Clarion DVC920 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Clarion DVC920 (68 Seiten) in der Kategorie Navigator. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/68
Owner’s manual
Mode d’emploi
Manual de instrucciones
POWERDS FADJUSTA-MODESOURCE
R
All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.
Printed in Japan / / Impreso en Japón / Impri au Japon 在曰本印刷
2002/2 (A·K)
GC-951B
280-7804-00
Clarion Co., Ltd.
5.1CH SURROUND DECODER CONTROL UNIT
MODULE DE COMMANDE DE CODEUR
SURROUND 5.1 CANAUX
UNIDAD DE CONTROL DE DESCODIFICADOR DE
5.1CH SURROUND
5.1ch環繞聲解碼控制組件
Thank you for purchasing the product.Clarion
* Please read this owner s manual in its entirety before operating this equipment.
* After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
* Check the contents of the enclosed warranty card and keep it carefully with this manual.
2DVC920
Contents
1. CONFIRM BEFORE OPERATION ................................................................................................... 3
About the registered marks etc. ............................................................................................................ 4
2. SPECIFICATIONS ............................................................................................................................. 4
3. CONTROLS ....................................................................................................................................... 5
4. NOMENCLATURE ............................................................................................................................ 5
Names of Buttons .................................................................................................................................. 5
Control Unit Display ............................................................................................................................... 6
5. OPERATIONS ................................................................................................................................... 7
Basic Operations ................................................................................................................................... 7
Setting Acoustic Features (ADJUST MODE) ........................................................................................ 9
6. WIRING TECHNIQUES ................................................................................................................... 14
How to Wire This Unit .......................................................................................................................... 14
Precautions Regarding Wiring ............................................................................................................ 15
7. Installation ...................................................................................................................................... 16
Installation Location ............................................................................................................................. 16
Installation Procedures ........................................................................................................................ 16
8. System Expansion ......................................................................................................................... 17
Example: DXZ825 + DVD Changer + Monitor .................................................................................... 17
Example: Center Unit + DVD Changer + Monitor ............................................................................... 18
9. IN CASE OF DIFFICULTY .............................................................................................................. 71
280-7804-00
8 DVC920
Basic Operations
ST-96K: Stereo sound with 96kHz sampling
frequency
Lt/Rt: 2-channel audio including surround
sound
1+1: Discrete monaural sound
1/0: Front 1-channel sound
2/0: Front 2-channel sound
2/1: Front 2-channel sound; surround mon-
aural sound
2/2: Front 2-channel sound; surround 2-
channel sound
3/0: Front 3-channel sound
3/1: Front 3-channel sound; surround mon-
aural sound
3/2: Front 3-channel sound; surround 2-
channel sound
*/*+LFE: Low-frequency channel sound
NoSIGNAL: No digital signal is input
————: Current input signal is other than
linear PCM, Dolby digital DTS
Fs ERR: Current signal input has sampling
frequency other than 32kHz, 44.1kHz,
48kHz, or 96kHz.
CLIP: DSP output clipping
Note:
When signals are input from the ANALOG 1 con-
nector or CeNET input connector, they are indi-
cated by the [ ] display.STEREO
DSF setting
DSF (Digital Sound Field) makes it possible
through sound simulation to enjoy the acoustic
experience you would have in a concert hall or a
live performance hall.
Any one of six sound effect patterns can be ap-
plied to the sound in the signal formats DTS,
Dolby Digital, or Linear PCM (or after decoding
Dolby Pro Logic II signals).
The initial setting is [ ].DSF OFF
1. Press the [ ] button.DSF
Each time the [ ] button is pressed, the in-DSF
dications change as shown below.
[DSF OFF] [ ] HALL [ ] CHURCH
[STADIUM] LIVE [ ] [JAZZCLUB]
[THEATER] [DSF OFF]
HALL(Hall):Large concert hall.
CHURCH(Church):Church with a vaulted
ceiling.
STADIUM(Stadium):Large stadium without
roof or walls.
LIVE(Live):Live performance hall, larger than
a jazz club.
JAZZCLUB(Jazzclub):Jazz club with a low
ceiling.
THEATER(Theater):Movie or drama theatre.
The original mode is resumed when the
button is not pressed during a 7 second
interval.
Adjusting the sound volume
balance of each speaker
(AUDIO MODE)
You can adjust the sound image to suit the seat-
ing position and number of passengers.
1. Press the [ ] button.A-MODE
Each time the [ ] button is pressed,A-MODE
the indications change as shown below.
[SUB-W] [CTR] [ ] BAL [ ] FAD
original mode
The original mode is resumed when the but-
ton is not pressed during a 7 second inter-
val.
2. Press the [ ] or [ ] [ ] button to adjustVOL
the value.
SUB-W (Sub woofer):
Adjusts sub woofer volume.
The volume is adjusted in the range –6 to +3.
CTR (Center speaker):
Adjusts center speaker volume.
The volume is adjusted in the range –6 to 0.
BAL (Balance):
Adjusts the sound volume in the left and right
speakers.
The sound volume is adjusted in the range
L13 to R13.
FAD (Fader):
Adjusts the sound volume in the front and rear
speakers.
The sound volume is adjusted in the range
R12 to F12.
Mute
Each time you press the [ ] button, mute isMUTE
turned on and off.
MUTEappears when mute is turned on.
1. CONFIRM BEFORE OPERATION
DVC920 3
2.
Cont
Power
Ground
Curren
Weigh
Dimen
6 5/
(160 m
Note:
• Spec
witho
• Manu
ratori
“Dolb
trade
Abo
This component has not been designed to operate as an independent unit by itself, and
must be used in conjunction with a 5.1ch surround decoder. For information about Clarion
center units and DVD changers that can be connected to this component, see the sec-
tion SYSTEM EXPANSION on P17. Alternately, consult your retail dealer or Clarion
service center.
When connecting this component (control unit), be sure to set the 5.1ch surround decoder’s
[STAND-ALONE / SLAVE] switch to the [STAND-ALONE] position. Also be sure to con-
nect the power cable.
In order to demonstrate optimum audio performance, be sure to change the default set-
tings of the adjust mode’s [ ], [SP-SEL FILTER SP-GAIN DELAY], [ ] and [ ] functions (see
P9-13).
Using Analog Input Connections
When connecting the RCA 2ch output of another component (center unit, etc.) to the analog
INPUT connectors, the Dolby Pro Logic II function can be used to convert to 5.1ch output.
SLAVE STAND
ALONE
Set the [STAND-ALONE / SLAVE]
switch to the [STAND-ALONE] position.
Analog INPUT connectors
Center Unit
Audio OUTPUT connectors
NOTES:
When using the analog INPUT connectors, consult the section
Adjusting the RCA INPUT sensitivityon P13 and adjust the
sensitivity properly to prevent audio distortion.
Consult the section onSetting the Dolby digital functions
P11 and select the desired Dolby Pro Logic II mode.
280-7804-00_02-08(En) 2/22/02, 2:05 PM3


Produktspezifikationen

Marke: Clarion
Kategorie: Navigator
Modell: DVC920

Brauchst du Hilfe?

Wenn Sie Hilfe mit Clarion DVC920 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Navigator Clarion

Bedienungsanleitung Navigator

Neueste Bedienungsanleitung für -Kategorien-