Casio Edifice EFA-120L-1A1VEF Bedienungsanleitung

Casio betrachten Edifice EFA-120L-1A1VEF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio Edifice EFA-120L-1A1VEF (4 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Operation Guide 4334

MO0607-EB

Warning!

•The measurement functions built into this watch are not intended for use in taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonably accurate representations only.

•CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully. About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•For the sake of simplicity, the sample displays in this

manual do not show the analog hands of the watch.

•Depending on the model of your watch, display text

appears either as dark ﬁgures on a light background, or

light ﬁgures on a dark background. All sample displays

in this manual are shown using dark ﬁgures on a light

background.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

(Light)

General Guide

•Press C to change from mode to mode.

•In any mode, press L to illuminate the display.

Recall Mode

World Time Mode

Stopwatch Modes

▲

Countdown Timer

Mode

▲

Alarm Mode

Press C.

▲

Hand Setting Mode

TimeKeeping Mode

▲

This watch has two

stopwatch modes. See

“Stopwatches” for more

information.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

This watch features separate digital and analog

timekeeping. The procedures for setting the digital time

and analog time are diﬀerent.

•See “Thermometer” for details about the thermometer.

Setting the Digital Time and Date

This watch is preset with UTC diﬀerential values that

represent each time zone around the globe. Before setting

the digital time, be sure to first set the UTC differential for

your Home Time, which is the location where you normally

will be using the watch.

•Note that World Time mode times are all displayed

based on the time and date settings you conﬁgure in the

Timekeeping Mode.

PM indicator

Hour : Minutes

Seconds

Month – Day

Thermometer

Day of week

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to ﬂash, which indicates the setting

screen.

•Be sure to conﬁgure the correct UTC diﬀerential for

your Home Time before conﬁguring any other

Timekeeping Mode settings.

•See the “UTC Differential/City Code List” for

information about the UTC diﬀerential settings that are

supported.

2. Press C to move the ﬂashing in the sequence shown

below to select other settings.

Seconds

Hour

UTC

Diﬀerential Minutes

Year

DST

Day Month

Seconds

Temperature

Unit

12/24-Hour

Format

Temperature Sensor

Calibration

Screen: To do this:

Reset the seconds to 00

Toggle between Daylight Saving

Time (ON OF) and Standard Time ( )

Specify the UTC diﬀerential

Change the hour or minutes

Toggle between 12-hour ( ) and12H

24-hour ( ) timekeeping2 H4

Do this:

Press D.

Use D (+) and B (–).

Press D.

Use D (+) and B (–).Change the year

Change the month or day

3. When the setting you want to change is flashing, use D and B to change it as

described below.

• The UTC diﬀerential setting range is –12.0 to +14.0, in 0.5-hour units.

• For information about settings other than the time and date, see the following.

Temperature Sensor Calibration: “Thermometer”

Temperature Unit: “Thermometer”

4. Press A to exit the setting screen.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

•The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

•When DST is turned on, the UTC diﬀerential setting range is –11.0 to +15.0, in 0.5-

hour units.

•Any time the seconds setting is changed, the analog hands are adjusted accordingly.

•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1.In the Timekeeping Mode, hold down until theA

seconds start to ﬂash, which indicates the setting

screen.

2. Press once and the DST setting screen appears.C

3. Press to toggle between Daylight Saving Time (D ON

displayed) and Standard Time (OF displayed).

4. Press to exit the setting screen.A

•The DST indicator appears on the Timekeeping, Alarm,

and Hand Setting Mode screens to indicate that

Daylight Saving Time is turned on.

Setting the Analog Time

Perform the procedure below when the time indicated by the analog hands does not

match the time of the digital display.

DST indicator

On/Off status

To adjust the analog time

1. In the Timekeeping Mode, press C six times to enter

the Hand Setting Mode.

2. Hold down A until the current digital time starts to

ﬂash, which indicates the setting screen.

3. Use to adjust the analog setting.D

•Press Donce to advance the hands 20 seconds.

•Hold down D to advance the hands at high speed.

•To lock high speed hands movement, hold down D B to start it and then press

to lock. The hands will continue to advance for one 12-hour cycle or until you

press any button to stop it.

High-speed hand movement also will stop automatically after the time advances

12 hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper)

starts to sound.

4. Press A to exit the setting screen.

•The minute hand will be adjusted slightly to match the seconds when you exit the

setting screen.

•To return to the Timekeeping Mode, press C.

Stopwatches

Your watch has two stopwatch modes: a Single Stopwatch

Mode and a Dual Stopwatch Mode. Both stopwatch

modes measure times in 1/100-second units for the ﬁrst

hour, and in 1-second units after that. In both stopwatch

modes, timing is possible up to 99 hours, 59 minutes,

59.99 seconds.

The Single Stopwatch Mode (ST1) displays the total

elapsed time and lap times for a single vehicle or runner.

The Dual Stopwatch Mode (ST2) can be used to measure

elapsed time for two vehicles or runners at the same time,

including separate lap times and the time diﬀerential

between vehicles or runners.

The data produced by either stopwatch mode is stored

automatically in watch memory, for later recall when you

need it.

•When the elapsed time being kept by either of the stopwatches exceeds 99 hours,

59 minutes, 59.99 seconds, the displayed time returns to all zeros and time

measurement continues from there. Elapsed time measurement continues until you

reset it to all zeros.

•All of the operations in this section are performed in the stopwatch modes, which

you enter by pressing C.

Operation Guide 4334

To select the Single Stopwatch Mode or Dual Stopwatch Mode

In the Stopwatch Mode, press A to toggle the Single Stopwatch Mode and the Dual

Stopwatch Mode.

•You cannot toggle between the Single Stopwatch Mode and Dual Stopwatch Mode

while an elapsed time operation is in progress.

After pressing to reset the elapsed time to all zeros, press again to toggleA A

between stopwatch modes.

•The indicator “

ST1” indicates the Single Stopwatch Mode, while indicates“ ”ST2

the Dual Stopwatch Mode.

Remaining free records

Single Stopwatch

Mode Screen

Dual Stopwatch

Mode Screen

Press .A

▲

•Both the Single Stopwatch Mode screen and the Dual Stopwatch Mode screen show

the number of free memory records available for storing data. The watch’s memory

can hold up to 50 records total, including both Single Stopwatch Mode and Dual

Stopwatch Mode records.

Using the Single Stopwatch Mode

The Single Stopwatch Mode displays the total elapsed time and lap times for a single

vehicle or runner.

Stopwatch mode indicator

To perform a Single Stopwatch Mode operation

1. While the Single Stopwatch Mode screen is displayed,

press D to start elapsed time measurement.

2. To display a lap time, press D while elapsed time

measurement is in progress.

•After about 10 seconds, the upper display will change

automatically to timing of the next lap, with the total

elapsed time shown in the lower display.

•Each press of D during elapsed time measurement

stores the applicable lap number, lap time, and total

elapsed time in memory.

•Lap numbers are displayed in the range of 01 to 99.

After lap 99, pressing does not display a lap timeD

(elapsed time continues without stopping).

•During the first hour, the stopwatch displays elapsed time in minutes, seconds,

and 1/100 second. After the first hour, the display changes to shows hours,

minutes, and seconds.

•Use the Recall Mode to view data in memory.

3. To stop elapsed time measurement and reset, press A.

Total elapsed time

Lap number

Lap time

Using the Dual Stopwatch Mode

The Dual Stopwatch Mode can be used to measure elapsed time for two vehicles or

runners at the same time, including separate lap times and the time differential

between vehicles or runners.

To perform a Dual Stopwatch Mode operation

The table below shows how to time two vehicles or

runners (Measurement A and Measurement B).

•The lower display shows Measurement A, while the

upper display shows Measurement B.

•In the Dual Stopwatch Mode, you can start timing from

either Measurement A or Measurement B.

Measurement B

Measurement A

•The lap number for the current displayed lap time (A or

B) appears in the center left of the display, and the

applicable lap time appears in the upper or lower display.

The other display (upper or lower) shows elapsed time

measurement.

•After about 10 seconds, the display will change

automatically to timing of the next lap.

•Each press of D B or during elapsed time

measurement stores the applicable lap number and lap

time in memory.

Measurement B Lap Time

Lap number

Measurement A Lap Time

Lap time screen

Start first

elapsed

time.

Press D.

Press B.

Display

lap time

screen.

Press D.

Press .B

Start other

elapsed

time.

Press B.

Press D.

Measurement A

Measurement B

Display lap

time of other

elapsed time.

Press B.

Press D.

Reset

elapsed

time to all

zeros.

Press .A

•Lap numbers are displayed in the range of 01 to 99.

After lap 99, pressing does not display a lap timeD

(elapsed time continues without stopping).

•After starting Measurement A or Measurement B

elapsed time measurement and then starting the other

time's elapsed time measurement displaying a lap time

for one of the times will display the other time's lap time

and the difference between Measurement A and

Measurement B. After about 5 seconds, the display will

change automatically to timing of the next lap.

•After you press one of the buttons to display one of the

lap times (without the lap time differential displayed),

pressing the other button displays the other lap time and

the differential between the two laps for about five

seconds.

•The ± indicator on the lap time differential screen“ ”

indicates both times are for the same lap.

• -'--"--“ ” is shown for the lap time differential if it is greater

than 10 minutes.

Measurement B

Lap Time

Measurement A and

Measurement B

differential

•Pressing A stops elapsed time measurement and reset.

•During the first hour, the stopwatch displays elapsed time in minutes, seconds, and

1/100 second. After the first hour, the display changes to shows hours, minutes, and

seconds.

•Use the Recall Mode to view data in memory.

Recalling Stopwatch Data

You can use the Recall Mode to recall and delete

stopwatch data stored in memory.

•Your watch automatically creates logs for storage of

stopwatch data in memory. For information about using

logs, see “Managing Memory Data”.

To recall stopwatch log data

1. Enter the Recall Mode.

•The title screen of the newest log appears first when

you enter the Recall Mode.

2. Use the button to scroll through log title screensA

until the one for the log you want to view is on the

display.

•Logs are numbered from 01 (oldest) to 50.

3. Press (+) or ) to view the log data.D B (–

Log number

Log title screen

Log creation

date

Stopwatch mode in

which the recalled

log data was

measured

Press .B

Press D.

▲

Best lap indicator Lap number of

best lap

Best lap

▲

Lap time

Lap number

▲

Total elapsed time

Recalled log data measured in the Single Stopwatch Mode (ST1)

Press B.

Press D.

▲

Recalled log data measured in the Dual Stopwatch Mode (ST2)

▲

Lap timeLap number

Lap time

Best lap indicator

Best lap

(Measurement A)

Best lap

(Measurement B)

▲

One second

later

Lap number of best lap

(Measurement B)

Lap number of best lap

(Measurement A)

*The best lap time is for the best time in the newest log only. The Best Lap Time

screen is the one that has the best lap indicator.

To delete stopwatch data

1. In the Recall Mode, use to scroll through log title screens until the one for the logA

you want to delete is on the display.

•Displaying lap time data (not the log title screen), deleting the data also will delete

the log that contains the data.

2. Hold down and until the watch beeps and B D “CLR” stops flashing on the

display.

•This will delete all of the data in the currently selected log.

•Deleting the newest log also will delete the best lap time data.

Countdown Timer

You can set the countdown timer within a range of one

minute to 100 hours. An alarm sounds when the

countdown reaches zero.

•You also can select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

•All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

Second

Hours Minutes

To use the countdown timer

Press while in the Countdown Timer Mode to start the countdown timer.D

•When the end of the countdown is reached and auto-repeat is turned off, the alarm

sounds for 10 seconds or until you stop it by pressing any button. The countdown

time is reset automatically to its starting value after the alarm stops.

•When auto-repeat is turned on, the countdown will restart automatically without

pausing when it reaches zero. The alarm sounds when the countdown reaches zero.

•The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

•To stop a countdown operation completely, first pause it (by pressing ), and thenD

press A. This returns the countdown time to its starting value.

To configure countdown start time and auto-repeat settings

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down A until the hour

setting of the countdown start time starts to flash, which

indicates the setting screen.

•If the countdown start time is not displayed, use the

procedure under To use the countdown timer“ ” to

display it.

2. Press C to move the flashing in the sequence shown

below, and select the setting you want to change.

Start Time

(Minutes)

Auto-Repeat

On/Off

Start Time

(Hours)

Auto-repeat on indicator

On/Off status

Operation Guide 4334

3. Perform the following operations, depending on which setting is currently selected

on the display.

•While the start time setting is flashing, use D B (+) and (–) to change it.

•Set 0:00 to specify 100 hours.

•While the auto-repeat on/off setting (0N 0F or ) is flashing on the display, press

D to toggle auto-repeat on (0N) and off (0F).

4. Press A to exit the setting screen.

•The auto-repeat on indicator ( ) is displayed on the Countdown Timer Mode

screen while this function is turned on.

•Frequent use of auto-repeat and the alarm can run down battery power.

Alarm

When the alarm is turned on, the alarm sounds when the

alarm time is reached. You also can turn on an Hourly

Time Signal, which will cause the watch to beep twice

every hour on the hour.

•All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Hourly time signal

on indicator

Alarm on indicator

Alarm time

(Hour : Minutes)

AM indicator

To set the alarm time

1. In the Alarm Mode, hold down A until the hour setting

of the alarm time starts to flash, which indicates the

setting screen.

•This operation turns on the alarm automatically.

2. Press C to move the flashing between the hour and

minute settings.

3. While a setting is flashing, use D (+) and B (–) to

change it.

•When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. ( indicator) or p.m. (A P indicator).

4. Press A to exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for 10 seconds, regardless of the mode the watch

is in.

•To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

To turn the daily alarm and the Hourly Time Signal on and off

In the Alarm Mode, press D to cycle through the settings shown below.

•The alarm on indicator and the Hourly Time Signal on indicator are shown on the

display in all modes while these functions are turned on.

Alarm Off

Signal Off

Alarm On

Signal Off

Alarm Off

Signal On

Alarm On

Signal On

Alarm Off

Signal Off

Alarm On

Signal Off

Alarm Off

Signal On

Alarm On

Signal On

Light figures on a dark background

Dark figures on a light background

World Time

The World Time Mode digitally displays the current time in

50 cities (30 time zones) around the world.

•The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check the UTC differential of

your Home Time and the current setting of the

Timekeeping Mode time.

•Select a city code in the World Time Mode to display the

current time in any particular time zone around the

globe. See the “ ”UTC Differential/City Code List for

information about the UTC differential settings that are

supported.

•All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

City code

Current time in

selected city

Date and day of the week

in the selected city

To view the time in another city

While in the World Time Mode, press D to scroll eastward through the city codes

(time zones) or to scroll westward.B

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D B and to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A to toggle Daylight Saving Time (DST

indicator displayed) and Standard Time (DST indicator

not displayed).

•The DST indicator is shown on the World Time screen

while Daylight Saving Time is turned on.

•Note that changing the Daylight Saving Time for any city

code causes the setting to be applied to all city codes.

DST indicator

Illumination

This watch has an EL (electro-luminescent) panel that

causes the entire display to glow for easy reading in the

dark. The watch’s auto light switch turns on illumination

automatically when you angle the watch towards your face.

•The auto light switch must be turned on (indicated by

the auto light switch on indicator) for it to operate.

•See “ ”Illumination Precautions for other important

information about using illumination.

To turn on illumination manually

In any mode, press to illuminate the display for aboutL

1.5 seconds.

•The above operation turns on illumination regardless of

the current auto light switch setting.

Auto light switch

on indicator

About the Auto Light Switch

Turning on the auto light switch causes illumination to turn on, whenever you position

your wrist as described below in any mode, except for the Hand Setting Mode setting

screen.

Moving the watch to a position that is parallel to the ground and then tilting it towards

you more than 40 degrees causes illumination to turn on.

• Wear the watch on the outside of your wrist.

Parallel to

ground

More than

40°

Warning!

••••

•Always make sure you are in a safe place whenever you are reading the

display of the watch using the auto light switch. Be especially careful when

running or engaged in any other activity that can result in accident or injury.

Also take care that sudden illumination by the auto light switch does not

startle or distract others around you.

••••

•When you are wearing the watch, make sure that its auto light switch is turned

off before riding on a bicycle or operating a motorcycle or any other motor

vehicle. Sudden and unintended operation of the auto light switch can create a

distraction, which can result in a traffic accident and serious personal injury.

To turn the auto light switch on and off

In the Timekeeping Mode, hold down D for about three seconds to toggle the auto

light switch on ( displayed) and off ( not displayed).

•The auto light switch on indicator ( ) is on the display in all modes while the auto

light switch is turned on.

•In order to protect against running down the battery, the auto light switch will turn off

automatically about six hours after you turn it on. Repeat the above procedure to

turn the auto light switch back on if you want.

•Illumination is always disabled (regardless of the current auto light switch setting)

while an alarm is sounding.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Stopwatch Modes

The following describes how to perform data storage and measurement in the

stopwatch modes.

Managing Memory Data

Pressing the D button in the Single Stopwatch Mode or the D B or button in the

Dual Stopwatch Mode to start a new elapsed time measurement operation creates a

new log in memory.

A new log is created each time you start a new elapsed time measurement operation.

A log contains a log title screen, and records of all the lap times that are recorded

during elapsed time measurement.

•The capacity of the watch's memory is 50 records.

•If you are adding records to the only log in memory and watch memory becomes

full, adding another record causes the oldest record in the log to be deleted

automatically to make room for the new record.

•If you are adding records to a log when there are multiple logs in memory and watch

memory becomes full, adding another record causes the oldest log in memory and

all of its records to be deleted automatically to make room for new records.

How stopwatch data is stored

The following table shows how stopwatch data is stored when you perform stopwatch

button operations.

Single Stopwatch Mode data

Stopwatch

Button Operation

From all-zeros,

press D to start.

Press D to

display lap time.

Press A to stop

elapsed time

measurrement

and reset.

Data Storage Description

Creates a new log (ST1). Stores the date the button was

pressed, and the log number.

Creates a new record with each button operation. Stores the lap

time and total elapsed time at the point the button is pressed.

Resets the elapsed time to all zeros without recording data.

Stopwatch

Button Operation

From all-zeros,

press D or B to

start.

Press D or B to

display lap time.

Press A to stop

elapsed time

measurement

and reset.

Data Storage Description

Creates a new log (ST2). Stores the date the button was

pressed, and the log number.

Creates a new record with each button operation. Stores the lap

time the point the button is pressed.

Resets the elapsed time to all zeros without recording data.

Dual Stopwatch Mode data

Produktspezifikationen

Marke:	Casio
Kategorie:	betrachten
Modell:	Edifice EFA-120L-1A1VEF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio Edifice EFA-120L-1A1VEF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung betrachten Casio

Casio GW-3000BD-1AER Bedienungsanleitung

9 Oktober 2024

Casio Edifice EFA-112D-1AVEF Bedienungsanleitung

7 Oktober 2024

Casio Baby-G BGA-200-1E2ER Bedienungsanleitung

6 Oktober 2024

Casio MTP-1302D-7A1VEF Bedienungsanleitung

1 Oktober 2024

Casio Baby-G BG-5600WH-7ER Bedienungsanleitung

30 September 2024

Casio Edifice EF-316D-1AVEF Bedienungsanleitung

25 September 2024

Casio GW-A1100-1A3ER Bedienungsanleitung

23 September 2024

Casio G-Shock GMA-B800 Bedienungsanleitung

21 September 2024

Casio DW-5600E-1VER Bedienungsanleitung

20 September 2024

Casio LW-S200H-8AEF Bedienungsanleitung

16 September 2024

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-

Citizen Cal 411X Bedienungsanleitung

7 Oktober 2024

Jaguar J627 Bedienungsanleitung

6 Oktober 2024

Citizen CAL 4633 Bedienungsanleitung

5 Oktober 2024

Auriol IAN 277495 Bedienungsanleitung

4 Oktober 2024

La Crosse Technology WT-941 Bedienungsanleitung

4 Oktober 2024

Spin Master Dumas SP-5081-11 Bedienungsanleitung

4 Oktober 2024

Michael Kors Kors Access Scout Hutton MKT4024 Bedienungsanleitung

3 Oktober 2024

Auriol IAN 43022 Bedienungsanleitung

2 Oktober 2024

Michael Kors Kors Access Sofie MKT5039 Bedienungsanleitung

2 Oktober 2024

Citizen CAL 5513 Bedienungsanleitung

1 Oktober 2024