CDA KVF21L Bedienungsanleitung
CDA
Waschbecken
KVF21L
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CDA KVF21L (4 Seiten) in der Kategorie Waschbecken. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/cda/kvf21l/html/bg1.png)
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : F : E : 01949 862 012 01949 862 003 customer.care@cda.eu www.cda.euW : www.cda.eu
kvf21 & kvf22
Stainless Steel
Flush Mount Sinks
Installation
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/cda/kvf21l/html/bg2.png)
2
Installation
Before Installation
Thoroughly check the sink and any fittings for signs of transport (or
other) damage. Please note: After fitting, sinks cannot be returned for
credit or replacement.
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowls are compatible with the cabinets
themselves.
Confirm that with the sink in position:
• There is adequate space to install any taps or other required
accessories.
• There is adequate space to install the waste pipework and that any
necessary modification to internal shelves to accommodate the waste
(and trap) is acceptable.
• Access to any water stop-cock or other services will still be adequate
after the installation.
Installation
• Refer to the cut-out sizes on the back of this manual and use them
to mark out where the worktop needs to be cut. Double-check the
dimensions before cutting the worktop aperture.
• After cutting out the worktop aperture, we recommend you seal the
cut edges with silicone (or similar) sealant to help prevent ingress of
water.
• It is often easier to mount the taps, waste-fitting and overflow onto the
sink prior to fitting the sink to the worktop.
• The edges of the sink should be bedded onto a bead of silicone
(or similar) sealant, to create a barrier to the ingress of water and
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/cda/kvf21l/html/bg3.png)
3
E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the
right to change specifications without prior notice.
other items between sink and
worktop.
• After positioning the sink on the
worktop, position the fixing brackets
as shown in Fig. 1, then tighten their
screws.
• Do not use a power tool to tighten
the screws; by using a hand tool
it is easier to ensure that they are
tightened just enough to clamp
down on the worktop and no more.
• After fixing, ensure the sealant forms a continuous bead to prevent
water ingress.
• Remove any excess sealant using an appropriate method as
recommended by the sealant manufacturer.
• The taps, waste-fitting and overflow can now be mounted onto the
sink (if not already done) and fully connected to their respective
services.
• To check the waste for leaks, close the plug/basket of the waste
fitting, open the tap and fill the sink to the level of the overflow; turn
o the tap and wait several minutes to verify that the water doesn’t
drain away.
• Empty the sink.
After fitting, ensure that the enclosed “Stainless Steel Sinks Use and
Maintenance” guide is retained for the customer and/or user of the
sink.
Fig. 1
Produktspezifikationen
Marke: | CDA |
Kategorie: | Waschbecken |
Modell: | KVF21L |
Brauchst du Hilfe?
Wenn Sie Hilfe mit CDA KVF21L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Waschbecken CDA
![CDA](/images/pdf_free.png)
15 Oktober 2024
![CDA](/images/pdf_free.png)
11 Oktober 2024
![CDA](/images/pdf_free.png)
20 August 2024
![CDA](/images/pdf_free.png)
19 August 2024
![CDA](/images/pdf_free.png)
16 August 2024
![CDA](/images/pdf_free.png)
15 August 2024
![CDA](/images/pdf_free.png)
14 August 2024
![CDA](/images/pdf_free.png)
14 August 2024
![CDA](/images/pdf_free.png)
14 August 2024
![CDA](/images/pdf_free.png)
14 August 2024
Bedienungsanleitung Waschbecken
- Waschbecken Concept
- Waschbecken Teka
- Waschbecken IKEA
- Waschbecken Smeg
- Waschbecken Hotpoint-Ariston
- Waschbecken Bartscher
- Waschbecken Lynx
- Waschbecken Caple
- Waschbecken Kernau
- Waschbecken Franke
- Waschbecken Foster
- Waschbecken Cata
- Waschbecken Leisure
- Waschbecken Nodor
- Waschbecken Miomare
- Waschbecken Gustavsberg
- Waschbecken Schock
- Waschbecken Rangemaster
- Waschbecken BLANCO
- Waschbecken Elkay
- Waschbecken Deante
- Waschbecken ZLine
- Waschbecken Sani-Lav
- Waschbecken Roca
- Waschbecken Artusi
- Waschbecken Advance Tabco
- Waschbecken ARC
- Waschbecken Rohl
- Waschbecken Differnz
- Waschbecken Coyote
- Waschbecken Tot Mate
- Waschbecken Kuchinox
- Waschbecken Oliveri
- Waschbecken Enza
- Waschbecken Laveo
- Waschbecken Shaws
- Waschbecken Dxv
- Waschbecken Vigo
- Waschbecken Signature Hardware
Neueste Bedienungsanleitung für -Kategorien-
![Smeg](/images/logos/smeg.png)
15 Oktober 2024
![BLANCO](/images/pdf_free.png)
15 Oktober 2024
![Teka](/images/logos/teka.png)
13 Oktober 2024
![Teka](/images/logos/teka.png)
13 Oktober 2024
![Teka](/images/logos/teka.png)
13 Oktober 2024
![Teka](/images/logos/teka.png)
13 Oktober 2024
![Smeg](/images/logos/smeg.png)
12 Oktober 2024
![Smeg](/images/logos/smeg.png)
11 Oktober 2024
![Smeg](/images/logos/smeg.png)
7 Oktober 2024
![Smeg](/images/logos/smeg.png)
7 Oktober 2024