Casio G-Shock GA-710B-1A9ER Bedienungsanleitung

Casio betrachten G-Shock GA-710B-1A9ER

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Casio G-Shock GA-710B-1A9ER (7 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/7
Operation Guide 5522
E-9
To do this: Enter this mode: See:
x
View the current time in one of 48 cities (31 time
zones) around the globe
x
Swap Home Time and World Time
World Time Mode E-39
Set an alarm time Alarm Mode E-43
E-8
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
x View the current date in the Home City
x Configure Home City and daylight saving time (DST)
settings
x Configure time and date settings
x Direct timing start from the Timekeeping Mode
x Change the display illumination duration setting
x Enable/disable the button operation tone
Timekeeping Mode E-17
x Use the stopwatch to measure elapsed time
x Use Target Time Alarm Stopwatch Mode E-25
Use the countdown timer Countdown Timer Mode E-36
E-7
Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47
To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47
To change the illumination duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-48
Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-49
Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-52
To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-52
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-54
Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-56
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-58
E-6
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38
Checking the Current Time in a Different Time Zone . . . . . . . . . . . . . . . . . . . E-39
To enter the World Time Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40
To view the time in another time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40
To specify standard time or daylight saving time (DST) for a city . . . . . . . . . . . E-41
To swap your Home City and World Time City . . . . . . . . . . . . . . . . . . . . . . . . E-42
Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-43
To enter the Alarm Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43
To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-44
To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-45
To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-46
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46
E-5
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25
To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26
To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To pause at a split time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To measure two finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To set a target time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30
To use the target time alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31
To stop the alert beeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35
To perform stopwatch timing without using the Target Time Alarm . . . . . . . . . E-35
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36
To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36
To configure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-37
To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38
E-4
Contents
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2
Things to check before using the watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3
Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8
Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17
Configuring Home City Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-18
To configure Home City settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18
To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-20
Adjusting the Digital Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . . .E-21
To configure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-21
E-3
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To configure Home City settings” (page E-18) to configure
your Home City and daylight saving time settings.
Important!
x
Proper World Time Mode data depends on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
2. Set the current time.
x
See “Adjusting the Digital Time and Date Settings” (page E-21).
The watch is now ready for use.
E-2
About This Manual
x
Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x
Button operations are indicated using the letters shown
in the illustration.
x
Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
MA1609-EA © 2016 CASIO COMPUTER CO., LTD.
Operation Guide 5522
E-19
3. After the setting is the way you want, press to return to the Timekeeping A
Mode.
Note
x
You can check the city code and name (English) of your Home City by pressing A.
x
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-18
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down until the A
flashing indicator disappears from the SET Hold
display and the currently selected city code flashes on
the display.
x This indicates the Home City setting mode.
2. Use (+) and (–) to scroll through city codes until D B
the one you want is displayed.
x
For details about city codes, see the “City Code
Table” at the back of this manual.
x
Holding down either button scrolls at high speed.
City Code
E-17
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Hour
Second
Month-DayDay of week
Minute
PM indicator
Hour : Minute
Second
B
E-16
2. Holding down again as you press will cause the hands to return to their L C
normal positions (normal timekeeping).
Note
x
Watch button functions are the same regardless of whether the hands are moved
out of the way or at their normal positions.
x
Changing to another mode will cause the hands to move back to their normal
positions.
x
The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-15
1. While holding down , press L C.
x
This will cause the hour and minute hands to move to a location where they do
not block your view of the digital display.
Example: When the current time is 8:23
Flashes while the hands are moved out of the way.
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all modes.
Auto Return
If you do not perform any operation for about two or three minutes while configuring
settings (setting flashing on the digital display) in any mode, the watch will exit the
setting operation and return to normal display.
Scrolling
The and buttons are used on the setting mode to scroll through data on the B D
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
x
This operation can be performed in any mode. In the case of a setting mode
(setting flashing on the screen), the hands will move out of the way automatically,
even if you do not perform the below operation.
E-13
Alarm Mode Stopwatch Mode
Countdown Timer Mode World Time Mode
C
C
C
C
E-12
x
Press C to cycle between the modes as shown below.
x
To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
Timekeeping Mode
C
B
Each time you press the button, the display will B
change as follows.
E-11
x
In any mode (except a setting mode), press to illuminate the display.L
E-10
Selecting a Mode
x
In the Timekeeping Mode, press to enter the Stopwatch Mode.D
x
For more information about using the Stopwatch Mode, see “To enter the
Stopwatch Mode” (page E-26).
Timekeeping Mode Stopwatch Mode
D
C
Operation Guide 5522
E-29
Note
x
Once started, elapsed time measurement continues until you press to stopD
it, even if you change to a different mode and even if the stopwatch reaches the
elapsed time maximum limit.
Using the Target Time Alarm
You can set a target time in the range of one minute to 24 hours, in units of one
minute.
A beeper will sound for 10 seconds when the elapsed timing of the stopwatch
reaches the target time.
E-28
To perform an elapsed time operation
D D D D B
Start Stop (Resume) (Stop) Reset
To pause at a split time
D B B D B
Start Split
(SPL displayed)
Split release Stop Reset
To measure two finishes
D B D B B
Start Split
(SPL displayed)
First runner finishes.
Display time of first
runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Reset
E-27
2. Now you can perform the same operations as those shown on page E-28.
Entering from Another Mode (including the Timekeeping Mode)
Press as many times as necessary to navigate to the Stopwatch Mode as shown C
on page E-13.
x
To enter from the Timekeeping Mode using this method, press four times.C
x
This will display the stopwatch screen in the same status as it was the last time you
exited the Stopwatch Mode. However, if you exited with a split time displayed, the
split time operation will be released when you return.
E-26
To enter the Stopwatch Mode
You can enter the Stopwatch Mode using any one of the methods below.
Entering Directly from the Timekeeping Mode
If the stopwatch was reset to all zeros the last time you used it, a new elapsed time
operation will start as soon as you enter the Stopwatch Mode.
See page E-28 for information about measuring an elapsed time.
1. In the Timekeeping Mode, press D.
This will result in one of the following, depending on the status of the stopwatch the
last time you exited the Stopwatch Mode.
x If reset (stopped at 0:00 00"00): Timing starts.
One-press timing start from the Timekeeping Mode (direct timing start from the
Timekeeping Mode)
x
If an ongoing timing operation is paused: Timing remains paused.
x
If an ongoing timing operation is in progress*: Timing continues to be performed.
*
An ongoing stopwatch timing operation continues even if you navigate to
another mode from the Stopwatch Mode.
E-25
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two finishes.
x
The measurement range of the stopwatch is 23 hours, 59minutes, 59.99 seconds.
Elapsed time returns to zero automatically and timing continues from there when
the maximum limit is reached.
Seconds
Minutes
Hours
Minutes
1/100 Second
E-24
Note
x
Resetting the seconds to 00 while the current count is in the range of 30 to
59causes the minutes to be increased by 1.
x
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x
The day of the week changes automatically when the date changes.
E-23
3. When the timekeeping setting you want to change is flashing, perform the
operation described below.
Screen To do this: Do this:
Toggle between 12-hour ( ) and 24-hour 12H
(24H) timekeeping Press D.
Reset the seconds to 00 Press D.
Change the hour or minute
Use (+) and (–) to D B
change these settings.
x
Holding down either button
scrolls at high speed.
Change the year
Change the month or day
4. Press to exit the setting mode.A
E-22
2. Press to move the flashing in the sequence shown below to select the other C
settings.
Home City
(page E-18)
CDST
(page E-20)
C
12/24-Hour Format
C
Seconds
C
CHour
C
Illumination Duration
(page E-47) Minute
CC
Button Operation Tone On/Off
(page E-52) C
Day
C
Month
C
Year
E-21
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
To configure the digital time and date settings
1. In the Timekeeping Mode, hold down until the A
flashing indicator disappears from the SET Hold
display and the currently selected city code flashes
on the display.
E-20
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down until the A
flashing indicator disappears from the SET Hold
display and the currently selected city code flashes on
the display.
2. Press to display the DST setting mode.C
3. Press to toggle between Daylight Saving Time (DON)
and Standard Time ( ).OFF
x
Note that you cannot switch between daylight saving
time and standard time while UTC is selected as your
Home City.
4. After the setting is the way you want, press to A
return to the Timekeeping Mode.
x
The indicator appears to indicate that DaylightDST
Saving Time is turned on.
DST indicator

Produktspezifikationen

Marke: Casio
Kategorie: betrachten
Modell: G-Shock GA-710B-1A9ER

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio G-Shock GA-710B-1A9ER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung betrachten Casio

Casio

Casio GW-3000BD-1AER Bedienungsanleitung

9 Oktober 2024
Casio

Casio Edifice EFA-112D-1AVEF Bedienungsanleitung

7 Oktober 2024
Casio

Casio Baby-G BGA-200-1E2ER Bedienungsanleitung

6 Oktober 2024
Casio

Casio MTP-1302D-7A1VEF Bedienungsanleitung

1 Oktober 2024
Casio

Casio Baby-G BG-5600WH-7ER Bedienungsanleitung

30 September 2024
Casio

Casio Edifice EF-316D-1AVEF Bedienungsanleitung

25 September 2024
Casio

Casio GW-A1100-1A3ER Bedienungsanleitung

23 September 2024
Casio

Casio G-Shock GMA-B800 Bedienungsanleitung

21 September 2024
Casio

Casio DW-5600E-1VER Bedienungsanleitung

20 September 2024
Casio

Casio LW-S200H-8AEF Bedienungsanleitung

16 September 2024

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Citizen

Citizen Cal 411X Bedienungsanleitung

7 Oktober 2024
Jaguar

Jaguar J627 Bedienungsanleitung

6 Oktober 2024
Citizen

Citizen CAL 4633 Bedienungsanleitung

5 Oktober 2024
Auriol

Auriol IAN 277495 Bedienungsanleitung

4 Oktober 2024
La Crosse Technology

La Crosse Technology WT-941 Bedienungsanleitung

4 Oktober 2024
Spin Master

Spin Master Dumas SP-5081-11 Bedienungsanleitung

4 Oktober 2024
Michael Kors

Michael Kors Kors Access Scout Hutton MKT4024 Bedienungsanleitung

3 Oktober 2024
Auriol

Auriol IAN 43022 Bedienungsanleitung

2 Oktober 2024
Michael Kors

Michael Kors Kors Access Sofie MKT5039 Bedienungsanleitung

2 Oktober 2024
Citizen

Citizen CAL 5513 Bedienungsanleitung

1 Oktober 2024