Ctek MXT 14 Bedienungsanleitung
Ctek
LadegerÀt
MXT 14
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Ctek MXT 14 (6 Seiten) in der Kategorie LadegerĂ€t. Dieser Bedienungsanleitung war fĂŒr 41 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
EN
ENââąâ3
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3.îPress the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is ready to start the engine when is lit.
The battery is fully charged when is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
MANUAL
ABSORPTION, READY TO USE
ANALYSE
NORMAL
BAT TERY
PROGRAM
ERROR LAMP
RECOND
PROGRAM
SUPPLY
PROGRAM
POWER
LAMP
MODE-
BUTTON
DESULPHATION
SOFT START
BULK FLOAT, FULLY CHARGED
PULSE, MAINTENANCE CHARGING
TEMPERATURE
SENSOR
INDICATOR
24V/14A
MXT 14
MODE
SUPPLYNORMAL RECOND
RECOND
SUPPLY
24V/14A
MXT 14
MODE
SUPPLYNORMAL RECOND
RECOND
SUPPLY
SUPPLY PLUG*
L: 2000 mm
TEMPERATURE
SENSOR
CONGRATULATIONS
to the purchase of your new professional switch mode battery
charger. This charger is included in a series of professional
chargers from CTEK SWEDEN AB and represents the latest
technology in battery charging.
MAINS CABLE
*Supply plugs may differ to suit your wall socket.
20015551E MXT 14, Manual EU, Print file 001.indd 3 2013-07-23 11:31:02
4ââąâEN
BATTERY SIZE (Ah) TIME TO 80% CHARGED
30Ah 2h
100Ah 6h
200Ah 12h
300Ah 17h
READY TO USE
The table shows the estimated time for empty battery to 80% charge
CHARGING PROGRAMS
Settings are made by pressing the MODE-button. After about two seconds the charger
activates the selected program. The selected program will be restarted next time the
charger is connected.
The table explains the different Charging Programs:
Program Battery
Size (Ah) Explanation Temp range
NORMAL 28â500Ah
Normal battery program
28.8V/14A. Use for WET batteries,
Ca/Ca, MF and for most GEL batteries
+5°Câ+50°C
(41ÂșFâ122ÂșF)
RECOND 28â500Ah
Recond program 31.6V/1.5A
Use to return energy to the empty
WET and Ca/Ca batteries. Recond
your battery once per year and after
deep dischare to maximise lifetime and
capacity. The Recond program adds the
Recond step to the normal battery
program. Frequent use of the Recond
program may cause water loss in the
batteries and reduce service life of
electronics. Contact your vehicle and
battery supplier for advice.
-20°Câ+50°C
(-4ÂșFâ122ÂșF)
28â500Ah
Supply program 27.2V/14A
Use as 24V power supply or use for
float maintenance charging when 100%
capacity of the battery is required.
Supply program activates Float step
without time or voltage limitation.
-20°Câ+50°C
(-4ÂșFâ122ÂșF)
ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead connected to the batterys
positive pole?
2. Is the charger connected to a 24V battery?
3. Has charging been interrupted in or ?
Restart the charger by pressing the MODE-button. If charging is still
being interrupted, the battery...
...is seriosly sulphated and may need to be replaced.
...can not accept charge and may need to be replaced.
...can not keep charge and may need to be replaced.
WARNING!
The spark protection on the battery charger
is disabled during SUPPLY program.
TEMPERATURE SENSOR
The MXT 14 is equipped with an external temperature sensor. Activated
temperature sensor will be indicated by a lit temperature sensor indicator
lamp. The temperature sensor will adjust the voltage to the ambient
temperature. Place the temperature sensor in the positive clamp or as the
close to the battery as possible.
POWER LAMP
If the power lamp is lit with a:
1. STEADY LIGHT
The mains cable is connected to the wall socket.
2. FLASHING LIGHT:
The charger has entered the energy save mode. This happens if the
charger isnÂŽt connected to the battery in 2 minutes.
20015551E MXT 14, Manual EU, Print file 001.indd 4 2013-07-23 11:31:03
EN
ENââąâ5
STEP 1 DESULPhaTiOn
Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead
plates of the battery restoring the battery capacity.
STEP 2 SOFT STarT
Tests if the battery can accept charge. This step prevents that charging proceeds with a
defect battery.
STEP 3 BULk
Charging with maximum current until approximately 80% battery capacity.
STEP 4 aBSOrPTiOn
Charging with declining current to maximize up to 100% battery capacity.
STEP 5 anaLYSE
Tests if the battery can hold charge. Batteries that can not hold charge may need to be replaced.
STEP 6 rEcOnD
Choose the Recond program to add the Recond step to the charging process. During the Recond step
voltage increases to create controlled gasing in the battery. Gasing mixes the battery acid and gives
back energy to the battery.
STEP 7 FLOaT
Maintaining the battery voltage at maximum level by providing a constant voltage charge.
STEP 8 PULSE
Maintaining the battery at 95â100% capacity. The charger monitors the battery voltage and gives a
pulse when necessary to keep the battery fully charged.
1
VOLTAGE (V)CURRENT (A)
ANALYSE RECOND PULSE
DESULPHATION BULK ABSORPTIONSOFT START
28.8V 14A until 27.2V Increasing voltage
to 28.8V @ 25°C
14A
1 7
Limit: Max 20h Max 12h 3 minutes 30 min or 4h
depending on
battery voltage
10 days
Charge cycle restarts
if voltage drops*
Charge cycle restarts
if voltage drops
Max 4h
28.8V 14A until 27.2V Increasing voltage
to 28.8V @ 25°C
14A
28.8V @ 25°C
Declining current
28.8V @ 25°C
Declining current
Checks if voltage
drops to 24V
Checks if voltage
drops to 24V
Max 27.2V
14A
27.2V
14A
27.2V
14A
25.8Vâ28.8V
10â2.3A
25.8Vâ28.8V
10â2.3A
Max 4h
2 3 4 5
FLOAT
6 8
RECOND
SUPPLY
NORMAL
Max 31.6V
1.5A
*Supply program is not time or voltage limited.
charging PrOgraM
20015551E MXT 14, Manual EU, Print file 001.indd 5 2013-07-23 11:31:03
Produktspezifikationen
Marke: | Ctek |
Kategorie: | LadegerÀt |
Modell: | MXT 14 |
Breite: | 130 mm |
Tiefe: | 235 mm |
Gewicht: | 1900 g |
Produktfarbe: | Blue, Silver |
Höhe: | 65 mm |
Betriebstemperatur: | -20 - 50 °C |
Akku-/Batteriespannung: | 2 V |
Kabelfarbe: | Schwarz |
Eingangsspannung: | 220-240 V |
Eingangsfrequenz: | 50/60 Hz |
Ladestrom: | 14 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ctek MXT 14 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung LadegerÀt Ctek
3 Mai 2023
3 Mai 2023
29 April 2023
26 April 2023
26 April 2023
26 April 2023
26 April 2023
26 April 2023
26 April 2023
26 April 2023
Bedienungsanleitung LadegerÀt
- LadegerÀt Anker
- LadegerÀt Basetech
- LadegerÀt Belkin
- LadegerÀt Gembird
- LadegerÀt Manhattan
- LadegerÀt Nedis
- LadegerÀt Sony
- LadegerÀt Tevion
- LadegerÀt Watson
- LadegerÀt Panasonic
- LadegerÀt Voltcraft
- LadegerÀt Bosch
- LadegerÀt Laserliner
- LadegerÀt Vonroc
- LadegerÀt AEG
- LadegerÀt TechniSat
- LadegerÀt Velleman
- LadegerÀt Technaxx
- LadegerÀt Alecto
- LadegerÀt Black And Decker
- LadegerÀt Trotec
- LadegerÀt Schneider
- LadegerÀt Einhell
- LadegerÀt Tronic
- LadegerÀt JVC
- LadegerÀt Shure
- LadegerÀt TERRIS
- LadegerÀt Xiaomi
- LadegerÀt Hikoki
- LadegerÀt Hitachi
- LadegerÀt Horizon
- LadegerÀt Hyundai
- LadegerÀt Tesla
- LadegerĂ€t GĂŒde
- LadegerÀt Varta
- LadegerÀt Amprobe
- LadegerÀt Goobay
- LadegerÀt Waeco
- LadegerÀt Ansmann
- LadegerÀt Nitecore
- LadegerÀt Fujifilm
- LadegerÀt Globaltronics
- LadegerÀt Zipper
- LadegerÀt Enduro
- LadegerÀt EUFAB
- LadegerÀt GYS
- LadegerÀt ABB
- LadegerÀt Delta
- LadegerÀt Milwaukee
- LadegerÀt Traxxas
- LadegerÀt Norauto
- LadegerÀt Navitel
- LadegerÀt HQ
- LadegerÀt AccuPower
- LadegerÀt Projecta
- LadegerÀt NOCO
- LadegerÀt Ozito
- LadegerÀt EnerGenie
- LadegerÀt Cellular Line
- LadegerÀt HÀhnel
- LadegerÀt Shimano
- LadegerÀt Multiplex
- LadegerÀt Oukitel
- LadegerÀt Samlex
- LadegerÀt Schaudt
- LadegerÀt Spektrum
- LadegerÀt Steren
- LadegerÀt Tecmate
- LadegerÀt Terratec
- LadegerÀt Webasto
- LadegerÀt Xenteq
- LadegerÀt Accele
- LadegerÀt Mean Well
- LadegerÀt LRP
- LadegerÀt IOttie
- LadegerÀt Zens
- LadegerÀt H-Tronic
- LadegerÀt Rossi
- LadegerÀt EcoFlow
- LadegerÀt Hamron
- LadegerÀt Akyga
- LadegerÀt Wallbox
- LadegerÀt Absaar
- LadegerÀt SWIT
- LadegerÀt Manson
- LadegerÀt Novitec
- LadegerÀt Minn Kota
- LadegerÀt Tycon Systems
- LadegerÀt EO
- LadegerÀt Lenmar
- LadegerÀt Kaco
- LadegerÀt TSUN
Neueste Bedienungsanleitung fĂŒr -Kategorien-
17 April 2024
14 April 2024
14 April 2024
12 April 2024
8 April 2024
8 April 2024
8 April 2024
6 April 2024
3 April 2024
2 April 2024