Casio G-Shock MRG-G2000CB-1ADR Bedienungsanleitung

Casio betrachten G-Shock MRG-G2000CB-1ADR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio G-Shock MRG-G2000CB-1ADR (26 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/26
Contents
Basic Operations
Watch Face Items
Navigating Between Modes
Mode Overview
Using the Crown
Hand and Day Indicator Movement
Solar Charging
Auto Time Adjustment
Checking the Receive Operation Result
Using the Watch in a Medical Facility or
Aircraft
Checking the Current Home City
Time Adjustment (GPS, Time
Calibration Signal)
Time Adjustment Using GPS
Appropriate Signal Reception Location
Acquiring GPS Position Information
Manually
Acquiring GPS Time Information Manually
Receiving a Time Information
Automatically
Leap Second Reception
Time Adjustment Using a Time Calibration
Signal
Appropriate Signal Reception Location
Time Calibration Signal Reception
Ranges
Auto Time Calibration Signal Receive
Signal Reception Precautions
MA1710-EB © 2017 CASIO COMPUTER CO., LTD.
Using Mobile Link with a Mobile
Phone
Getting Ready
A
A
A
AA
Installing the Required App on Your
Phone
B
B
B
BB
Configuring Bluetooth Settings
C
C
C
CC
Pairing the Watch with a Phone
Auto Time Adjustment
Configuring World Time Settings
Adjusting Hand and Day Indicator Alignment
Configuring Watch Settings
Changing the Home City Summer Time Setting
Checking the Watch Charge Level
Connection
Connecting with a Phone
Disconnecting from a Phone
Unpairing
If you purchase another phone
Adjusting Time Settings
Manually
Setting a Home Time City
Changing Your Home City Time Setting in 15-
minute Steps
Adjusting the Time and Day Setting
World Time
Specifying a World Time City
Changing the World Time Setting in 15-minute
Steps
Swapping Your Home City Time and World
Time
Stopwatch
Measuring Elapsed Time
Timer
Setting the Timer Start Time
Using the Timer
Alarms
Configuring Alarm Settings
Enabling/Disabling the Alarm
Stopping an Alarm
Illumination Light
Turning On the Illumination Light
Adjusting Hand and Day Indicator
Alignment
Adjusting Hand and Day Indicator Alignment
Moving to Another Time Zone
Other Information
City List
Summer Time Table
Map Data Source
Supported Phone Models
Specifications
Mobile Link Precautions
Copyrights and Registered Copyrights
Troubleshooting
Operation Guide 5531
1
Basic Operations
This section provides an overview of the watch
and its operations.
Note
The illustrations included in this
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.
Watch Face Items
ADay of week
In the Timekeeping Mode, the day of the week
hand indicates the day of the week in the
current Home City.
BAirplane Mode mark
While the watch is in the Airplane Mode, the
day of the week hand points to .h
CSignal receive status, location information
availability
When checking the last receive result :
The day of the week hand indicates the
information that was received or acquired for
the last time adjustment.
“P”: GPS signal time or phone time information
and location information
“N”: GPS signal time information or time
calibration signal
When setting the Home City or World Time
City :
The day of the week hand indicates whether
or not location information is available for the
Home City or World Time City.
“P”: Location information available
“N”: Location information not available
DBattery level
The current charge level is temporarily
indicated by the mode hand immediately after
you enter the Timekeeping Mode.
ELatitude
When the watch acquires location
information, or connects with a phone and
adjusts its time setting, the day of the week
hand will indicate the rough latitude of the city
for which information was acquired.
FSummer time setting
The day of the week hand points to the
summer time setting for the current Home City.
GC mark
The second hand points to this mark while
there is a connection between the watch and
a phone.
HRC mark
The second hand points to this mark while
calibration signal reception is in progress.
IAlarm settings
In the Alarm Mode, the second hand indicates
if the alarm is enabled or disabled.
“ON”: Alarm enabled
“OFF”: Alarm disabled
JT (Time) mark
The second hand points to this mark while
GPS (time information) signal reception is in
progress.
KT+P mark
The second hand points to this mark while
GPS (location information) signal reception is
in progress.
LLast signal receive result
The second hand points to the letter that
indicates the result of the last time adjustment
operation by receipt of a signal or connection
with a phone.
“Y(YES)”: Last time adjustment operation
successful.
“N(NO)”: Last time adjustment operation
failed.
Navigating Between Modes
Your watch has the modes shown below.
C C
CC
CC
30
Bluetooth connection
(Approximately
2.5 seconds)
Alarm Mode
While in the Timer Mode
Stopwatch Mode
Timekeeping Mode
Use the (C) button to navigate between
modes.
Hold down (C) for at least one second to return
to the Timekeeping Mode.
To connect with a phone, hold down (C) for
about 2.5 seconds.
Operation Guide 5531
2
Mode Overview
Timekeeping Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands indicate the
current World Time.
30
④ ⑤
Current location
time / World Time
swapping
(Hold down about
3 seconds.)
ACurrent location time (24-hour time)
One revolution every 24 hours.
BCurrent day of the week
CWorld Time hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
DWorld Time hour
EWorld Time minute
FCurrent location date
GWorld Time City
Stopwatch Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
30
③ ④
Start /
Stop
Reset
ACurrent location time (24-hour time)
One revolution every 24 hours.
BStopwatch seconds
CStopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
DStopwatch hours
EStopwatch minutes
Timer Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the current countdown
time.
30
④ ⑤
Start /
Stop
Reset
ACurrent location time (24-hour time)
One revolution every 24 hours.
BTimer seconds
CTimer hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
DTimer hours
ETimer minutes
Alarm Mode
The main hour and minute hands indicate the
current time.
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
30
Enabling /
Disabling the Alarm
ACurrent location time (24-hour time)
One revolution every 24 hours.
BAlarm hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
CAlarm enabled/disabled
DAlarm hour
EAlarm minute
Using the Crown
The watch’s crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Loosen
Crown
Pulling Out and Pushing In the Crown
To perform a crown operation, pull it out to the
first or second click and then rotate it. Do not
pull the crown with too much force.
First click
Normal timekeeping
Second click
Important!
To prevent loss of water resistance
and/or damage due to impact, be
sure to screw the crown in by rotating
it away from you as you push it in.
Screw in
When pushing the crown back in,
take care not to apply too much
force.
Operation Guide 5531
3


Produktspezifikationen

Marke: Casio
Kategorie: betrachten
Modell: G-Shock MRG-G2000CB-1ADR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio G-Shock MRG-G2000CB-1ADR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Casio

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-