Casio IT-800 Bedienungsanleitung

Casio Kasten IT-800

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio IT-800 (73 Seiten) in der Kategorie Kasten. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/73

Handheld Terminal

User’s Guide

Series

Be sure to read “Safety

Precautions” inside this

guide before trying to use

your Handheld Terminal.

E-1

Contents

Safety Precautions ........................................................................................E-3

Operating Precautions ..................................................................................E-8

Important ........................................................................................................E-8

After Service ........................................................................................................E-8

Regulatory Information .................................................................................E-9

Checking in the Box ....................................................................................E-13

Handheld Terminal System Conﬁ guration ................................................E-14

General Guide ...............................................................................................E-16

Loading and Removing the Battery Pack ..................................................E-19

Loading ..............................................................................................................E-20

Removing ........................................................................................................... E-21

Charging the Battery Pack .........................................................................E-22

USB Cradle/Ethernet Cradle/Cradle-type Battery Charger ...............................E-22

Car Mounted-type Battery Charger ....................................................................E-22

Dual Battery Charger .........................................................................................E-23

AC Adaptor ........................................................................................................E-23

Handling the Hand Belt ...............................................................................E-24

To remove the hand belt .....................................................................................E-24

To attach the hand belt ......................................................................................E-24

Connecting the Stylus String .......................................................................E-25

Attaching the Neck Strap ............................................................................E-26

To attach the neck strap ...................................................................................... E-26

Conﬁ guring Handheld Terminal Settings ..................................................E-27

Calibrating Touch Screen Alignment ................................................................. E-27

Adjusting Display Brightness ............................................................................E-28

Display Auto Dimmer ........................................................................................E-28

Using the Laser Scanner (Laser Models) ..................................................E-29

Using the C-MOS Imager (Imager Models) ................................................E-30

Adjusting the Laser Light Emission Width ................................................E-31

Handling the NFC ........................................................................................E-33

Performing Communications .....................................................................E-34

IR Communication ............................................................................................. E-34

Bluetooth® Communication ............................................................................... E-35

GSM/W-CDMA Communication ......................................................................E-36

GPS .................................................................................................................... E-36

E-2

Handling microSD Cards ............................................................................E-37

Installing.............................................................................................................E-37

Removing ........................................................................................................... E-38

Handling SIM Cards .....................................................................................E-39

Installing.............................................................................................................E-39

Removing ........................................................................................................... E-40

Handling SD Memory Cards .......................................................................E-41

Installing.............................................................................................................E-41

Removing ........................................................................................................... E-41

Resetting the Handheld Terminal ...............................................................E-42

Performing a Full Reset (Initialization) .............................................................E-42

Warning Label ..............................................................................................E-44

IT-800 Speciﬁ cations ...................................................................................E-45

Using the USB Cradle (HA-H60IO) ..............................................................E-49

General Guide ........................................................................................................49

Connecting the USB Cradle Power Supply ...........................................................51

Speciﬁ cations .........................................................................................................54

Using the Ethernet Cradle (HA-H62IO) .......................................................E-55

General Guide ........................................................................................................55

Connecting the Ethernet Cradle Power Supply ......................................................57

Speciﬁ cations .........................................................................................................59

Using the Cradle-type Battery Charger (HA-H30CHG) .............................E-60

General Guide ........................................................................................................60

Connecting the Cradle-type Battery Charger Power Supply .................................61

Speciﬁ cations .........................................................................................................62

Using the Car Mounted-type Battery Charger (HA-H35CHG) ..................E-63

General Guide ........................................................................................................63

Speciﬁ cations .........................................................................................................64

Using the Dual Battery Charger (HA-D32DCHG) .......................................E-65

General Guide ........................................................................................................65

Charging a Battery Pack.........................................................................................67

Connecting Multiple Dual Battery Chargers..........................................................68

Speciﬁ cations .........................................................................................................69

Using the AC Adaptor (AD-S15050B) ..........................................................E-70

Using Rechargeable Battery Packs ............................................................E-71

Battery Pack Speciﬁ cations ....................................................................................71

Large-capacity Battery Pack Speciﬁ cations ...........................................................71

E-3

Safety Precautions

Congratulations upon your selection of this CASIO product. Be sure to read the

following Safety Precautions before trying to use it for the ﬁ rst time.

Your neglect or avoidance of the warning and caution statements in the

subsequent pages causes the danger of ﬁ re, electric shock, malfunction and

damage on the goods as well as personal injury.

Markings and Symbols

The following are the meanings of the markings and symbols used in these Safety

Precautions.

Danger This symbol indicates information that, if ignored or applied

incorrectly, creates the danger of death or serious personal injury.

Warning

This symbol indicates information that, if ignored or applied

incorrectly, creates the possibility of death or serious personal

injury.

Caution

This symbol indicates information that, if ignored or applied

incorrectly, creates the possibility of personal injury or property

damage.

A diagonal line indicates something you should not do. The symbol shown

here indicates you should not try to take the unit apart.

A black circle indicates something you should do. The symbol shown here

indicates you should unplug the unit from the wall outlet.

Warning

Disassembly and Modiﬁ cation

Never try to disassemble or modify the Handheld Terminal and its options

including battery pack and battery in any way.

Abnormal Conditions

Should the Handheld Terminal and/or its options including battery pack and

battery become hot or start to emit smoke or a strange odor, immediately turn

off the power and contact your dealer or distributor whom you purchased the

product from, or an authorized CASIO service provider.

•

E-4

Warning

Dust and Moisture

Though the Handheld Terminal is dust and water splash resistant, its options

including the battery pack are not. Keep loose metal objects and containers

ﬁ lled with liquid away from your Handheld Terminal and the options. Also,

never handle the Handheld Terminal and the options while your hands are

wet.

Laser Light

The laser scanner models (model dependant) with the integrated laser

scanning module scan bar codes using laser light. Never look directly into

the laser light or shine the laser light into the eyes.

•

Warning

Interference with the Operation of Other Equipment

(Using Wireless Data Communication)

Keep your Handheld Terminal at least 22 centimeters (8

11/16") away from

anyone wearing a pacemaker. Radio waves emitted by the Handheld

Terminal can affect the operation of a pacemaker.

Before the use in aircraft, be sure to consult with cabin crew for interference

the Handheld Terminal emits.

Before the use in medical facility, be sure to consult with the facility

management or the manufacture of a speciﬁ c medical equipment that the

Handheld Terminal may interfere with.

Do not use the Handheld Terminal nearby gas pump or chemical tank or any

other places ﬂ ammable or explosive.

To comply with the relevant European RF exposure compliance

requirements, a separation distance of at least 3.8cm in wireless operation

must be maintained between the terminal and all persons around. This

terminal must not be co-located or operating in conjunction with other

transmitter.

•

E-5

Caution

Foreign Objects

Take care to ensure that metals or combustible objects are not inserted into

the openings of the Handheld Terminal or its options, and not to allow

moisture to get inside of them.

Location

Install the cradle properly on a ﬂ at and stable surface so that it cannot fall

down onto ﬂ oor.

LCD Screen

Never apply strong pressure to the screen or subject it to strong impact.

Doing so can crack the LCD Screen.

•

Warning

Avoiding Trafﬁ c Accidents

Never use your Car Mounted-type Battery Charger while operating a motor

vehicle. Park your vehicle in a safe place before performing any operation.

Never locate the Car Mounted-type Battery Charger where it might interfere

with proper operation of the vehicle.

Locate connecting cables as instructed by the manual, avoiding locations

that can interfere with driving operations.

Car Battery Power

Should the Car Power Cable become damaged, replace it immediately with

a new Car Power Cable when using the Car Mounted-type Battery Charger.

•

Caution

Installing in Vehicle

To save your vehicle’s battery from running down, be sure that the Car

Power Cable should be unplugged from the cigarette lighter socket when

you do not use the Car Mounted-type Battery Charger and that the use of

the battery charger should be avoid while the vehicle’s engine is turned off.

Do not handle the Car Power Cable with wet hands.

Install the Car Mounted-type Battery Charger at location in a vehicle where

strong vibration, unstable, excessive of humidity and dust, and under direct

sunlight can be avoid. Also, avoid the area where the air bag inﬂ ates or any

other area where your safe driving is blocked.

Do not leave the Handheld Terminal in vehicle for a long period of time.

•

E-6

Optional Lithium-ion Battery Pack

Danger

Never use the Handheld Terminal and its option including the battery pack

and battery next to open ﬂ ame, near a stove, or any other area exposed to

high heat, or leave them for a long period of time in a vehicle parked in

direct sunlight.

Never use the battery pack with any device other than the Handheld

Terminal.

Never dispose of the battery pack by incinerating it or otherwise expose it

to heat.

Never transport or store the battery pack together with metal objects that

may result in shorting positive (+) and negative (–) terminals of the battery

pack. Be sure to place the battery pack in its case whenever transporting or

storing it.

Never throw the battery pack or otherwise subject it to strong impact.

Never pierce the battery pack with nails, hit it with a hammer, or step on it.

Use only the speciﬁ ed battery charger to charge the battery pack.

•

Warning

Never place the battery pack in a microwave oven or any other high-voltage

device.

If the amount of time period the battery pack can serve becomes

considerably short even after it has been fully charged for the speciﬁ ed time

period, stop using it.

Should the battery pack start to leak or emit a strange odor, immediately

move it away from any ﬂ ame nearby. Leaking battery ﬂ uid is combustible.

Should ﬂ uid from the battery pack accidentally get into your eyes or on the

skin, do not rub it. Immediately rinse it off with clean tap water and then

consult a physician.

•

Caution

Replace only with the same type of battery pack recommended by CASIO.

Dispose of used battery packs according to the local regulation.

Keep the battery pack out of the reach of small children.

•

E-7

Power Supply / AC Adaptor

Warning

Do not use the Handheld Terminal at a voltage other than the speciﬁ ed

voltage. Also, do not connect the Handheld Terminal to a multi-plug power

strip.

Never modify, sharply bend, twist, or pull on the power cord.

Never use a detergent to clean AC adaptor and its power cable, especially

on the plug and the jack.

When using the battery chargers and the cradles, be sure to use the

respective AC adaptors.

•

Caution

Never pull on the power cord when unplugging it. Always hold the plug

when unplugging it from the wall outlet.

Never touch the plug while your hands are wet.

Be sure to unplug the power cord from the wall outlet before cleaning the

battery chargers and the cradles.

Unplug the power cord from the wall outlet whenever leaving the battery

chargers and the cradles unattended for a long period.

The housing of the AC adaptor can become warm during normal use.

At least once a year, unplug the AC adaptor from the wall outlet and clean

any dust that builds up between the prongs of the plug.

Dust built up between the prongs can lead to the danger of ﬁ re.

•

Backup of All Important Data

Caution

Note that CASIO Computer Co., Ltd. shall not be held liable to you or any

third party for any damages or loss caused by deletion or corruption of data

due to use of the Handheld Terminal, malfunction or repair of the Handheld

Terminal or its peripherals, or due to the batteries going dead.

The Handheld Terminal employs electronic memory to store data, which

means that memory contents can be corrupted or deleted if power is

interrupted due to the batteries going dead or incorrect battery replacement

procedures. Data cannot be recovered once it is lost or corrupted. Be sure

to make backup of all important data. One way to do this is to use the

separately sold cradles to transfer data to a computer.

•

E-8

Operating Precautions

Your Handheld Terminal and its options are precision. Improper operation or rough

handling can cause problems with data storage and other problems. Note and observe

the following precautions to ensure proper operation.

Do not leave dead battery pack in the Handheld Terminal for a long period.

Dead battery pack can leak, leading to malfunction and damage to the Handheld

Terminal.

Stop or avoid using the Handheld Terminal and its options in areas and

conditions subject to the following.

— Large amounts of static electricity

— Extreme heat or cold or humidity

— Sudden temperature change

— Large amount of dust

— After large amount of rain or water falls on the Handheld Terminal

— Pressing the screen or keys with excessive force when using in the rain

Dead Pixels

The LCD panel employed in this product uses high precision and substantial number

of components which commonly cause a small number of the pixels not to light or

to remain lit all the time. This is due to the characteristics of LCD panel yield in

accuracy over 99.99% and permissible.

802.11a Restrictions (IT-800A-35):

— This product is for indoor use only when using channels 36, 40, 44, 48, 52, 56, 60,

or 64 (5150-5350 MHz).

— To ensure compliance with local regulations, be sure to select the country in which

the access point is installed.

Important

This guide does not include any information about programming and download

procedures. See the applicable separate documentation for information about the

procedures.

After Service

Should this product ever malfunction, contact your original retailer providing

information about the product name, the date you purchased it, and details about the

problem.

This mark applies to EU countries and Turkey only.

•

E-9

Regulatory Information

The USA and Canada

The CASIO IT-800 models are designed, tested and found to meet the relevant regulatory

standards described below.

USA

IT-800E

FCC Part 15 Subpart B

FCC Part 15 Subpart C

SAR ET DOCKET 93-62 and OET BULLETIN

CFR 21 Subpart 1000 (FDA)

UL 60950-1

HA-H60IO/HA-H62IO/HA-H30CHG

FCC Part 15 Subpart B

UL 60950-1

Canada

IT-800E

RSS-GEN

RSS-210

RSS-102

RSS-310

ICES-003

cUL 60950-1

HA-H60IO/HA-H62IO/HA-H30CHG

ICES-003

cUL 60950-1

E-10

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not

applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modiﬁ cations not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC

emission limits.

Caution Exposure to radio frequency radiation (below is for portable device)

To comply with FCC RF exposure compliance requirements, this device must not be co-located or

operating in conjunction with any other antenna or transmitter.

•

Declaration of Conformity

Model Number: HA-H60IO, HA-H62IO

Trade Name: CASIO

Responsible party: Industrial Handheld Division

Casio America, Inc.

Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801, USA

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

For Users in Canada

These Class B digital apparatuses comply with Canadian ICES-003.

Cet appareil numériqué de la classes B est conformé à la norme NMB-003 du Canada.

These devices comply with RSS 210 of Industry Canada (IC).

Operation is subject to the following two conditions:

(1) These devices may not cause interference, and

(2) These devices must accept any interference, including interference that may cause undesired opera-

tion of this device.

E-11

L’ utilisation de ce dispositif est autorisée seulement aux conditions suivantes :

(1) il ne doit pas produire de brouillage et

(2) I’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce

brouillage est susceptible de compromettre le fonctionnement du dispositif.

Exposure to radio frequency radiation

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does

not emit RF ﬁ eld in excess of Health Canada limits for the general population;

consult Safety Code 6, obtainable from Health Canada's website at

http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/99ehd-dhm237/index_e.html

Europe

Products are for distribution within

all member states of the EU.

France limited to 2446.5-2483.5 MHz Indoor use.

Belgium limited to 2400-2483.5 MHz Indoor, 2460-2483.5 MHz Outdoor use.

0984

Optional models HA-H60IO, HA-H62IO, HA-H30CHG, HA-H35CHG, HA-D32DCHG, HA-

D20BAT and HA-D21LBAT are in conformity with the Council Directive 2004/108/EC.

Manufacturer:

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Representative within the European Union:

CASIO EUROPE GmbH

Casio-Platz 1, 22848 Norderstedt, Germany

E-12

DECLARATION OF CONFORMITY

We, the under signed, CASIO Europe GmbH, hereby declare that the following types of the

product:

Product: Handheld Terminal

Type: IT-800R, IT-800RG

Brand: CASIO

are in conformity with all the provisions of the EC directive bellow meeting with the

relevant standards:

Council Directive: 1999/5/EC (R&TTE Directive):

Standards applied to all the types:

EN 300 328 v1.7.1 (2006-10) EN 60950-1: 2006

EN 300 330-2 v1.3.1 (2006-04) EN 50364: 2001

EN 301 489-3 v1.4.1 EN 62311: 2008

EN 301 489-17 v2.1.1

Standards applied to IT-800RG only:

EN 301 511 v9.0.2 EN 301 489-1 v1.8.1

EN 301 908-1 v3.2.1 EN 301 489-7 v1.3.1

EN 301 908-2 v3.2.1 EN 301 489-24 v1.4.1

EN 50360: 2001

These types of the product are fully compliant with all the essential requirements of the

directive and the standards that are assessed by the following Notiﬁ ed Body.

Compliance Certiﬁ cation Services (NB Number; 0984).

Manufacturer:

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Representative within the European Union:

CASIO Europe GmbH

Casio-Platz 1, 22848 Norderstedt, Germany

E-13

Checking in the Box

Please check the contents of the box before using the Handheld Terminal for the ﬁ rst

time.

Open the box and make sure that all the items shown here are included.

The stylus string can be

attached to the stylus

and hand belt.

User's Guide (this manual)

Handheld Terminal Neck Strap

Large-capacity Battery

Pack Cover

Stylus

The stylus can be attached

to the hand belt.

The hand belt

is attached on

the back of the

terminal. Set the

hand belt in proper

length by adjusting

the hook-loop

fastener prior to

using the terminal.

E-14

Handheld Terminal System Conﬁ guration

Options

IT-800 SeriesIT-800 Series

USB Cradle

HA-H60IO

Car Mounted-type Battery Charger

HA-H35CHG

Ethernet Cradle

HA-H62IO

Cradle-type Battery Charger

HA-H30CHG

The illustration shows the

USB Cradle (HA-H60IO).

The car power cable accompanies

to HA-H35CHG.

IT-800EC-05

IT-800EC-35

These models are

available in the

USA and Canada

only.

IT-800EC-05

IT-800EC-35

These models are

available in the

USA and Canada

only.

For the latest options list, refer to the ON-LINE manual available at

http://world.casio.com/system/pa/UsersGuide/sup85_e.html

E-15

HA-D21LBAT/HA-D21LBAT-A

(Large-capacity Battery Pack)

Power Cord for Europe AC-CORD-EU

Power Cord for North America AC-CORD-US

Power Cord for Taiwan AC-CORD-TW

Power Cord for Korea AC-CORD-KR

Power Cord for Australia AC-CORD-AU

HA-D20BAT/HA-D20BAT-A

(Battery Pack)

Dual Battery Charger Battery Pack

AC Adaptor for USB Cradle/

Ethernet Cradle/

Dual Battery Charger

AD-S42120C-N5

AD-S42120B-N**

Options

Cable DT-380USB

HA-D32DCHG

Screen Protect Sheet

HA-C90PS5B

AC Adaptor for IT-800/

Cradle-type Battery Charger

AD-S15050B-N

For WWAN models*, be sure to use either HA-D20BAT-A or

HA-D21LBAT-A battery pack.

* WWAN models:

IT-800RGC-05/RGC-15/RGC-35

** The AD-S42120B-N is not sold in the EU or in EFTA member states.

E-16

General Guide

Back Bottom

33 34

Left Right

Front

1 2 3 4

7 7

IT-800RGC-05

IT-800R-05

IT-800EC-05

IT-800RGC-15

IT-800R-15

IT-800RC-15

Top

IT-800R-35

IT-800A-35

IT-800EC-35

IT-800RC-35

IT-800RGC-35

E-17

1 Receiver Outputs voice sound.

2 Indicator 1 Orange: Charging

Green: Charging complete

Red: Battery pack error or the surrounding temperature is out of

the charging temperature range.

3 Indicator 2 Flashes blue when operating via Bluetooth or orange when

operating via W-LAN, GPS or W-WAN. Lights red when there

is a bar code scanning error and lights green when a bar code

scans successfully.

Lights red when the alarm function is activated.

4 Power Key Turns the power on and off.

5 Screen* The screen displays texts, operations, indicators and so forth. In

addition, operations can be performed and data can be input on

the screen using stylus. During the NFC operation, apply a card

close to the screen so that the card can be accessed.

6 Center Trigger Key Used to perform bar code reading. Can be assigned an arbitrary

function.

Center Key

(for IT-800R-05/EC-05/

RGC-05)

7 Function Keys Used when starting a pre-registered application.

8 Enter Key Press when ﬁ nishing entering numerical values or when moving

to the next step.

9 Mode Key The key switches the character input mode, either characters in

lowercase letter or characters in uppercase letter.

10 Fn Key Used to make various settings in combination with the function

keys or numeric keys or when starting a pre-registered

application.

11 CLR Key Used to clear one letter to the left of the cursor.

12 Numeric Keys Used to enter numeric values and decimal points.

13 Cursor Key Perform the same functions as the up and down arrow keys on a

PC keyboard.

14 Microphone Used for audio input (including voice).

15 Speaker Generates audio and buzzer tones.

16 R Trigger Key Used to perform bar code reading.

R Enter Key

(for IT-800R-05/EC-05/

RGC-05)

17 L Trigger Key Used to perform bar code reading.

Up/Down Key

(for IT-800R-05/EC-05/

RGC-05)

E-18

18 DC Jack The dedicated optional AC adaptor is connected to this jack.

Barcode Reader

Laser light or LED light is emitted from this window that reads

bar codes.

SD Card Slot

(for IT-800R-05/EC-05/

RGC-05)

SD card slot.

20 IR Port Used for communication with another Handheld Terminal.

21 Power/Signal

Terminals

Used to receive power provided by the USB Cradle or Ethernet

Cradle. Also used for data communication.

22 Strap Holes Used to attach neck strap and hand belt.

23 Camera Lens

(Camera models)

Takes photos.

24 LED

(Camera models)

Used for taking photos.

25 Car Mounted-type

Battery Charger

Mount Holes

These holes hold the terminal seating in the optional car

mounted-type battery charger.

26 Reset Switch Used to reset the Handheld Terminal.

microSD Card Slot

(for IT-800R-15/RC-15/

RGC-15/R-35/A-35/

RC-35/RGC-35/EC-05)

microSD card slot. (Remove the battery pack to load a card.)

28 Battery Pack Cover Used to cover the battery compartment that holds the battery

pack inside.

Cradle Mount Holes

These holes hold the terminal seating in the optional cradle or

in the cradle-type battery charger.

30 SIM Card Slot

(for IT-800RGC-05/

RGC-15/RGC-35)

SIM card slot. Remove the battery pack to load and unlaod SIM

card.

31 Battery Pack Cover

Lock Switches

Used to lock the battery cover and to release.

32 Extension Port Provided for future extension.

33 Stylus It is used to operate the terminal or to input data.

34 Hand Belt It is used to hold the terminal or to carry it.

* Antenna of the NFC is laid underneath of the screen frame for communication with card.

E-19

Loading and Removing the Battery Pack

Your Handheld Terminal uses two types of battery: a battery pack and a memory

backup battery.

The battery pack is used to power normal operations and to store data, while the

memory backup battery provides the power required to maintain memory contents

when the battery pack power is unable to supply power for some reason.

You can choose either battery pack (HA-D20BAT, HA-D20BAT-A) or large-capacity

battery pack (HA-D21LBAT, HA-D21LBAT-A) for operating power.

For WWAN models, be sure to use either HA-D20BAT-A or HA-D21LBAT-A battery pack.

The backup battery is installed inside of the Handheld Terminal.

This guide uses the following terms to refer to the batteries.

Battery Pack:

Rechargeable battery pack (HA-D20BAT, HA-D20BAT-A, HA-D21LBAT

or HA-D21LBAT-A) for normal operations and data storage

Backup Battery: Built-in battery for memory backup

When the battery pack power goes low, immediately charge it or replace it with a

charged battery pack.

You can use the Dual Battery Charger, the Cradle-type Battery Charger, the USB Cradle,

the Ethernet Cradle, the Car Mounted-type Battery Charger, or the AC adaptor to charge

a battery pack installed in the terminal. See the relevant sections in this guide for the

respective options about how to use.

Important!

Always keep backup of all important data!

The battery pack powers normal operation and also provides power required to

maintain memory contents, while the backup battery provides backup power to

maintain memory contents. Because of this, you should not remove the battery

pack if the backup battery is dead. Removing the battery pack while the backup

battery is dead causes data in the memory to be corrupted or lost. Note that

once data is lost it cannot be recovered. Always keep backup of all important

data.

The charge of a battery pack when you purchase it may be depleted due to

testing at the factory or natural discharge during shipment and storage. Be sure

to charge the battery pack before you use it.

The life of a battery pack is limited, and charging a battery pack causes it to

gradually lose its ability to maintain the charge. If your battery pack seems to

require charging very frequently, it probably means it is time to purchase a new one.

If a battery pack is used past the end of its service life, it may swell up in size. In

such a case, replace the battery pack with a new one.

If the backup battery is fully charged, it will maintain the contents of the

terminal's memory (RAM) for approximately 10 minutes when the main battery

pack is removed.

It takes 4 days with the main battery pack installed in the terminal for the

backup battery to be charged fully.

•

E-20

1. Turn the terminal upside down and loosen the hand belt.

.1%-

(4''

2. Slide the left and right lock switches for the battery pack cover to the “FREE”

position, and then remove the battery pack cover.

.1%-

(4''

.1%-

(4''

3. Load a battery pack (HA-D20BAT, HA-D20BAT-A) or large-capacity battery pack

(HA-D21LBAT, HA-D21LBAT-A). Take care that the battery pack is oriented

correctly when you load it. In addition, load the battery pack while making sure that

the end of the battery pack removal tape is protruding above the battery pack.

.1%-

(4''

.1%-

(4''

4. Put back the battery pack cover in the compartment as instructed by the arrows,

and in the illustration and then return the battery pack cover lock switches to the

“LOCK” position ( ).

E-21

Removing

1. Make sure that the Handheld Terminal is turned off.

If the power is on, press the power key to turn it off.

2. Turn the terminal upside down and loosen the hand belt.

3. Refer to “Loading” on the previous page and remove the battery pack cover.

4. Remove the battery pack by pulling up the removal tape as shown in the illustration.

Loading the large-capacity battery pack into the Handheld Terminal

After loading the large-capacity battery pack, you need to use the special large-capacity

battery pack cover in place of the standard battery pack cover.

“Loading and Removing” of the large-capacity battery pack cover is the same as those

for the standard battery pack cover.

Important!

When removing the battery pack, make sure you do not leave the Handheld

Terminal without a battery pack for more than about 10 minutes. Doing so can

cause data in the memory to be deleted.

When removing the battery pack, be sure you carefully follow the proper

procedure as explained in this guide.

Never try to use other type of battery than the ones that are speciﬁ ed for this

product.

When removing the battery pack, pull the removal tape straight up and remove

the battery pack. Removing with excessive force can damage the battery pack.

Before starting to use the Handheld Terminal, ensure that the battery pack cover

is properly closed. If not, the power is not turned on or is turned off abruptly

while it is in use.

•

E-22

Charging the Battery Pack

Battery pack installed in the terminal can be charged using either cradle, battery

charger or AC adaptor (AD-S15050B). Battery charge condition can be monitored with

Indicator 1 on the terminal. Multiple battery packs can also be charged simultaneously

using Dual Battery Charger.

USB Cradle/Ethernet Cradle/Cradle-type Battery Charger

AD-S42120C-N5

AD-S42120B

Status of Indicator 1 on IT-800:

Orange: Charging

Red: Standby due to battery pack error or the surrounding temperature is out of the

charging temperature range

(charging begins when the temperature is within the charging temperature range)

Green: Charging complete

Car Mounted-type Battery Charger

Before the use of the Car Mounted-type Battery Charger for WWAN models, remove a

small plate (see the ﬁ gure below) on the charger.

For other models, you do not need to remove the plate. Proceed the step below.

Plug in the Car Power Cable accompanied in the box to the Car Mounted-type Battery

Charger as illustrated below and the other end to the cigarette lighter socket in vehicle.

The power LED on the front of the Car Mounted-type Battery Charger will light green

if the Handheld Terminal has been properly mounted.

Status of Indicator 1 on IT-800:

Refer to “USB Cradle/Ethernet Cradle/Cradle-type Battery Charger” above.

E-23

Dual Battery Charger

Taking care that the battery pack is oriented correctly, insert it into the Dual Battery

Charger.

This causes the Charge Indicator LED to light in red, indicating that charging has

started.

AD-S42120C-N5

AD-S42120B

You can connect up to three Dual Battery Chargers.

Status of Charge Indicator LED

Off: Not charging

Red: Charging

Red Flashing: Battery pack problem

Green: Charging complete

Green Flashing: Standby due to the surrounding temperature being beyond the

speciﬁ ed temperature range (Approximately 0°- 40°C) (charging

resumes when the temperature reaches the range.)

AC Adaptor

AD-S15050B

Status of Indicator 1 on IT-800:

Refer to “USB Cradle/Ethernet Cradle/Cradle-type Battery Charger” on the previous

page.

E-24

Handling the Hand Belt

The hand belt is attached to the terminal. Remove it if it is not necessary.

To remove the hand belt

1. As shown in the ﬁ gure, pull out the metal part of the hook while pressing down the

protrude part that has a small dimple on it.

2. Loose the hook-loop fastener and then pull out the belt through the hand belt hook as

shown in the ﬁ gure.

To attach the hand belt

1. Thread one end of the hand belt through the hand belt hook. Then fold it back and set

the belt in proper length by adjusting the hook-loop fastener.

2. As shown in the ﬁ gure, align the metal part of the hand belt hook in line with the

installation position on the terminal and then snap it into the ditch. Make sure that the

metal part is ﬁ rmly seated.

E-25

Connecting the Stylus String

The string can be connected to stylus and hand belt to prevent loss of stylus or

misplacing. Follow the instruction below to connect it to stylus and hand belt.

1. Thread one end of the string through the slit on stylus as shown in the illustration.

2. Thread the other end of the string through the loop as shown in the illustration, and

then pull the other end to tighten.

3. Unhook one end of the hand belt from IT-800 if it is attached, and then thread the

hand belt through the loop of the string as shown in the illustration.

For unhooking the hand belt from the terminal, refer to “To remove the hand belt” on

page 24.

4. Hook the end of the hand belt to the terminal. Refer to “To attach the hand belt” on

page 24.

E-26

Attaching the Neck Strap

The neck strap can be used to prevent the Handheld Terminal from fall when carrying

it around. Since there are two strap holes where the neck strap can be attached, use

the hole that affords the ease of use. Attach the neck strap according to the procedure

described below.

To attach the neck strap

1. Pass the thin cord of the neck strap through the strap hole on the back of the

Handheld Terminal.

2. Pass the other end of the strap (the part you put around your neck) through the loop

formed by the thin cord.

Important!

Do not swing the Handheld Terminal around holding the neck strap.

E-27

Conﬁ guring Handheld Terminal Settings

Calibrating Touch Screen Alignment

Whenever the response of the touch screen is poor, or operation being executed does

not match with the location you are tapping on the touch screen, please recalibrate the

alignment of the touch screen using the following method.

Press the “Fn” key and then press the “4” key after conﬁ rming that “F” is displayed

in the lower right corner of the screen. The following screen is displayed.

∗ You can also display this screen by navigating as follows:

Start  Settings  System  Screen  Align Screen

Press the stylus against the center of the target mark (+ mark) as indicated on the

screen.

After the calibration is complete, the terminal resumes a screen automatically

according to the method carried out to initiate the calibration.

If you start the calibration by pressing "Fn" and "4" keys, the terminal resumes Start

screen, or General tab screen of Settings mode which is the screen one before align

screen of Settings mode if you initiate by navigating to the icons.

•

Produktspezifikationen

Marke:	Casio
Kategorie:	Kasten
Modell:	IT-800
Touchscreen:	Ja
Bildschirmdiagonale:	3.7 "
Eingebautes Mikrofon:	Ja
Integrierte Kamera:	Ja
Installiertes Betriebssystem:	Windows Mobile 6.5
Prozessorhersteller:	Marvell
GPS:	Ja
WLAN:	Ja
WLAN-Standards:	802.11b, 802.11g
Bluetooth:	Nein
Akku-/Batteriekapazität:	- mAh
Breite:	78 mm
Tiefe:	159 mm
Gewicht:	270 g
Produktfarbe:	Schwarz
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	25 mm
Anzahl USB 2.0 Anschlüsse:	1
Unterstützte Sicherheitsalgorithmen:	WPA-AES
Display:	LCD
Lautsprecher:	Mono
Autofokus:	Ja
Eingebauter Blitz:	Ja
Prozessor-Taktfrequenz:	0.624 GHz
Prozessorfamilie:	PXA 320
Kompatible Speicherkarten:	MicroSD (TransFlash)
Auflösung Rückkamera (numerisch):	2 MP
Speicherkapazität:	0.128 GB
Interner Speichertyp:	RAM
Datennetzwerk:	HSPA
Externe Anzeige:	Nein
Sensor-Typ:	CMOS
Maximale Bildauflösung:	- Pixel
Lineare (1D) Barcodes unterstützt:	Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), ITF-14, MSI, U.P.C.
Zweite Kamera:	Nein
ROM-Kapazität:	256 MB
Telefonfunktion:	Nein
RFID-Lesegerät:	Nein
Display-Auflösung:	480 x 640 Pixel