Casio G-8900-1ER Bedienungsanleitung

Casio Armbanduhr G-8900-1ER

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio G-8900-1ER (5 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

Operation Guide 3285

E-9

Switching Between Time Screens

Each press of cycles the time screens in the sequence shown below. D

DD D

Displayed for one second

E-8

Timekeeping

PM indicator

Day of week

Hour : Minutes Seconds

Month – Day

The Timekeeping Mode’s Multi Time feature gives you

quick and easy access to the current time and date in

four different cities, numbered from T-1 (Time 1) through

T-4 (Time 4). T-1 is your Home City Time, and T-2,

T-3, and T-4 are Local Times. Local Times are kept in

synchronization with your Home City Time (T-1).

E-7

Alarm Mode Stopwatch ModeCountdown Timer

Mode

E-6

General Guide

Press xC to change from mode to mode.

xIn any mode (except when a setting screen is on the display), press to illuminate L

the display.

Timekeeping Mode World Time Mode

E-5

To measure times with the stopwatch ................................................................. E-31

To turn on illumination .......................................................................................... E-33

To specify the illumination duration .................................................................... E-33

To turn the auto light switch on and off .............................................................. E-35

To turn the button operation tone on and off ..................................................... E-38

To turn Flash Alert on and off .............................................................................. E-41

E-4

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To toggle the Timekeeping Mode time between DST and

Standard Time .................................................................................................... E-15

To view the time for another city code ................................................................ E-18

To toggle a city code time between Standard Time and

Daylight Saving Time ........................................................................................ E-19

To change your Home Time city to the current World Time city ...................... E-20

To set an alarm time .............................................................................................. E-22

To test the alarm .................................................................................................... E-24

To turn an alarm on and off .................................................................................. E-25

To turn the Hourly Time Signal on and off .......................................................... E-26

To conﬁ gure the countdown timer ...................................................................... E-28

To use the countdown timer ................................................................................. E-29

E-3

Contents

Indicators .................................................................................................................E-2

General Guide ..........................................................................................................E-6

Timekeeping .............................................................................................................E-8

World Time .............................................................................................................E-18

Alarms ....................................................................................................................E-21

Countdown Timer ..................................................................................................E-27

Stopwatch ..............................................................................................................E-30

Illumination ............................................................................................................E-32

Reference ............................................................................................................... E-36

Speciﬁ cations ........................................................................................................E-44

E-2

Indicators

Graphic area B

page E-36

Graphic area A

page E-36

PM indicator

page E-8, E-16

Auto light switch on indicator

page E-32, E-35

DST indicator

page E-15, E-19

Flash Alert on indicator

page E-41

Hourly Time Signal on indicator

page E-26

Alarm on indicator

page E-21

Mute indicator

page E-37

E-1

About This Manual

Depending on the model of your watch, display text appears x

either as dark ﬁ gures on a light background or light ﬁ gures on a

dark background. All sample displays in this manual are shown

using dark ﬁ gures on a light background.

Button operations are indicated using the letters shown in x

the illustration.

Each section of this manual provides you with the information x

you need to perform operations in each mode. Further details

and technical information can be found in the “Reference”

section.

MA1107-EA

Operation Guide 3285

E-19

To toggle a city code time between Standard Time and Daylight Saving Time

DST indicator

In the World Time Mode, use 1. and to display the D B

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

Hold down 2. for about one second to toggle Daylight A

Saving Time ( displayed) and Standard Time ( DST DST

not displayed).

The xDST indicator is on the display whenever you display

a city code for which Daylight Saving Time is turned on.

Note that the DST/Standard Time setting affects only x

the currently displayed city code. Other city codes are

not affected.

Note that you cannot switch between Standard Time x

and Daylight Saving Time while UTC is selected as the

city code.

E-18

World Time

City code

Current time and date in

the zone of the selected

city code

World Time shows the current time in 48 cities (31 time

zones) around the world.

All of the operations in this section are performed in x

the World Time Mode, which you enter by pressing C

(page E-6).

To view the time for another city code

While in the World Time Mode, use (eastward) and D B

(westward) to scroll through the city codes (time zones).

For full information about city codes, see the “City Code x

Table” at the back of this manual.

If the current time for a city is wrong, check your x

Timekeeping Mode time and time zone settings and

make the necessary changes.

E-17

Swapping the Home City Time with a Local Time

You can use the procedure below to swap the current Home City Time (T-1) with one

of the Local Times (T-2, T-3, T-4).

In the Timekeeping Mode, use 1. to display the Local Time that you want to swap D

with the Home City Time.

Press 2. and at the same time.A B

E-16

12/24-Hour Format

With the 12-hour format, the xP (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without x

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x

applied in all other modes.

Changing the City Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual as a

Local Time city.

Display the Local Time whose city setting you want to change, and then hold down 1.

A for about one second until the current city code starts to ﬂ ash.

Use 2. (east) and (west) to select the city code you want.D B

Press 3. to display the DST setting screen.C

Press 4. to toggle between Daylight Saving Time (D displayed) and Standard

Time ( displayed).

After the settings are the way you want, press 5. .A

E-15

To toggle the Timekeeping Mode time between DST and Standard Time

DST indicator

Use 1. to display the current Home City Time (T-1) D

screen.

Hold down 2. until the seconds start to ﬂ ash, which A

indicates the setting screen.

Press 3. to display the DST setting screen.C

Press 4. to toggle between Daylight Saving Time D

( displayed) and Standard Time ( displayed).

Press 5. to exit the setting screen.A

The xDST indicator appears on the Timekeeping screen to

indicate that Daylight Saving Time is turned on.

E-14

See “Daylight Saving Time (DST)” on page E-14 for details about DST setting. x

For information about Flash Alert, see “Flash Alert” (page E-41). x

Press 5. to exit the setting screen.A

The day of the week is displayed automatically in accordance with the date (year, x

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-13

Screen To do this: Do this:

Reset the seconds to .

Press .D

Toggle between Daylight Saving Time ( )

and Standard Time ( ).

Change the city code. Use (east) and (west).D B

Change the hour or minutes. Use (+) and (–).D B

Toggle between 12-hour ( ) and 24-hour

( ) timekeeping. Press .D

Change the year. Use (+) and (–).D B

Change the month or day.

Toggle the setting between 1.5 seconds

( ) and 3 seconds ( ).

Press .D

Toggle between Flash Alert on and ( )

off ( ).

E-12

C C C C C C

CCCCC

Seconds DST City Code Hour Minutes

YearMonthDay

Flash Alert

Illumination Duration Setting

12/24-Hour Format

When the setting you want to change is ﬂ ashing, use 4. and to change it as D B

described below.

E-11

Changing the Current Home City Time and Date Settings

Use 1. to display the current Home City Time (T-1) D

screen.

Hold down 2. until the seconds start to ﬂ ash, which A

indicates the setting screen.

Press 3. to move the ﬂ ashing in the sequence shown C

below to select other settings.

E-10

While the Home City Time (T-1) screen is displayed, pressing xA will switch the day

of the week / month-day indication to the currently selected Home City code and the

T-1 indicator for about one second.

You can change the current time setting for your Home City Time (T-1) only. x

For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting. x

Scrolling through the Time Screens

In the Timekeeping Mode (page E-6), holding down xD for about three seconds will

cycle the time screens in sequence, from T-1 through T-4.

Pressing any button will display the Home City Time (T-1) screen. x

Operation Guide 3285

E-29

To use the countdown timer

Press while in the Countdown Timer Mode to start the D

countdown timer.

When the end of the countdown is reached, the alarm x

sounds for ten seconds or until you stop it by pressing

any button. The countdown time is reset to its starting

value automatically when the alarm sounds.

Press xD while a countdown operation is in progress to

pause it. Press again to resume the countdown.D

To stop a countdown operation completely, ﬁ rst pause x

it (by pressing ), and then press . This returns the D B

countdown time to its starting value.

E-28

To conﬁ gure the countdown timer

While the countdown start time is on the display in the 1.

Countdown Timer Mode, hold down until the current A

countdown start time starts to ﬂ ash, which indicates the

setting screen.

If the countdown start time is not displayed, use the x

procedure under “To use the countdown timer” (page

E-29) to display it.

Press 2. to move the ﬂ ashing in the sequence shown C

below to select other settings.

Hours CMinutes CSeconds

When the setting you want to change is ﬂ ashing, use 3. (+) and (–) to change D B

the ﬂ ashing item.

To specify a countdown start time of 24 hours, set x.

Press 4. to exit the setting screen.A

E-27

Countdown Timer

Minutes

Hours

Seconds

1/10 second The countdown timer can be set within a range of one

second to 24 hours. An alarm sounds when the countdown

reaches zero.

All of the operations in this section are performed in the x

Countdown Timer Mode, which you enter by pressing C

(page E-7).

E-26

To turn the Hourly Time Signal on and off

Hourly Time Signal on

indicator

In the Alarm Mode, use 1. to select the Hourly Time D

Signal.

Press 2. to toggle it on and off.A

The Hourly Time Signal on indicator is shown on the x

display in all modes while this function is turned on.

E-25

To turn an alarm on and off

In the Alarm Mode, use 1. to select an alarm.D

Press 2. to cycle through the alarm settings as shown below.A

A A

Alarm Off One-Time Alarm

Daily Alarm On

In all modes, the alarm on indicator is shown for the alarm that is currently turned x

on.

The alarm on indicator ﬂ ashes while the alarm is sounding. x

E-24

Alarm Operation

The alarm tone sounds at the preset time for 20 seconds, regardless of the mode the

watch is in.

Alarm and Hourly Time Signal operations are performed in accordance with the x

Home City Time (T-1).

To stop the alarm tone after it starts to sound, press any button. x

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

E-23

Press 3. to move the ﬂ ashing in the sequence shown below to select other C

settings.

Hour Minutes

One-time Alarm/Daily Alarm Selection

While a setting is ﬂ ashing, use 4. and to change it as described below.D B

Screen To do this: Do this:

Change the hour and

minutes. Use (+) and (–).D B

With the 12-hour format, set the time correctly x

as a.m. or p.m. ( indicator).P

/Toggle between One-

time Alarm and Daily

Alarm.

Press .D

One-time Alarm on:

Daily Alarm on:

Press 5. to exit the setting screen.A

E-22

To set an alarm time

In the Alarm Mode, use 1. to scroll through the alarm D

screens until the alarm number you want to set is

displayed. D D

D D

After you select an alarm, hold down 2. until the hour setting of the alarm time A

starts to ﬂ ash, which indicates the setting screen.

This operation turns on the One-time Alarm automatically. x

E-21

Alarms

Alarm on indicator

Alarm number

Alarm time

(Hour : Minutes)

Your watch has a total of ﬁ ve alarms, each of which you

can conﬁ gure as a daily alarm or one-time alarm.

Daily Alarm: Sounds at the preset time each day. x

One-time Alarm: Sounds once at the preset time and x

then is disabled automatically.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

All of the operations in this section are performed in x

the Alarm Mode, which you enter by pressing (page C

E-7).

Alarms operate in coordination with the current Home x

City Time.

E-20

To change your Home Time city to the current World Time city

In the World Time Mode, use 1. and to display the city you want to make your D B

new Home Time city.

Press 2. and at the same time.A B

This makes the World Time city you selected in step 1 your new Home Time city. x

Produktspezifikationen

Marke:	Casio
Kategorie:	Armbanduhr
Modell:	G-8900-1ER
Bandmaterial:	Harz
Wasserfest:	Ja
Uhrmodus:	12 h / 24 h
Timer:	Ja
Kalender:	Ja
Breite:	55.1 mm
Tiefe:	52.5 mm
Gewicht:	69 g
Akku-/Batterietyp:	CR2016
Höhe:	16.3 mm
Anzahl unterstützter Akkus/Batterien:	1
Produktdesign:	Sport
Gehäusefarbe:	Black, Blue
Uhrzifferblatt-Typ:	LED-Zifferblatt
Wasserdicht bis Tiefe:	200 m
Uhrentyp:	Armbanduhr
Hauptfarbe Band:	Schwarz
Uhrenglas-Typ:	Mineral
Gehäuseform:	Rund
Hauptfarbe Zifferblatt:	Blau
Markierungstyp:	Arabischen Ziffern
Geschlecht:	Männlich
Weckerfunktion:	Ja
Batterie Lebensdauer:	3 Jahr(e)
Stoßfest:	Ja
Weltzeitfunktion:	Ja
Countdown-Funktion:	Ja
Akkurazität:	15 Sek/Monat