Chauvet Rogue R1X Wash Bedienungsanleitung

Chauvet Beleuchtung Rogue R1X Wash

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chauvet Rogue R1X Wash (68 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/68
English EN
Español ES
Français FR
Deutsch DE
Nederlands NL
Quick Reference Guide
Model ID: ROGUER1XWASH
1
EN
QUICK REFERENCE GUIDE
Rogue R1X Wash QRG Rev. 6
About This Guide
The Rogue R1X Wash Quick Reference Guide (QRG) has basic product information such as connection, mounting,
menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the
period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this
warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This
warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to
country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 11.5 ft
(3.5 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord
exclusively available from the manufacturer or his service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualified person.
• The luminaire is intended for professional use only.
• DO NOT open this product. It contains no user-serviceable parts.
• DO NOT look at the light source when the product is on.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
• CAUTION: This product’s housing may be hot when lights are operating.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 8 in (20 cm) of this product while operating or connected to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect
it. (IP20)
• DO NOT operate this product if the housing, lenses, or cables appear damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket or the handles to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or
return a product. Refer to Contact Us at the end of this QRG for contact information.
What is Included
• Rogue R1X Wash
• Neutrik® powerCON® power cord
• Omega bracket with mounting hardware
• Quick Reference Guide
EN
2
Rogue R1X Wash QRG Rev. 6
QUICK REFERENCE GUIDE
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
It is possible to power link up to 7 Rogue R1X Wash products at 100 V, 9 products at 120 V, 16 products at
208 V, 18 products at 230 V, or up to 19 products at 240 V. Never exceed this number. Power-linking cables can be
purchased separately.
AC Plug
Replacing the Fuse
1. Disconnect the product from power.
2. Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Rogue R1X Wash will work with a DMX controller using a nnection. A DMX Primer is 3- or 5-pin DMX serial co
available from www.chauvetprofessional.com.
DMX Connection
The Rogue R1X Wash uses a 3- or 5-pin DMX data connection for its DMX personalities: 14CH, 15CH, 19CH, and 21CH.
See the User Manual for information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The Rogue R1X Wash supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from www.chauvetprofessional.com for more details.
Mounting
Before mounting this product, read the Safety Notes. Use at least one mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.
Mounting Diagram
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
When using only one mounting clamp, be sure to use a clamp with a captive bolt to prevent accidental
loosening.
!
Safety Cable
Mounting Clamp
Overhead Mounting Floor Mounting
!

Produktspezifikationen

Marke: Chauvet
Kategorie: Beleuchtung
Modell: Rogue R1X Wash

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chauvet Rogue R1X Wash benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Beleuchtung Chauvet

Chauvet

Chauvet Maverick MK3 Spot Bedienungsanleitung

22 Juni 2024
Chauvet

Chauvet Rogue R2X Spot Bedienungsanleitung

22 Juni 2024
Chauvet

Chauvet Rogue R1 BeamWash Bedienungsanleitung

22 Juni 2024
Chauvet

Chauvet Rogue R2X Wash VW Bedienungsanleitung

22 Juni 2024
Chauvet

Chauvet Maverick MK3 Profile Bedienungsanleitung

22 Juni 2024
Chauvet

Chauvet Rogue R3X Wash Bedienungsanleitung

21 Juni 2024
Chauvet

Chauvet Rogue R3 Beam Bedienungsanleitung

21 Juni 2024
Chauvet

Chauvet COLORdash Par-Quad 7 Bedienungsanleitung

19 Juni 2024
Chauvet

Chauvet Ovation Rêve P-3 IP Bedienungsanleitung

19 Juni 2024
Chauvet

Chauvet Ovation Rêve F-3 IP Bedienungsanleitung

19 Juni 2024

Bedienungsanleitung Beleuchtung

Neueste Bedienungsanleitung für -Kategorien-

Stairville

Stairville BEL4 Battery Event Light 4x15W Bedienungsanleitung

21 August 2024
Maul

Maul Avior Bedienungsanleitung

15 August 2024
Black Diamond

Black Diamond Spot R 400 Bedienungsanleitung

28 Juni 2024
Black Diamond

Black Diamond Storm 450 Bedienungsanleitung

28 Juni 2024
Black Diamond

Black Diamond Storm R 500 Bedienungsanleitung

28 Juni 2024
Black Diamond

Black Diamond Cosmo R 350 Bedienungsanleitung

28 Juni 2024
Black Diamond

Black Diamond Astro R 300 Bedienungsanleitung

28 Juni 2024
Black Diamond

Black Diamond Icon 700 Bedienungsanleitung

28 Juni 2024
Black Diamond

Black Diamond Spot 400 Bedienungsanleitung

28 Juni 2024
Louis Poulsen

Louis Poulsen Panthella 160 Bedienungsanleitung

27 Juni 2024