CDA KA50 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CDA KA50 (4 Seiten) in der Kategorie Waschbecken. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : F : E : 01949 862 012 01949 862 003 customer.care@cda.eu www.cda.euW : www.cda.eu
Stainless Steel
Sinks
Installation
2
Installation
Before installation
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowls are compatible with the cabinets
themselves.
Confirm that with the sink in position:
 There is adequate space to install any taps or other required
accessories.
 There is adequate space to install the waste pipework and that any
necessary modification to internal shelves to accommodate the waste
(and trap) is acceptable.
 Access to any water stop-cock or other services will still be adequate
after the installation.
Installation
 Use the template included with the sink to mark out where the
worktop needs to be cut.
 After cutting out the worktop aperture, we recommend you seal the
cut edges with silicone (or similar) sealant to help prevent ingress of
water.
 Position the supplied gasket around the perimeter of the hole (Fig. 1).
 It is often easier to mount the taps,
waste-fitting and overflow onto the sink
prior to fitting the sink to the worktop.
Ensure that the external edge of the
sink is positioned on the gasket, to
create a barrier to the ingress of water
and other items between sink and
worktop.
Fig. 1
3
E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the
right to change specifications without prior notice.
 After positioning the sink on the
worktop, position the fixing brackets
as shown in Fig. 2, then tighten their
screws.
 Do not use a power tool to tighten
the screws; by using a hand tool
it is easier to ensure that they are
tightened just enough to clamp
down on the worktop and no more.
 After fixing, remove any excess gasket material with a suitable
cutter.
 We recommend a thin bead of silicone sealer is applied around the
perimeter as added protection against water ingress.
 The taps, waste-fitting and overflow can now be mounted onto the
sink (if not already done) and fully connected to their respective
services.
 To check the waste for leaks, close the plug/basket of the waste
fitting, open the tap and fill the sink to the level of the overflow; turn
o the tap and wait several minutes to verify that the water doesn’t
drain away.
 Empty the sink.
After fitting, ensure that the enclosed “Stainless Steel Sinks Use and
Maintenance” guide is retained for the customer and/or user of the
sink.
Fig. 2


Produktspezifikationen

Marke: CDA
Kategorie: Waschbecken
Modell: KA50

Brauchst du Hilfe?

Wenn Sie Hilfe mit CDA KA50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Waschbecken CDA

Bedienungsanleitung Waschbecken

Neueste Bedienungsanleitung für -Kategorien-