Casio GD-120CM-8 Bedienungsanleitung

Casio Armbanduhr GD-120CM-8

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio GD-120CM-8 (6 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

Operation Guide 3427

E-9

Switching Between Time Screens

Each press of cycles the time screens in the sequence shown below.D

Displayed for one second

D D D

E-8

Timekeeping

The Timekeeping Mode’s Multi Time feature gives you

quick and easy access to the current time and date in

four different cities, numbered from T-1 (Time 1) through

T-4 (Time 4). T-1 is your Home City Time, and T-2,

T-3, and T-4 are Local Times. Local Times are kept in

synchronization with your Home City Time (T-1).

PM indicator

Day of week

Hour : Minutes Seconds

Month – Day

E-7

Alarm Mode Stopwatch Mode

C C

Countdown Timer

Mode

E-6

General Guide

x Press to change from mode to mode. C

In any mode (except when a setting screen is on the display), press to illuminate B

the display.

Timekeeping Mode World Time Mode

C C

E-5

To measure times with the stopwatch ................................................................. E-31

To turn on illumination .......................................................................................... E-33

To specify the illumination duration .................................................................... E-33

To turn the auto light switch on and off .............................................................. E-35

To turn the button operation tone on and off ..................................................... E-38

To turn Flash Alert on and off .............................................................................. E-41

E-4

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To toggle the Timekeeping Mode time between DST and

Standard Time .................................................................................................... E-15

To view the time for another city code ................................................................ E-18

To toggle a city code time between Standard Time and

Daylight Saving Time ........................................................................................ E-19

To change your Home Time city to the current World Time city ...................... E-20

To set an alarm time .............................................................................................. E-22

To test the alarm .................................................................................................... E-24

To turn an alarm on and off .................................................................................. E-25

To turn the Hourly Time Signal on and off .......................................................... E-26

To conﬁ gure the countdown timer ...................................................................... E-28

To use the countdown timer ................................................................................. E-29

E-3

Contents

Indicators ................................................................................................................. E-2

General Guide ..........................................................................................................E-6

Timekeeping ............................................................................................................. E-8

World Time .............................................................................................................E-18

Alarms .................................................................................................................... E-21

Countdown Timer ..................................................................................................E-27

Stopwatch .............................................................................................................. E-30

Illumination ............................................................................................................ E-32

Reference ............................................................................................................... E-36

Speciﬁ cations ........................................................................................................E-44

E-2

Indicators

Graphic area A

page E-36

Graphic area B

page E-36

Auto light switch on indicator

page E-32, E-35

DST indicator

page E-15, E-19

PM indicator

page E-8, E-16

Hourly time signal on indicator

page E-26

Alarm on indicator

page E-21

Mute indicator

page E-37

Flash Alert on indicator

page E-41

E-1

About This Manual

x Depending on the model of your watch, display text appears

either as dark ﬁ gures on a light background or light ﬁ gures

on a dark background. All sample displays in this manual are

shown using dark ﬁ gures on a light background.

x Button operations are indicated using the letters shown in

the illustration.

x Each section of this manual provides you with the

information you need to perform operations in each mode.

Further details and technical information can be found in

the “Reference” section.

MA1310-EA

#!3)/#/-054%2#/,4$

Operation Guide 3427

E-19

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use (east) to display the city D

code (time zone) whose Standard Time/Daylight Saving

Time setting you want to change.

2. Hold down for about one second to toggle Daylight A

Saving Time ( displayed) and Standard Time ( DST DST

not displayed).

x The indicator is on the display whenever you display DST

a city code for which Daylight Saving Time is turned on.

x Note that the DST/Standard Time setting affects only

the currently displayed city code. Other city codes are

not affected.

x Note that you cannot switch between Standard Time

and Daylight Saving Time while UTC is selected as the

city code.

DST indicator

E-18

World Time

World Time shows the current time in 48 cities (31 time

zones) around the world.

x All of the operations in this section are performed in

the World Time Mode, which you enter by pressing C

(page E-6).

To view the time for another city code

In the World Time Mode, press to scroll eastwardly D

through city codes.

x For full information about city codes, see the “City Code

Table” at the back of this manual.

x If the current time for a city is wrong, check your

Timekeeping Mode time and time zone settings and

make the necessary changes.

City code

Current time and date in

the zone of the selected

city code

E-17

Swapping the Home City Time with a Local Time

You can use the procedure below to swap the current Home City Time (T-1) with one

of the Local Times (T-2, T-3, T-4).

1. In the Timekeeping Mode, use to display the Local Time that you want to swap D

with the Home City Time.

2. Press and at the same time.A B

E-16

12/24-Hour Format

x With the 12-hour format, the (PM) indicator appears to the left of the hour digits for P

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Changing the City Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual as a

Local Time city.

1. Display the Local Time whose city setting you want to change, and then hold down

A for about one second until the current city code starts to ﬂ ash.

2. Use (east) and (west) to select the city code you want.D B

3. Press to display the DST setting screen.C

4. Press to toggle between Daylight Saving Time (D displayed) and Standard

Time ( displayed).

5. After the settings are the way you want, press .A

E-15

To toggle the Timekeeping Mode time between DST and Standard Time

1. Use to display the current Home City Time (T-1) D

screen.

2. Hold down until the seconds start to ﬂ ash, which A

indicates the setting screen.

3. Press to display the DST setting screen.C

4. Press to toggle between Daylight Saving Time D

( displayed) and Standard Time ( displayed).

5. Press to exit the setting screen.A

x The indicator appears on the Timekeeping screen to DST

indicate that Daylight Saving Time is turned on.

DST indicator

E-14

x See “Daylight Saving Time (DST)” on page E-14 for details about DST setting.

x For information about Flash Alert, see “Flash Alert” (page E-41).

5. Press to exit the setting screen.A

x The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-13

Screen To do this: Do this:

Reset the seconds to .

Press .D

Toggle between Daylight Saving Time ( )

and Standard Time ( ).

Change the city code. Use (east) and (west).D B

Change the hour or minutes. Use (+) and (–).D B

Toggle between 12-hour ( ) and 24-hour

( ) timekeeping. Press .D

Change the year. Use (+) and (–).D B

Change the month or day.

Toggle the setting between 1.5 seconds

( ) and 3 seconds ( ).

Press .D

Toggle between Flash Alert on and ( )

off ( ).

E-12

Seconds DST

Illumination Duration Setting

MinutesHour

Year

12/24-Hour FormatFlash Alert

City Code

Day Month

C C C C CC

CC CCC

4. When the setting you want to change is ﬂ ashing, use and to change it as D B

described below.

E-11

Changing the Current Home City Time and Date Settings

1. Use to display the current Home City Time (T-1) D

screen.

2. Hold down until the seconds start to ﬂ ash, which A

indicates the setting screen.

3. Press to move the ﬂ ashing in the sequence shown C

below to select other settings.

E-10

x While the Home City Time (T-1) screen is displayed, pressing will switch the day A

of the week / month-day indication to the currently selected Home City code and the

T-1 indicator for about one second.

x You can change the current time setting for your Home City Time (T-1) only.

x For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting.

Scrolling through the Time Screens

x In the Timekeeping Mode (page E-6), holding down for about three seconds will D

cycle the time screens in sequence, from T-1 through T-4.

x Pressing any button will display the Home City Time (T-1) screen.

Operation Guide 3427

E-29

To use the countdown timer

Press while in the Countdown Timer Mode to start the D

countdown timer.

x When the end of the countdown is reached, the alarm

sounds for ten seconds or until you stop it by pressing

any button. The countdown time is reset to its starting

value automatically when the alarm sounds.

x Press while a countdown operation is in progress to D

pause it. Press again to resume the countdown.D

x To stop a countdown operation completely, ﬁ rst pause

it (by pressing ), and then press . This returns the D A

countdown time to its starting value.

E-28

To conﬁ gure the countdown timer

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down until the current A

countdown start time starts to ﬂ ash, which indicates the

setting screen.

x If the countdown start time is not displayed, use the

procedure under “To use the countdown timer” (page

E-29) to display it.

2. Press to move the ﬂ ashing in the sequence shown C

below to select other settings.

Hours

Minutes

Seconds

3. When the setting you want to change is ﬂ ashing, use (+) and (–) to change D B

the ﬂ ashing item.

xTo specify a countdown start time of 24 hours, set .

4. Press to exit the setting screen.A

E-27

Countdown Timer

The countdown timer can be set within a range of one

second to 24 hours. An alarm sounds when the countdown

reaches zero.

x All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing C

(page E-7).

Minutes

Hours

Seconds

1/10 second

E-26

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use to select the Hourly Time D

Signal.

2. Press to toggle it on and off.A

x The Hourly Time Signal on indicator is shown on the

display in all modes while this function is turned on.

Hourly time signal on

indicator

E-25

To turn an alarm on and off

1. In the Alarm Mode, use to select an alarm.D

2. Press to cycle through the alarm settings as shown below.A

A A

Alarm Off One-Time Alarm

Daily Alarm On

x In all modes, the alarm on indicator is shown for the alarm that is currently turned

on.

x The alarm on indicator ﬂ ashes while the alarm is sounding.

E-24

Alarm Operation

The alarm tone sounds at the preset time for 20 seconds, regardless of the mode the

watch is in.

x Alarm and Hourly Time Signal operations are performed in accordance with the

Home City Time (T-1).

x To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

E-23

3. Press to move the ﬂ ashing in the sequence shown below to select other C

settings.

Hour CMinutes

C C

One-time Alarm/Daily Alarm Selection

4. While a setting is ﬂ ashing, use and to change it as described below.D B

Screen To do this: Do this:

Change the hour and

minutes. Use (+) and (–).D B

x With the 12-hour format, set the time correctly

as a.m. or p.m. ( indicator).P

/Toggle between One-

time Alarm and Daily

Alarm.

Press .D

One-time Alarm on:

Daily Alarm on:

5. Press to exit the setting screen.A

E-22

To set an alarm time

1. In the Alarm Mode, use to scroll through the alarm D

screens until the alarm number you want to set is

displayed. D D

D D

2. After you select an alarm, hold down until the hour setting of the alarm time A

starts to ﬂ ash, which indicates the setting screen.

x This operation turns on the One-time Alarm automatically.

E-21

Alarms

Your watch has a total of ﬁ ve alarms, each of which you

can conﬁ gure as a daily alarm or one-time alarm.

x Daily Alarm: Sounds at the preset time each day.

x One-time Alarm: Sounds once at the preset time and then

is disabled automatically.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

x All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing (page E-7).C

x Alarms operate in coordination with the current Home

City Time.

Alarm on indicator

Alarm number

Alarm time

(Hour : Minutes)

E-20

To change your Home Time city to the current World Time city

1. In the World Time Mode, use to display the city you want to make your new D

Home Time city.

2. Press and at the same time.A B

x This makes the World Time city you selected in step 1 your new Home Time city.

Produktspezifikationen

Marke:	Casio
Kategorie:	Armbanduhr
Modell:	GD-120CM-8
Bandmaterial:	Harz
Wasserfest:	Ja
Uhrmodus:	12 h / 24 h
Timer:	24 h
Kalender:	Ja
Stoppuhr:	Ja
Breite:	51.2 mm
Tiefe:	17.4 mm
Gewicht:	72 g
Akku-/Batterietyp:	CR2025
Höhe:	55 mm
Anzahl unterstützter Akkus/Batterien:	1
Material des Uhrengehäuses:	Harz
Gehäusefarbe:	Grau
LED-Hintergrundbeleuchtung:	Ja
Uhrzifferblatt-Typ:	LCD-Zifferblatt
Wasserdicht bis Tiefe:	200 m
Uhrentyp:	Armbanduhr
Wasserdicht bis Druck:	20 ATM
Kalender-Typ:	Tag
Hauptfarbe Band:	Grau
Uhrenglas-Typ:	Mineral
Gehäuseform:	Rund
Mechanismus-Typ:	Elektronisch
Weckerfunktion:	Ja
Batterie Lebensdauer:	7 Jahr(e)
Stoßfest:	Ja
Weltzeitfunktion:	Ja
Countdown-Funktion:	Ja
Akkurazität:	±15 Sek/Monat