CDA KVC35RSS Bedienungsanleitung
CDA
Waschbecken
KVC35RSS
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CDA KVC35RSS (3 Seiten) in der Kategorie Waschbecken. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
www.cda.eu
KVC30 and
KVC35 Stainless
Steel Undermount
Sinks
Installation
2
Installation
Before Installation
Thoroughly check the sink and any fittings for signs of damage
(transport or otherwise).
Please note: After fitting, sinks cannot be returned for credit or
replacement.
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowls are compatible with the cabinets
themselves.
Confirm that with the sink in position:
• There is adequate space to install any taps or other required
accessories.
• There is adequate space to install the waste pipe work and that any
necessary modifications to internal shelves to accommodate the
waste (and trap) are acceptable.
• Access to any water shut-o or other services will still be adequate
after the installation.
Installation
• Use the template provided to mark out where the worktop needs to
be cut. Double-check the dimensions, and check the template against
the sink, before cutting the worktop aperture.
• After cutting out the worktop aperture, we recommend you seal the
cut edges with silicone (or similar) sealant to help prevent ingress of
water.
• It is often easier to mount the taps to the worktop and the waste-fitting
and overflow onto the sink prior to fitting the sink to the worktop.
• The edges of the sink should be bedded onto a bead of silicone (or
similar) sealant, to create a barrier to the ingress of water and other
3
E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the
right to change specifications without prior notice.
items between sink and
worktop.
• After positioning the sink with the
worktop, fit the threaded inserts
into the underside of the worktop (a
10mm drill bit can be used to make
the holes for the threaded inserts)
and then position the brackets and
fixing screws as shown in Fig. 1. Next,
tighten the screws.
• Do not use a power tool to tighten the screws; use a hand tool
to ensure that they are tightened just enough to clamp down on
the worktop and no more.
• After fixing, ensure the sealant forms a continuous bead to prevent
water ingress.
• Remove any excess sealant using an appropriate method as
recommended by the sealant manufacturer.
• The taps, waste-fitting and overflow can now be mounted onto the
sink (if not already done) and fully connected to their respective
services.
• To check the waste for leaks, close the plug/basket of the waste
fitting, open the tap and fill the sink to the level of the overflow; turn
o the tap and wait several minutes to verify that the water doesn’t
drain away. Finally, empty the sink.
After fitting, ensure that the enclosed “Stainless Steel Sinks Use and
Maintenance” guide is retained for the customer and/or user of the
sink.
Fig. 1
Worktop
Sink
Threaded insert
Fixing screw
Bracket
Produktspezifikationen
| Marke: | CDA |
| Kategorie: | Waschbecken |
| Modell: | KVC35RSS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit CDA KVC35RSS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Waschbecken CDA
15 Oktober 2024
11 Oktober 2024
20 August 2024
19 August 2024
16 August 2024
15 August 2024
14 August 2024
14 August 2024
14 August 2024
14 August 2024
Bedienungsanleitung Waschbecken
- Waschbecken Concept
- Waschbecken Teka
- Waschbecken IKEA
- Waschbecken Smeg
- Waschbecken Hotpoint-Ariston
- Waschbecken Bartscher
- Waschbecken Lynx
- Waschbecken Caple
- Waschbecken Kernau
- Waschbecken Franke
- Waschbecken Foster
- Waschbecken Cata
- Waschbecken Leisure
- Waschbecken Nodor
- Waschbecken Miomare
- Waschbecken Gustavsberg
- Waschbecken Schock
- Waschbecken Rangemaster
- Waschbecken BLANCO
- Waschbecken Elkay
- Waschbecken Deante
- Waschbecken ZLine
- Waschbecken Sani-Lav
- Waschbecken Roca
- Waschbecken Artusi
- Waschbecken Advance Tabco
- Waschbecken ARC
- Waschbecken Rohl
- Waschbecken Differnz
- Waschbecken Coyote
- Waschbecken Tot Mate
- Waschbecken Kuchinox
- Waschbecken Oliveri
- Waschbecken Enza
- Waschbecken Laveo
- Waschbecken Shaws
- Waschbecken Dxv
- Waschbecken Vigo
- Waschbecken Signature Hardware
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
15 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
11 Oktober 2024
7 Oktober 2024
7 Oktober 2024