Casio G-7700-1ER Bedienungsanleitung

Casio Armbanduhr G-7700-1ER

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio G-7700-1ER (5 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

Operation Guide 3095

MA0707-EA

About This Manual

•Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Press .

Timekeeping Mode Stopwatch Mode Recall Mode Countdown Timer Mode Alarm Mode World Time Mode

General Guide

•Press C to change from mode to mode.

•In any mode, press L to illuminate the display for about one second.

Hour : Minutes Seconds

PM indicator

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date. You can select from among the three

different Timekeeping Mode screens shown below.

•Whenever you enter the Timekeeping Mode from

another mode, the indicator in the upper left corner of

the screen will show if the Dual Time screen isDUAL

selected. If the Home City Time screen or Elapsed/

Remaining Day screen is selected, the indicator will

show HT.

Week number

Day of week Elapsed

number of days

Dual Time City code

Current time in

Dual Time City

Current day of

the week in

Dual Time City

Current date in

Dual Time City

Remaining

number of days

Month – Day

Year

Home City Time Elapsed/Remaining Days Dual Time

Press .

•You can use in the Timekeeping Mode to cycle through the different screensD

shown above, which changes the information in the top of the screen.

•The Elapsed/Remaining Days screen shows the number of days that have elapsed

from January 1 of the current year (Elapsed Days), and the number of days

remaining until December 31 of the current year (Remaining Days).

•The Dual Time screen shows the current time in your Home City and another city

(Dual Time City).

Read This Before You Set the Time and Date!

The time setting of the Dual Time City as well as all of the times in the World Time

Mode are based on the current time you set for your Home City in the Timekeeping

Mode. Because of this, make sure you select a city code for your Home City (the city

where you normally use the watch) before you set the time and date.

•For full information on city codes, see the “City Code Table”.

•For more information about Dual Time, see Using Dual Time“ ”.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds

Seconds DST City Code Hour Minutes

Day Month Year

12/24-Hour FormatContrast Adjustment

Week Count MethodFlash Alert

Screen

OFF

TYO

10:58

12H

2008

6-30

To do this:

Reset the seconds to 00

Toggle between Daylight Saving

Time (ON) and Standard Time (OFF)

Change the city code

Change the hour or minutes

Toggle between 12-hour ( )12H

and 24-hour ( ) timekeeping24H

Change the year

Change the month or day

Do this:

Press .D

Use D (east) and B (west).

Use ).D (+) and B (–

Press .D

Use ).D (+) and B (–

3. When the setting you want to change is flashing, use and to change it asD B

described below.

•See “Daylight Saving Time (DST) for details about the DST setting.”

•The following shows where you should go in order to find more information about

the above settings.

Week count method: “Week Number”

Flash alert: “Flash Alert”

Contrast adjustment: “Contrast Adjustment”

4. Press A twice to exit the setting screen.

•The first press of A will display the Dual Time setting screen.

•Resetting the seconds to 00 while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to 00 without changing the minutes.

•The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (ON

displayed) and Standard Time (OFF displayed).

4. Press A twice to exit the setting screen.

•The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

To count like this:

Start each week from Monday, and count the week that contains

the first Thursday as the first week of the year.

• This counting method is specified by ISO8601.

• Due to the ways that weeks are counted, the year of a particular

week may be different from a date that occurs during that week.

Example: January 1, 2005 is Week 53 of 2004

Start each week from Monday, and count the week that contains

January 1 as the first week of the year.

Start each week from Sunday, and count the week that contains

January 1 as the first week of the year.

Select this

counting method:

ISO

MON

SUN

DST indicator

On/Off status

Week Number

The week number shows the number of the current date in the current year. You can

select from among the following three types of week counting methods.

Operation Guide 3095

Current date in

Dual Time City

Dual Time City code

Current time in

Dual Time City

Current day of

the week in Dual Time City

Week countin

method

Week number

To specify the week counting method

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C nine times to display the week count method

screen.

3. Use D B and to cycle through the week counting

methods in the sequence shown below.

Press .

4. Press A twice to exit the setting screen.

Using Dual Time

In the Timekeeping Mode, you can display a Dual Time

screen that shows the current time and date in your Home

City and in one other city (Dual Time City). You can select

the city you want to use as your Dual Time City. You also

can specify Standard Time or Daylight Saving Time for the

Dual Time City.

•The initial factory default Dual Time City setting is NYC

(New York City).

•For information about display the Dual Time screen.

•Whenever you enter the Timekeeping Mode from

another mode, the indicator in the upper left corner of

the screen will show DUAL if the Dual Time screen is

selected. If the Home City Time screen or Elapsed/

Remaining Day screen is selected, the indicator will

show HT.

Dual Time City code

On/Off status

DST indicator

To switch the Dual Time City between Daylight Saving Time and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press A again.

•This will display the Dual Time City DST setting

screen.

3. Press D to toggle the Dual Time between Daylight

Saving Time (ON displayed) and Standard Time (OFF

displayed).

4. Press A to exit the setting screen.

•The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

To change the Dual Time City code

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press A again.

3. Press C once to display the Dual Time City selection

screen.

4. Use D B (east) and (west) to scroll through the

available city codes.

•For full information on city codes, see the “City Code

Table”.

5. Press A to exit the setting screen.

Stopwatch

The 1/1000-second stopwatch measures elapsed time, as well as lap/split times, and

has an Auto-Start feature. Measurements taken using the stopwatch can

be stored in memory for later recall with the Recall Mode.

•“ ”Lap time is the time spent to cover a specific segment of a race, such as one lap

around a track. Split time is the time spent from the beginning of a race up to a“ ”

certain point.

•For information about how data recorded with the stopwatch is stored in memory,

see .“Memory Management”

•The stopwatch measurement operation continues even if you exit the Stopwatch

Mode.

•The stopwatch continues to run, restarting from zero after it reaches its limit, until

you stop it.

•All of the operations in this section are performed in the Stopwatch Mode, which you

enter by pressing C.

•While the stopwatch is stopped and reset to all zeros, you can press B to switch

between the elapsed time and lap time screens.

Elapsed Time Screen Lap Time Screen

Press .

Elapsed time

Lap time Lap number

Split time

Current lap time

Lap time Lap number

Split time

•The Elapsed Time screen is recommended when you want to view the elapsed time

during split/lap time readings.

•The Lap Time screen is recommended when you want to view the current lap time

during split/lap time readings.

•The measurement range of the Elapsed Time Screen elapsed time (bottom of the

screen) and split time (top of the screen) is 9 hours, 59 minutes, 59.999 seconds.

The measurement range of the lap time (center of the screen) is 59 minutes, 59.999

seconds.

•The measurement range of the Lap Time Screen lap time (bottom of the screen) and

split time (top of the screen) is 9 hours, 59 minutes, 59.999 seconds. The display

range of the previous lap time (center of the screen) is 59 minutes, 59.999 seconds.

Elapsed time

Lap time

Lap number

Split time

Elapsed Time Screen

Measuring Elapsed Time

Use the following procedure to perform a basic elapsed time operation with the

stopwatch.

To measure elapsed time

1. While the stopwatch is stopped and reset to all zeros,

press B to display the Elapsed Time screen.

•If the stopwatch is not reset to all zeros, stop the

stopwatch and then press to reset to all zeros.B

2. Press D to start the stopwatch elapsed time operation.

3. Press D to stop the elapsed time operation.

•You can restart the elapsed time operation by pressing

D again.

•After stopping the elapsed time operation, press B to

reset to all zeros.

Current lap time

Lap time

Lap number

Split time

Lap Time Screen

Measuring Split Times and Lap Times

You can use the stopwatch Elapsed Time screen or the Lap Time screen to measure

split times and lap times.

•The Elapsed Time screen is recommended when you want to view the elapsed time

during split/lap time readings.

•The Lap Time screen is recommended when you want to view the current lap time

during split/lap time readings.

To take split time and lap time readings

1. While the stopwatch is stopped and reset to all zeros,

press B to toggle between the Elapsed Time screen

and Lap Time screen.

•If the stopwatch is not reset to all zeros, stop the

stopwatch and then press to reset to all zeros.B

2. Press D to start the stopwatch elapsed time operation.

3. Press B when you want to take a lap and split time

reading.

•Each press of B will display the lap/split time at that

point. You can take up to 999 lap/split readings during

a single elapsed time operation.

4. Press D when you want to stop the elapsed time

operation.

•You can press to re-start the stopwatch elapsed timeD

operation, if you want.

•The watch’s memory can store up to 99 lap times. If you stop an elapsed time

operation during which you recorded more than 99 lap times, any lap times past Lap

99 will not be stored in watch memory. If you restart the elapsed time operation in

this case, the display will show for the last lap time until you record then-- -- ---' ''

next lap time.

•After stopping the elapsed time operation, press B to reset to all zeros.

•One-digit lap numbers (1 to 9) are displayed using the format “ ”LAP 1 .

Example: Lap time number 8: LAP 8

Two- and three-digit lap numbers (10 to 999) are displayed using the format “ ”L.100

or .“ ”L.50

Example: Lap time number 150: L.150

About Auto-Start

With Auto-Start, the watch performs a 5-second countdown, and the elapsed time

operation starts automatically when the countdown reaches zero. Beeper and flash

alert operations are performed for each of the final four seconds of the countdown.

•When the end of the countdown is reached, a beeper operation is performed

followed by a flash alert operation. The alerts are performed separately to avoid

putting too much load on the battery at the same time.

•When Flash Alert is turned on, the red and green LEDs at the bottom of the display

will flash in time with the Auto-Start countdown beeper.

To use Auto-Start

1. While the stopwatch screen is showing all zeros in the

Stopwatch Mode, press A.

•This displays a 5-second countdown screen.

•To return to the all zeros screen, press again.A

2. Press D to start the countdown.

•A stopwatch elapsed time operation will start

automatically when the end of the countdown is

reached.

•To terminate an ongoing countdown and start the elapsed time operation, press D.

•To cancel an ongoing countdown and return to the 5-second countdown screen,

press .B

Memory Management

Your watch has memory for two elapsed time records . Each elapsed time record“ ”

contains the data (elapsed time, lap times, split times, etc.) recorded from the

beginning to the end of an elapsed time measurement.

While an elapsed time operation is in progress in the Stopwatch Mode, the two

elapsed time records in memory are one for the data being produced by the elapsed

time operation you are performing and one for the data produced by the last elapsed

time operation you completed.

When there is no elapsed time operation in progress in the Stopwatch Mode (when

the stopwatch is reset to all zeros), the two elapsed time records in memory consist of

one for the data produced by the last elapsed time operation you completed and one

more record for the elapsed time operation before the last one.

•Whenever you start a new elapsed time operation, the older record currently in

memory is deleted automatically to make room for the new elapsed time data.

•You can use the Recall Mode to view the elapsed time records that currently are in

the watch s memory.’

Elapsed Time Record Data

Each elapsed time record contains the following data.

Total elapsed time

Up to 99 lap/split time records

Start date (month, day) and time of elapsed time measurement

Best lap time and number record

•Each elapsed time record can contain up to 99 lap/split times. The watch will not

store any more lap/split times after the 99th, but the best lap record will continue to

be updated whenever a new lap time betters the time of the current best lap record.

•If there are multiple lap times in an elapsed time record that are the same as the

time of the best lap, the earliest time is used as the best lap time.

•-- is shown for the best lap time if no lap/split time operation was performed during

the elapsed time operation.

Operation Guide 3095

Using Auto-start

•If you use Auto-start to start a stopwatch operation, the watch will interpret the

beginning of the Auto-start countdown as the starting point of the elapsed time

operation and will start recording elapsed time record data from there.

•If you press B to stop the Auto-start countdown, all of the data in the elapsed time

record will show to indicate that no data was stored.--

Recall Mode

You can use the Recall Mode to view the elapsed time record data (elapsed time, lap

times, split times, etc.) that you measure with the Stopwatch Mode.

•When you enter the Recall Mode, the newest elapsed time record appears first.

•All of the operations in this section are performed in the Recall Mode, which you

enter by pressing C.

To view elapsed time record data

1. Press C to enter the Recall Mode.

•The Best Lap screen of the newer record that currently is in memory will appear

first.

•Press A when you want to switch to the other (older) record. Each press of A

toggles between the two records.

•The data that appears on the Best Lap screen depends on whether you are

viewing the data of a completed elapsed time operation or an ongoing elapsed

time operation.

•In the case of a completed elapsed time operation, the Best Lap screen will

display information like that shown.

•If an elapsed time operation is in progress in the Stopwatch Mode, what is shown

for the time on the Best Lap screen will depend on whether you have the elapsed

time screen or lap time screen selected in the Stopwatch Mode. If you have the

Elapsed Time screen selected in the Stopwatch Mode, the elapsed time will

appear on the Best Lap screen. If you have the Lap Time screen selected, the

lap/split time will appear on the Best Lap screen.

2. When the Best Lap screen of the elapsed time record you want to view is

displayed, use D and B to scroll through the lap/split times in the record.

Press .

Final lap/split timeFirst lap/split timeBest Lap Screen

Elapsed time

Hours : Minutes

Best Lap

indicator

Lap time

Split time

Month/Day

Lap time Lap number

Timekeeping

Mode time

TR2 countdown time

(hours, minutes, seconds)

TR1 countdown time

(hours, minutes, seconds)

Countdown Timer

Your watch comes with two countdown timers named TR1

(Timer 1) and TR2 (Timer 2). The setting range for the

countdown timers is from one second to 99 hours, 59

minutes, 59 seconds. The countdown startsTR2

automatically when the countdown reaches zero.TR1

The countdown timers can be used for interval training

(for example, three minutes running with , 1 minuteTR1

rest with ) or for timing an multi-period event (forTR2

example, 45 minutes of play with , 15 minutes restTR1

with ).TR2

•The initial factory default settings are 10 minutes for

TR1 TR2 and 5 minutes for .

•All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

To configure countdown timer settings

1. In the Countdown Timer Mode, hold down A until the

hour setting of the countdown time starts to flash.TR1

This is the setting screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

TR1

Hours TR1

Minutes TR1

Seconds

TR2

Seconds TR2

Minutes TR2

Hours

3. While a setting is flashing, use D B (+) and (–) to change it.

•Any timer whose start time is will not be used during the countdown timer0:00 00

operation.

4. Set the times of all of the timers that you want.

5. Press A to exit the setting screen.

To perform a countdown timer operation

In the Countdown Timer Mode, press D to start the countdown.TR1

•When the TR1 countdown reaches zero, the TR2 countdown will start automatically.

•To pause the countdown timer that currently is counting down, press . Press D D

again to restart.

•If start time of a countdown timer is zero ( ), that timer will be skipped.0:00 00

•The watch will continue cycling the countdown automatically between TR1 TR2 and

for five countdowns or until you stop the countdown by pressing D.

•When the countdown of either TR1 TR2 or reaches zero, a beeper sounds for about

10 seconds. If a countdown start time is 10 seconds or less, the beeper will sound

for only about one second when the end of the countdown is reached.

•Regardless of the start time for timer TR2, the beeper will sound for about 10

seconds when reaches the end of its fifth countdown.TR2

•When Flash Alert is turned on, the red and green LEDs at the bottom of the display

will flash in time with the beeper that sounds when the TR1 or TR2 countdown

reaches zero.

•An ongoing countdown timer operation continues to be performed even if you exit

the Countdown Timer Mode.

•To stop a countdown timer operation, first press to pause the countdown of theD

current timer, and then press . This will reset the countdown timers to theirB

starting times.

Timekeeping

Mode time

AM indicator

On/Off status

Alarm time

(Hour : Minutes)

Alarms

Your watch has five independent multi-function alarms.

You can set the hour and minute for the alarm time, and

you can select one of four repeat patterns (week day,

weekend, Daily, One-time). One of the alarms is a snooze

alarm.

You also can turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour. You can

specify the Hourly Time Signal repeat pattern, and a start

time and end time.

•There are five alarm screens, each of which shows an

alarm name: to , and AL1 AL4 SNZ. The Hourly Time

Signal is indicated by SIG.

•When you enter the Alarm Mode, the data you were

viewing when you last exited the mode appears first.

•All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Repeat Patterns

You can select from among four repeat patterns for the multi-function alarms, and

three repeat patterns for the Hourly Time Signal.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose settings you want to

configure is displayed.

•Select alarm screen AL1 through AL4 to configure a

normal alarm. Select the SNZ alarm screen to

configure the snooze alarm.

•The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour

setting of the alarm time starts to flash, which indicates

the setting screen.

•This operation turns on the alarm automatically.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Hour

( )HR Minutes

( )MIN Repeat Pattern

( )REP

4. While a setting is flashing, use D B (+) and (–) to change it.

•You can select any one of the four alarm repeat patterns described below.

To configure the alarm to sound:

Daily

Once on the specified date only

Daily on Saturday and Sunday

Daily from Monday through Friday

Select this setting:

DAILY

ONCE

wEND

wDAY

5. Press A to exit the setting screen.

•With the 12-hour format, set the time correctly as a.m. or p.m.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, until you turn the alarm off.

•Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

•To stop the alarm tone after it starts to sound, press any button.

•When Flash Alert is turned on, the red and green LEDs at the bottom of the display

will flash in time with the alarm beeper.

•Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the SNZ setting screen

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press B to toggle it on (on) and off (OFF).

•Turning on an alarm (AL1 AL4 to , or SNZ) displays the

alarm on indicator on its Alarm Mode screen.

•In all modes, the alarm on indicator is shown for any

alarm that currently is turned on.

•The alarm on indicator flashes while the alarm is

sounding.

•The snooze alarm indicator flashes while the snooze

alarm is sounding and during the 5-minute intervals

between alarms.

Snooze alarm

indicator

Alarm on indicator

On/Off status

Produktspezifikationen

Marke:	Casio
Kategorie:	Armbanduhr
Modell:	G-7700-1ER
Bandmaterial:	Harz
Uhrmodus:	12 h / 24 h
Timer:	1/1s - 100h
Kalender:	Ja
Stoppuhr:	Ja
Gewicht:	56 g
Akku-/Batterietyp:	CR2025
Snooze Funktion:	Ja
Anzahl unterstützter Akkus/Batterien:	1
Material des Uhrengehäuses:	Harz
Abmessungen (BxTxH):	45.9 x 14.6 x 52.3 mm
Wasserdicht bis Tiefe:	200 m
Uhrenglas-Typ:	Mineral
Weckerfunktion:	Ja
Batterie Lebensdauer:	5 Jahr(e)
Stoßfest:	Ja
Weltzeitfunktion:	Ja
Akkurazität:	±15 Sek/Monat