Ctek Bumper 120 Bedienungsanleitung

Ctek Ladegerät Bumper 120

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ctek Bumper 120 (2 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
WWW.CTEK.COM
CTEK BUMPER
CTEK BUMPER helps protect your CTEK charger from bumps and
scratches. Adds extra grip on slippery surfaces. Made of durable
silicon rubber material. The CTEK BUMPER ts snugly around the
body of your CTEK charger.
BUMPER 10
Suitable for all CTEK chargers 0.8A 40-057
BUMPER 60
Suitable for all CTEK chargers 3.8–5.0. 56-915
BUMPER 100
Suitable for all CTEK chargers 7.0A 40-058
BUMPER 120
Suitable for all CTEK chargers 10A 40-059
CTEK MOUNTING BRACKET
Robust and versatile mounting bracket for practical charger and
cable storage. Open frame design allows easy access to charger
functions.
• Practical storage of charger and cables
• Open frame design allows easy access to charger functions.
• Suitable for all CTEK chargers 3.8–5.0A
Part no. 40-132
FOR OUR VALUED
CUSTOMERS:
SMARTLY DESIGNED ACCESSORIES THAT PROMOTE
USEABILITY, SAFETY, SIMPLICITY AND ADDITIONAL
FUNCTIONALITY
INDICATOR
INDICATOR is the easiest way to monitor the charge in your
battery. An accurate reading for your battery is displayed two
hours after you’ve used your vehicle.
RED means the battery charge is below 12.4 V. It’s definitely
time to charge the battery.
YELLOW means the battery charge is between 12.4 and 12.65 V.
It’s time to start thinking about charging the battery.
GREEN means the battery charge is more than 12.65 V.
OK! No need for charging.
CONNECT
Our products are designed and developed to be as simple
as possible to use. All CTEK chargers are supplied with
our custom quick connector.
ACCESSORIES
CONNECT
– Eyelet
Connect - Eyelet is a handy
accessory that enables you to
charge batteries that are in
hard to reach places or where
using clamps is inconvenient or
impossible. Connect – Eyelet is
easy to t, splash proof and
dust proof. 400mm cable 
length. Compatible with all
CTEK chargers up to 10 A.
Eyelet M6 56-260
Eyelet M8 56-261
Eyelet M10 56-329
CONNECT
– Cig Plug
Connect – Cig Plug is an easy
to fit adapter that allows
charging from a CTEK
compatible charger through
the 12 V cigarette lighter or 
accessory socket. 400 mm 
cable length. Compatible with
all CTEK chargers up to 7 A. 
Connect – Cig Plug is a
universal model that ts both
12mm and 21mm sockets.
Part no. 56-263
Note: Socket must be powered
even when ignition is in ”o”
position.
CONNECT
– Cig Socket
Connect – Cig Socket is a useful
accessory that increases the
usage of the CTEK Connect
battery connector. When the
Connect - Cig Socket has been
connected, it allows you to use
GPS, mobile phones, handlebar
heaters and heated clothing etc.
1 m cable length.
Part no. 56-573
CONNECT
– 2.5M Extension Cable
Useful extension cable which
allows any CTEK charger up to
10A to be connected to other 
accessories such as clamps or
quick connectors (Comfort
Connect). Handy when charger
has to be placed some distance
from the battery.
2.5 m cable length.
Part no. 56-304
INDICATOR
– Eyelet
Indicator – Eyelet M6 and M8
use a simple ‘trac light’
system to show the state of
charge of your battery. With
Indicator – Eyelet you have a
permanent installation. Should
charging be required plug in the
CTEK charger and charge the
battery.
Cable length 500mm.
Current drain: 1,5mA
Current drain/month: 1,1Ah
Eyelet M6 56-629
Eyelet M8 56-382
INDICATOR
– Cig Plug
Indicator – Cig Plug is a
combined quick connector and
indicator for easy charging.
Perfect for checking status and
charging the battery through
the vehicle 12V socket.
400mm cable length. Suitable
for all 12V CTEK chargers up to
7A. Indicator – Cig Plug is a
universal model that ts both
12mm and 21mm sockets.
Current drain: 1,5mA
Current drain/month: 1,1Ah
Part no. 56-870
Note: Socket must be powered
even when ignition is in ”o”
position.
INDICATOR
– Clamp
Indicator – Clamp uses a simple
‘trac light’ system to show
the state of charge of your
battery. Easy to move between
vechicles, – ideal for workshops
and showrooms. Should
charging be required the cap
can be removed from the unit
and a compatible CTEK charger
plugged in to restore the
battery to fully charged status.
Cable length 1.5 m.
Current drain: 1,5mA
Current drain/month: 1,1Ah
Part no. 56-384
INDICATOR
– Panel
Indicator – Panel uses a simple
‘trac light’ system to show
the state of charge of your
battery. Available in two cable
lengths, 1.5m and 3.3m. No
cables are included in the
Indicator – Panel with flat pin
connection.
Current drain: 1,5mA
Current drain/month: 1,1Ah
Panel M8 (1.5 m) 56-380
Panel M8 (3.3 m) 56-531
Panel (Flat Pin) 56-562
Š CTEK SWEDEN AB, 2020-D | EN
ACCESSORIES


Produktspezifikationen

Marke: Ctek
Kategorie: Ladegerät
Modell: Bumper 120

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ctek Bumper 120 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ladegerät Ctek

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung fĂźr -Kategorien-