CRUX CSV-01 Bedienungsanleitung

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr CRUX CSV-01 (1 Seiten) in der Kategorie Bewakingscamera. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
CSV-01
Universal Fender Mount Side View Camera (1 Pair)
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.102819
1 of 1
- No drilling of holes required.
- Sîžźcks on the front fender using 3M double sided tape.
- Can be use on either the le or right side.
PRODUCT FEATURES:
PARTS INCLUDED:
CSV-01 Fender Mount Camera (1 Pair) 10 foot Extension Cable
INSTALLATION DIAGRAM:
WHITE Wire
Cut for right side use
Regulator
Extension Coax Cable
GROUND
RED Wire “B” (Not used)*
Camera
RED Wire (A)
Make sure the arrows
line up and push in
the connectors well.
To Aftermarket Radio
Side Camera Input
OR
Camera Interface
Side Camera Input
*NOTE: Tap RED Wire A to the radio or camera interface +12V camera power output and the black wire to chassis ground.
RED wire B is not used and should be insulated with tape.
WHITE Wire: Connect for left side use. Cut for right side use.
The CSV-01 scks on the fender and the at cable goes into the gap between the fender and the door.
Thoroughly clean the area where the CSV-01 will be installed. Remove the wax to ensure a secure installaîžźon.
Use the double sided tape on the at cable to sck the cable around the rear of the fender.
INSTALLATION INSTRUCTIONS:
Available in Black, Charcoal Gray, Silver & White

Produktspezifikationen

Marke: CRUX
Kategorie: Bewakingscamera
Modell: CSV-01

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX CSV-01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewakingscamera CRUX

Bedienungsanleitung Bewakingscamera

Neueste Bedienungsanleitung fĂĽr -Kategorien-