Casio GD-400-4DR Bedienungsanleitung

Casio betrachten GD-400-4DR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio GD-400-4DR (6 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Operation Guide 3434
E-9
Switching Between Time Screens
Each press of cycles the time screens in the sequence shown below.D
DD D
D
Displayed for one second
A
E-8
Timekeeping
The Timekeeping Mode’s Multi Time feature gives you
quick and easy access to the current time and date in
four different cities, numbered from T-1 (Time 1) through
T-4 (Time 4). T-1 is your Home City Time, and T-2,
T-3, and T-4 are Local Times. Local Times are kept in
synchronization with your Home City Time (T-1).
PM indicator
Day of week
Hour : Minutes Seconds
Month – Day
E-7
Alarm Mode Stopwatch Mode
Countdown Timer
Mode
C
C
C
E-6
General Guide
x Press to change from mode to mode.C
x In any mode (except when a setting screen is on the display), press to illuminate L
the display.
Timekeeping Mode World Time Mode
CC
Displayed for one second
E-5
To measure times with the stopwatch ................................................................. E-31
To turn on illumination .......................................................................................... E-33
To specify the illumination duration .................................................................... E-33
To turn the auto light switch on and off .............................................................. E-35
To turn the button operation tone on and off ..................................................... E-38
To turn Flash Alert on and off .............................................................................. E-41
E-4
To toggle the Timekeeping Mode time between DST and
Standard Time ................................................................................................... E-15
To view the time for another city code ................................................................ E-18
To toggle a city code time between Standard Time and
Daylight Saving Time ....................................................................................... E-19
To change your Home Time city to the current World Time city ...................... E-20
To set an alarm time .............................................................................................. E-22
To test the alarm .................................................................................................... E-24
To turn an alarm on and off .................................................................................. E-25
To turn the Hourly Time Signal on and off .......................................................... E-26
To confi gure the countdown timer ...................................................................... E-28
To use the countdown timer ................................................................................. E-29
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
E-3
Contents
Indicators ................................................................................................................. E-2
General Guide ..........................................................................................................E-6
Timekeeping ............................................................................................................. E-8
World Time .............................................................................................................E-18
Alarms .................................................................................................................... E-21
Countdown Timer ..................................................................................................E-27
Stopwatch .............................................................................................................. E-30
Illumination ............................................................................................................ E-32
Reference ............................................................................................................... E-36
Specifi cations ........................................................................................................E-44
E-2
Indicators
Graphic area B
page E-36
Graphic area A
page E-36
PM indicator
page E-8, E-16
Auto light switch on indicator
page E-32, E-35
DST indicator
page E-15, E-19
Flash Alert on indicator
page E-41
Hourly Time Signal on indicator
page E-26
Alarm on indicator
page E-21
Mute indicator
page E-37
E-1
About This Manual
x Depending on the model of your watch, display text appears
either as dark fi gures on a light background or light gures
on a dark background. All sample displays in this manual are
shown using dark fi gures on a light background.
x Button operations are indicated using the letters shown
in the illustration.
x Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA1405-EA © 2014 CASIO COMPUTER CO., LTD.
Operation Guide 3434
E-19
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use and to display the D B
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down for about one second to toggle Daylight A
Saving Time ( displayed) and Standard Time ( DST DST
not displayed).
x The indicator is on the display whenever you display DST
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
x Note that you cannot switch between Standard Time
and Daylight Saving Time while UTC is selected as the
city code.
DST indicator
E-18
World Time
World Time shows the current time in 48 cities (31 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-6).
To view the time for another city code
While in the World Time Mode, use (eastward) and D
B (westward) to scroll through the city codes (time zones).
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make the necessary changes.
City code
Current time and date in
the zone of the selected
city code
E-17
Swapping the Home City Time with a Local Time
You can use the procedure below to swap the current Home City Time (T-1) with one
of the Local Times (T-2, T-3, T-4).
1. In the Timekeeping Mode, use to display the Local Time that you want to swap D
with the Home City Time.
2. Press and at the same time.A B
E-16
12/24-Hour Format
x With the 12-hour format, the (PM) indicator appears to the left of the hour digits for P
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Changing the City Setting of a Local Time
You can select any one of the city codes in the table at the back of this manual as a
Local Time city.
1. Display the Local Time whose city setting you want to change, and then hold down
A for about one second until the current city code starts to fl ash.
2. Use (east) and (west) to select the city code you want.D B
3. Press to display the DST setting screen.C
4. Press to toggle between Daylight Saving Time (D displayed) and Standard
Time ( displayed).
5. After the settings are the way you want, press .A
E-15
To toggle the Timekeeping Mode time between DST and Standard Time
1. Use to display the current Home City Time (T-1) D
screen.
2. Hold down until the seconds start to fl ash, which A
indicates the setting screen.
3. Press to display the DST setting screen.C
4. Press to toggle between Daylight Saving Time D
( displayed) and Standard Time ( displayed).
5. Press to exit the setting screen.A
x The indicator appears on the Timekeeping screen to DST
indicate that Daylight Saving Time is turned on.
DST indicator
E-14
x See “Daylight Saving Time (DST)” on page E-14 for details about DST setting.
x For information about Flash Alert, see “Flash Alert” (page E-41).
5. Press to exit the setting screen.A
x The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-13
Screen To do this: Do this:
Reset the seconds to .
Press .D
Toggle between Daylight Saving Time ( )
and Standard Time ( ).
Change the city code. Use (east) and (west).D B
Change the hour or minutes. Use (+) and (–).D B
Toggle between 12-hour ( ) and 24-hour
( ) timekeeping. Press .D
Change the year. Use (+) and (–).D B
Change the month or day.
Toggle the setting between 1.5 seconds
( ) and 3 seconds ( ).
Press .D
Toggle between Flash Alert on and ( )
off ( ).
E-12
C C C C C C
CCCCC
Seconds City Code Hour MinutesDST
YearMonthDay
Flash Alert
Illumination Duration Setting
12/24-Hour Format
4. When the setting you want to change is fl ashing, use and to change it as D B
described below.
E-11
Changing the Current Home City Time and Date Settings
1. Use to display the current Home City Time (T-1) D
screen.
2. Hold down until the seconds start to fl Aash, which
indicates the setting screen.
3. Press to move the ashing in the sequence shown C
below to select other settings.
E-10
x While the Home City Time (T-1) screen is displayed, pressing will switch the day A
of the week / month-day indication to the currently selected Home City code and the
T-1 indicator for about one second.
x You can change the current time setting for your Home City Time (T-1) only.
x For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting.
Scrolling through the Time Screens
x In the Timekeeping Mode (page E-6), holding down for about three seconds will D
cycle the time screens in sequence, from T-1 through T-4.
x Pressing any button will display the Home City Time (T-1) screen.
Operation Guide 3434
E-29
To use the countdown timer
Press while in the Countdown Timer Mode to start the D
countdown timer.
x When the end of the countdown is reached, the alarm
sounds for ten seconds or until you stop it by pressing
any button. The countdown time is reset to its starting
value automatically when the alarm sounds.
x Press while a countdown operation is in progress to D
pause it. Press again to resume the countdown.D
x To stop a countdown operation completely, fi rst pause
it (by pressing ), and then press . This returns the D B
countdown time to its starting value.
E-28
To confi gure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down until the current A
countdown start time starts to fl ash, which indicates the
setting screen.
x If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-29) to display it.
2. Press to move the ashing in the sequence shown C
below to select other settings.
Hours CMinutes CSeconds
C
3. When the setting you want to change is fl ashing, use (+) and (–) to change D B
the fl ashing item.
xTo specify a countdown start time of 24 hours, set .
4. Press to exit the setting screen.A
E-27
Countdown Timer
The countdown timer can be set within a range of
one second to 24 hours. An alarm sounds when the
countdown reaches zero.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
Minutes
Hours
Seconds
1/10 second
E-26
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use to select the Hourly Time D
Signal.
2. Press to toggle it on and off.A
x The Hourly Time Signal on indicator is shown on the
display in all modes while this function is turned on.
Hourly Time Signal on
indicator
E-25
To turn an alarm on and off
1. In the Alarm Mode, use to select an alarm.D
2. Press to cycle through the alarm settings as shown below.A
A A
Alarm Off One-Time Alarm
On
Daily Alarm On
A
x In all modes, the alarm on indicator is shown for the alarm that is currently turned
on.
x The alarm on indicator fl ashes while the alarm is sounding.
E-24
Alarm Operation
The alarm tone sounds at the preset time for 20 seconds, regardless of the mode the
watch is in.
x Alarm and Hourly Time Signal operations are performed in accordance with the
Home City Time (T-1).
x To stop the alarm tone after it starts to sound, press any button.
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-23
3. Press to move the ashing in the sequence shown below to select other C
settings.
Hour Minutes
One-time Alarm/Daily Alarm Selection
C
C
C
4. While a setting is fl ashing, use and to change it as described below.D B
Screen To do this: Do this:
Change the hour and
minutes. Use (+) and (–).D B
x With the 12-hour format, set the time
correctly as a.m. or p.m. ( indicator).P
/ Toggle between One-
time Alarm and Daily
Alarm.
Press .D
One-time Alarm on:
Daily Alarm on:
5. Press to exit the setting screen.A
E-22
To set an alarm time
1. In the Alarm Mode, use to scroll through the alarm D
screens until the alarm number you want to set is
displayed. D D
D D
D D
2. After you select an alarm, hold down until the hour setting of the alarm time A
starts to fl ash, which indicates the setting screen.
x This operation turns on the One-time Alarm automatically.
E-21
Alarms
Your watch has a total of fi ve alarms, each of which you
can confi gure as a daily alarm or one-time alarm.
x Daily Alarm: Sounds at the preset time each day.
x One-time Alarm: Sounds once at the preset time and
then is disabled automatically.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
x All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing (page E-7).C
x Alarms operate in coordination with the current Home
City Time.
Alarm on indicator
Alarm number
Alarm time
(Hour : Minutes)
E-20
To change your Home Time city to the current World Time city
1. In the World Time Mode, use and to display the city you want to make your D B
new Home Time city.
2. Press and at the same time.A B
x This makes the World Time city you selected in step 1 your new Home Time city.


Produktspezifikationen

Marke: Casio
Kategorie: betrachten
Modell: GD-400-4DR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio GD-400-4DR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Casio

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-