by users themselves

in the machine. It may cause water leakage or bad image for the device due to unprofessional

dismantling. Please contact after-sale service to replace desiccant if it becomes green.

 It is recommended to use the device with thunder proof device in order to improve thunder proof

eect.

 The grounding holes of the product are recommended to be grounded to further enhance the

reliability of the camera.

 Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean the dust

or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust gently if

it is necessary to clean.

 Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to

dilute the mild detergent rst and then use it to clean the device. Finally use the dry cloth to clean

the device. Don t use volatile solvent like alcohol, benzene, thinner and etc or strong detergent with ’

abrasiveness, otherwise it will damage the surface coating or reduce the working performance of

the device.

 Dome cover is an optical device, please touch or wipe cover surface directly during don’t

installation and use, please refer to the following methods to deal with once dirt is found:

 Stained with dirt

 Use oil-free soft brush or hair dries to remove it gently.

 Stained with grease or ngerprint

 Use soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton cloth or

paper soaked with alcohol or detergent to wipe from the lens center to outward. It is ok to change

the cloth and wipe several times if it is not clean enough.

Warning

 Please modify the default password after login in order to avoid being stolen.

 Please use the standard accessories provided by manufacturer and make sure the device is

installed and xed by professional engineers.

 Please prevent the device surface from the radiation of laser beam when using laser beam device.

 Please do not provide two or more power supply modes for the device, otherwise it may cause

damage to the device.

Statement

 Please refer to the actual product for more details; the manual is just for reference.

 The manual will be regularly upgraded according to the product update; the upgraded content will

be added in the manual without prior announcement.

 Please contact the supplier or customer service if there is any problem occurred when using the

device.

Produktspezifikationen

Marke:	Dahua Technology
Kategorie:	Überwachungskamera
Modell:	DH-IPC-HDW8341XN-3D-S2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dahua Technology DH-IPC-HDW8341XN-3D-S2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Überwachungskamera Dahua Technology

Dahua Technology Ultra IPC-HF7842F Bedienungsanleitung

8 Oktober 2024

Dahua Technology Lite IPC-HDW1320S Bedienungsanleitung

4 Oktober 2024

Dahua Technology Ultra IPC-HF7442F-FR Bedienungsanleitung

4 Oktober 2024

Dahua Technology SD49225T-HN-W Bedienungsanleitung

23 September 2024

Dahua Technology DH-HAC-HDW1230T-Z Bedienungsanleitung

22 September 2024

Dahua Technology Pro HAC-HFW2221SP-0280B Bedienungsanleitung

17 September 2024

Dahua Technology SD5A825GA-HNR Bedienungsanleitung

15 September 2024

Dahua Technology SDT5X425-4Z4-QA-2812 Bedienungsanleitung

13 September 2024

Dahua Technology Pro PTZ12240-LR8-N Bedienungsanleitung

11 September 2024

Dahua Technology Pro HAC-HFW2231BP-0360B Bedienungsanleitung

10 September 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024