Chamberlain RJO20 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chamberlain RJO20 (40 Seiten) in der Kategorie Garagentoröffner. Dieser Bedienungsanleitung war für 80 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System
® and cable tension
monitor are connected and properly aligned.
Periodic checks of the garage door opener are required to ensure safe operation.
This garage door opener is ONLY compatible with myQ
® accessories.
The model number label is located behind the hinged door of your opener.
This product is intended for use on low headroom tracks with outside pickup NOT
drum or garage doors utilizing extension springs. For advanced or customized
adjustments, door springs, and/ or track congurations, contact a trained door
systems technician.
For Residential Use
Install On Sectional Doors With Torsion Assemblies Only
Wall Mount Garage Door Opener
Model RJO20
The Chamberlain Group, Inc.
300 Windsor Drive
Oak Brook, IL 60523
2
Preparation
When you see these Safety Symbols and Signal Words on the following pages,
they will alert you to the possibility of if you do not serious injury or death
comply with the warnings that accompany them. The hazard may come from
something mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the
possibility of damage to your garage door and/or the garage door opener if
you do not comply with the cautionary statements that accompany it. Read
them carefully.
Mechanical
Electrical
Safety Symbol and Signal Word Review
This garage door opener has been designed and tested to offer safe service provided it is installed, operated,
maintained, and tested in strict accordance with the instructions and warnings contained in this manual.
Table of Contents
PREPARATION 2
Safety Symbol and Signal Word
Review 2 .............................................
Glossary 3 ...........................................
Is Your Garage Door Ready? 4 ...........
Prepare Your Garage Door 5 ...............
Carton Inventory 6 ..............................
Hardware 6 .........................................
Overview of Installation 7 ....................
INSTALLATION 7
Important Installation Instructions 8 ...
Tools You Will Need 8 .........................
Attach the Collar to the
Garage Door Opener 9 ........................
Position and Mount the
Garage Door Opener 10 ......................
Attach the Emergency Release
Rope and Handle 12 ............................
Power Door Lock 12-13 ......................
Position the Cable Tension Monitor
(Required) 13 ......................................
Attach the Cable Tension Monitor
(Required) 14 ......................................
Install the Door Control
(myQ® Control Panel) 15 ....................
Install Remote Light 16 .......................
Install the Protector System
® 17 ........
Connect Power 20 ...............................
Align the Safety Reversing Sensors 21
ADJUSTMENT 22
Program the Travel Limits 22 ..............
Enter Force Adjustment Mode 23 ........
Test the Safety Reversal System 24 ....
Test the Protector System
® 24 ...........
Test the Power Door Lock 25 ..............
Test the Emergency Release 25 ..........
Test Cable Tension Monitor 25 ...........
OPERATION 26
Using Your Garage Door Opener 26 ....
Using the Door Control
(myQ® Control Panel) 27 ....................
Using the Remote Control 28 ..............
PROGRAMMING 29
To Add a Remote Control, Keypad, or
myQ
® Enabled Accessories 29 ............
Reprogramming Remote Light or
Additional Light 30 ..............................
HomeLink
® .....................................30
Chamberlain Internet Gateway 31 ......
To Erase All Codes From the
Door Control (myQ® Control Panel)
Memory 31 .........................................
MAINTENANCE 32
Care of Your Garage Door Opener 32 ..
TROUBLESHOOTING 33
Diagnostic Chart 33 ............................
Troubleshooting 34 .............................
SAFETY & MAINTENANCE
GUIDE 36-37
ACCESSORIES 38
WARRANTY 39
REPAIR PARTS 39
Installation Parts 39 ............................
Garage Door Opener
Assembly Parts 40 ..............................
CONTACT INFORMATION 40
UNATTENDED OPERATION
The Timer-to-Close (TTC) feature, the myQ
® Smartphone Control app and myQ® Garage Door are examples of
unattended close and are to be used ONLY with sectional doors. Any device or feature that allows the door to close
without being in the line of sight of the door is considered unattended close.
WARNING: This product can expose you to chemicals including lead, which are known to the State
of California to cause cancer or birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
3
Glossary
Here are some basic terms you may encounter as you prepare and install your garage door opener.
Preparation (continued)
Track
Track
Roller
Drum
Hinge
Torsion
springs
Torsion bar
Bearing
plate
Center bearing
plate
Electrical
outlet
Sectional door
Floor
Door seal -
bottom of door
Term Definition
Bearing Plate Acts as a support for the torsion bar. The bearing and mounting plate are typically located
above the garage door.
Cable Tension
Monitor
The cable tension monitor detects any slack in the garage door cables. Failure to properly
install the cable tension monitor may cause the cables to be thrown and may result in a
hazardous situation. (Not shown below)
Door Seal The door seal is located at the bottom of the door and helps to keep outdoor elements from
entering the garage.
Drum Drums are round, grooved spools on the torsion bar that keep door cables orderly.
Extension Springs NOTExtension springs are compatible with this opener. Extension springs are typically
mounted along the horizontal section of the track and extend from the front of the door
opening to the back hang. The springs are intended to make a door lighter so you can easily
open and close the door by hand.
High Lift
Sectional Door
A type of garage door constructed with multiple panels that slide along a track inside the
garage. The track runs vertically up the wall beyond the top of the door opening several
inches before encountering the curve in the track. The extended distance above the top of the
garage door determines the amount of a high lift.
Roller Small wheels which allow the door to move up and down the track.
Safety Reversing
Sensor
The safety reversing sensors are a set of sensor eyes that detect obstructions in the path of
the garage door. If an obstruction is found, the sensors tell the door to reverse direction.
(Not shown below)
Torsion Springs A torsion spring is a type of spring that counter balances the garage door. The torsion spring is
located above the door on the torsion bar. The springs are intended to make a door lighter so
you can easily open and close the door by hand. Consult a trained door systems technician if
you need the springs adjusted or replaced.
Torsion Bar A torsion bar is a horizontal metal bar mounted above the garage door. The torsion springs
are located on the torsion bar. Most torsion bars are hollow, while some are solid. Some
solid torsion bars may have a groove called a keyway that runs the length of the bar.


Produktspezifikationen

Marke: Chamberlain
Kategorie: Garagentoröffner
Modell: RJO20

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chamberlain RJO20 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Garagentoröffner Chamberlain

Bedienungsanleitung Garagentoröffner

Neueste Bedienungsanleitung für -Kategorien-