Chief TPS2045 Bedienungsanleitung

Chief Flachbildschirmunterstützung TPS2045

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief TPS2045 (6 Seiten) in der Kategorie Flachbildschirmunterstützung. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

I N S T A L L A T I O N I N S T R U C T I O N S

CHIEF MANUFACTURING INC.

1-800-582-6480 952-894-6280 FAX 952-894-6918

8401 EAGLE CREEK PARKWAY, STE 700

SAVAGE, MINNESOTA 55378 USA

8807-000010 (Rev. B)

2005 Chief Manufacturing

www.chiefmfg.com

12/05

BEFORE YOU BEGIN

TRUSS/POLE STATIC MOUNT

Model: TPS-2000 SERIES

The TPS-2000 Series is designed for both pole and truss

installations quick and easy. This versatile mount

accommodates a large range of truss and pole

dimensions, includes security options and provides

flexible features perfect for exhibit, retail and digital

signage applications.

WARNING: ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL MEMBER CAPABLE

OF SUPPORTING 4 TIMES THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE EQUIPMENT BEING

MOUNTED. IF IT CANNOT SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.

WARNING: THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT IS 150 POUNDS (68.04 KG).

Model: TPS-2000 SERIES Installation Instructions

Parts

Unpack the carton, and verify contents shown in Figure 1

below. If you are missing any of the listed components,

please contact Customer Service at 1-800-582-6480.

Available Mounting Clamp Kits

If a clamp kit was not ordered at the time of mount

purchase, or an alternate clamp kit is required, choose

the appropriate kit from the table below and contact a

Chief Customer Service representative at

1-800-582-6480.

Table 1: Clamp Kits

KIT NUMBER INCLUDES

TPK-1 POLE KIT 2 clamps for 1-2" OD round or square poles

TPK-2 POLE KIT 2 clamps for 2-3" OD round or square poles

TPK-3 TRUSS KIT 4 clamps for 1" or smaller OD round or

square truss

TPK-4 TRUSS KIT 4 clamps for 1-2" OD round or square truss

TPK-5 TRUSS KIT 4 clamps for 2-3" OD round or square truss

Table 2: Parts

10 PLATE, Truss 1

20 PLATE ASSEMBLY, Face 1

30 NUT, Lock, Stover, 3/8" 2

40 WASHER, Flat, 3/8" 2

50 WASHER, UHMW 1

60 SPACER, Nylon 2

Figure 1: PARTS

10 20

40 3050 60

Installation Instructions Model: TPS-2000 SERIES

INSTALLATION

Pole Mount

WARNING: THE STRUCTURAL MEMBER MUST BE

CAPABLE OF SUPPORTING 4 TIMES THE

COMBINED WEIGHT OF ALL COMPONENTS PLUS

THE EQUIPMENT BEING MOUNTED.

1. Verify truss plate (10) is properly oriented for

installation.

Figure 2: Truss Plate Orientation for Pole Installation

2. Attach truss plate (10) to pole using Chief accessory

clamps or equivalent. (See Figure 3)

NOTE: Contact Chief Customer Service at 1-800-582-

6480 to identify the proper mounting clamp for the

installation.

3. Adjust truss plate (10) vertical and horizontal position

until desired location is obtained. (See Figure 4)

4. Secure truss plate to pole by tightening clamp

hardware. (See Figure 4)

Figure 3: Install Back Plate to Pole

Figure 4: Position and Secure Back Plate

Truss Mount

WARNING: THE STRUCTURAL MEMBER MUST BE

CAPABLE OF SUPPORTING 4 TIMES THE

COMBINED WEIGHT OF ALL COMPONENTS PLUS

THE EQUIPMENT BEING MOUNTED.

1. Verify truss plate (10) is properly oriented for

installation.

NOTE: The orientation of the truss plate when mounted

on a truss is the same as when mounted on a

pole. (See Figure 2)

2. Locate mount location on truss.

3. Attach truss plate (10) to truss using Chief accessory

clamps or equivalent. (See Figure 3)

NOTE: Refer to page 2 of this document for available

Chief mounting clamp kits. See Available

Mounting Clamp Kits on page -2

4. Adjust truss plate (10) vertical position until desired

location is obtained. (See Figure 4)

5. Secure truss plate to truss by tightening clamp

hardware. (see Figure 5)

Slot at bottom

Recessed, Slotted Flat Surface

Against Pole

Clamp

Tighten Clamp Hardware

(4 places)

Produktspezifikationen

Marke:	Chief
Kategorie:	Flachbildschirmunterstützung
Modell:	TPS2045
Breite:	411 mm
Tiefe:	21 mm
Produktfarbe:	Schwarz
Höhe:	424 mm
Befestigungstyp:	Wand
Höchstgewichtskapazität:	68.03 kg
Gehäusematerial:	Metall
Projektionsflächenkapazität:	63 "