Ctek MXS 5.0 Bedienungsanleitung

Ctek Ladegerät MXS 5.0

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ctek MXS 5.0 (6 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

EN • 3

MODE

RECONDAGM

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging.

CTEK COMFORT CONNECT eyelet M6–

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT clamp–

CHARGE CABLE

SUPPLY PLUG*

* Supply plugs may differ to suit your wall socket.

SMALL

BATTERY

PROGRAM

ERROR LAMP

NORMAL

BATTERY

PROGRAM

FULLY CHARGEDREADY TO USE

AGM

OPTION RECOND

OPTION

POWER LAMP

HOW TO CHARGE

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery or

charger will not be damaged.

3. Press the MODE-button to select charging program.

SMALL BATTERY PROGRAM NORMAL BATTERY PROGRAM

Continue to press the MODE-button to combine charging program with charging options.

AGM OPTION REC ND OPTIONO

Press the MODE-button several times until the desired combination of charging program and

options are lit.

4. Follow the 8-step display through the charging process.

The battery is ready to start the engine when STEP 4 is lit.

The battery is fully charged when STEP 7 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE BUTTON

MANUAL

AGM

4 • EN

BATTERY SIZE (Ah) TIME TO 80% CHARGED

2Ah 2h

8Ah 8h

20Ah 4h

60Ah 12h

110Ah 26h

READY TO USE

The table shows the estimated time for empty battery to 80% charge.

CHARGING PROGRAMS

Settings are made by pressing the MODE-button. After about two seconds the charger acti-

vates the selected program. The selected program will be restarted next time the charger

is connected.

The table explains the diﬀerent Charging Programs:

Program Battery

Size (Ah) Explanation Temp range

1.2–14Ah

Small battery program

14.4V/0.8A

Use for smaller batteries.

-20°C–+50°C

(-4ºF–122ºF)

14–160Ah

Normal battery program

14.4V/5A

Use for WET batteries, Ca/Ca,

MF, GEL batteries and many

AGM batteries.

-20°C–+50°C

(-4ºF–122ºF)

14–160Ah

AGM option

14.7V/5A

Use for charging most AGM batt-

eries like Optima and Odyssey.

-20°C–+50°C

(-4ºF–122ºF)

RECOND 14–160Ah

Recond option 15.8V/1.5A

Use to return energy to the empty

WET and Ca/Ca batteries.

Recond your battery once per

year and after deep discharge to

maximise lifetime and capacity.

The Recond program adds

STEP 6 to the normal battery

program.

-20°C–+50°C

(-4ºF–122ºF)

ERROR LAMP

If the error lamp is lit, check the following:

1. Is the chargers positive lead connected to the battery´s

positive pole?

2. Is the charger connected to a 12V battery?

3. Has charging been interrupted in STEP 1, 2 or 5?

Restart the charger by pressing the MODE-button. If charging is still

being interrupted, the battery...

STEP 1: ...is seriously sulphated and may need to be replaced.

STEP 2: ...can not accept charge and may need to be replaced.

STEP 5: ...can not keep charge and may need to be replaced.

AGM

POWER LAMP

If the power lamp is lit with a:

1. STEADY LIGHT

The mains cable is connected to the wall socket.

2. FLASHING LIGHT

The charger has entered the energy save mode. This happens if the

charger isn't connected to a battery in 2 minutes.

EN • 5

CHARGING PROGRAMS AND OPTIONS COMBINATIONS

DESULPHATION SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE

Current (A) Voltage (V)

15.8V 0.8A until 12.6V Increasing voltage to

14.4V. 0.8A

Declining current

14.4V

Checks if voltage

drops to 12V

13.6V

0.8A

12.7V–14.4V

0.8–0.3A

AGM

15.8V 0.8A until 12.6V Increasing voltage to

14.7V. 0.8A

Declining current

14.7V

Checks if voltage

drops to 12V

13.6V

0.8A

12.7V–14.7V

0.8–0.3A

RECOND

15.8V 0.8A until 12.6V Increasing voltage to

14.4V. 0.8A

Declining current

14.4V

Checks if voltage

drops to 12V

Max 15.8V

0.3A

13.6V

0.8A

12.7V–14.4V

0.8–0.3A

AGM

RECOND

15.8V 0.8A until 12.6V Increasing voltage to

14.7V. 0.8A

Declining current

14.7V

Checks if voltage

drops to 12V

Max 15.8V

0.3A

13.6V

0.8A

12.7V–14.7V

0.8–0.3A

15.8V 5A until 12.6V Increasing voltage to

14.4V. 5A

Declining current

14.4V

Checks if voltage

drops to 12V

13.6V

12.7V–14.4V

5–2.5A

AGM

15.8V 5A until 12.6V Increasing voltage to

14.7V. 5A

Declining current

14.7V

Checks if voltage

drops to 12V

13.6V

12.7V–14.7V

5–2.5A

RECOND

15.8V 5A until 12.6V Increasing voltage to

14.4V. 5A

Declining current

14.4V

Checks if voltage

drops to 12V

Max 15.8V

1.8A

13.6V

12.7V–14.4V

5–2.5A

AGM

RECOND

15.8V 5A until 12.6V Increasing voltage to

14.7V. 5A

Declining current

14.7V

Checks if voltage

drops to 12V

Max 15.8V

1.8A

13.6V

12.7V–14.7V

5–2.5A

Time limit: Max 8h Max 20h Max 8h 3 minutes 2h or 6h

10days

Charge cycle restarts

if voltage drops

Charge cycle restarts

if voltage drops

Produktspezifikationen

Marke:	Ctek
Kategorie:	Ladegerät
Modell:	MXS 5.0
Breite:	65 mm
Tiefe:	168 mm
Gewicht:	600 g
Produktfarbe:	Schwarz, Silber
Höhe:	38 mm
Betriebstemperatur:	-20 - 50 °C
Akku-/Batteriespannung:	2 V
Kabelfarbe:	Schwarz
Eingangsspannung:	220-240 V
Eingangsfrequenz:	50/60 Hz
Ladestrom:	5