Casio Collection F-201WAM-7AVEF Bedienungsanleitung
Casio
betrachten
Collection F-201WAM-7AVEF
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio Collection F-201WAM-7AVEF (3 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
Operation Guide 3238
E-9
Alarms
You can set up to fi ve independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time
is reached. One of the alarms can be confi gured as a
snooze alarm or a one-time alarm, while the other four are
one-time alarms.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
There are fi ve alarms numbered x1 through
5. You can
confi gure Alarm1 as a snooze alarm or a one-time alarm.
Alarms 2 through
5 can be used as one-time alarms
only.
All of the operations in this section are performed in the x
Alarm Mode, which you enter by pressing (page E-4).C
Alarm number
Alarm time
(Hour : Minutes)
Alarm date
(Month – Day)
E-8
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D
24-hour timekeeping.
With the 12-hour format, the xP (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without x
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x
applied in all other modes.
E-7
When the setting you want to change is fl ashing, press 3. to change it as D
described below.
To change this setting Perform this button operation
Seconds Press to reset to .D00
Hour, Minutes, Year, Month, Day Press to increase the setting.D
Pressing xD while the seconds are in the range of 30 to 59 resets them to and 00
adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
Press 4. to exit the setting screen.A
The day of the week is automatically displayed in accordance with the date (year, x
month, and day) settings.
The year can be set in the range of 2000 to 2099. x
The watch’s built-in full automatic calendar automatically makes allowances for x
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watch’s battery replaced.
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
To set the time and date
In the Timekeeping Mode, hold down 1. until the A
seconds start to fl ash, which indicates the setting
screen.
Press 2. to move the fl ashing in the sequence shown C
below to select other settings.
Seconds Hour Minutes
Month YearDay
Seconds
Hour : Minutes
PM indicator
Month – Day
Day of week
E-5
In any mode, hold down xC for about one second to return to the Timekeeping
Mode.
Countdown Timer
Mode Stopwatch Mode Dual Time Mode
E-4
General Guide
Press xC to change from mode to mode.
In any mode, press xB to illuminate the display for about one second.
Timekeeping Mode Alarm Mode
Press .C
E-3
To set the Dual Time ............................................................................................. E-21
To illuminate the display ....................................................................................... E-22
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-6
To toggle between 12-hour and 24-hour timekeeping ......................................... E-8
To set an alarm time .............................................................................................. E-11
To test the alarm .................................................................................................... E-13
To turn Alarms 2 through 5 and the Hourly Time Signal on and off ............... E-14
To select the operation of Alarm
1 ...................................................................... E-15
To use the countdown timer .................................................................................E-16
To set the countdown start time ..........................................................................E-17
To turn auto-repeat on and off .............................................................................E-18
To measure times with the stopwatch .................................................................E-20
E-1
Contents
General Guide ..........................................................................................................E-4
Timekeeping .............................................................................................................E-6
Alarms ......................................................................................................................E-9
Countdown Timer ..................................................................................................E-16
Stopwatch ..............................................................................................................E-19
Dual Time ...............................................................................................................E-21
Illumination ............................................................................................................E-22
Reference ............................................................................................................... E-23
Specifi cations ........................................................................................................ E-24
MA1101-EA
E
About This Manual
Depending on the model of your watch, display text x
appears either as dark fi gures on a light background or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown x
in the illustration.
Each section of this manual provides you with the x
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
Operation Guide 3238
E-19
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two fi nishes.
The display range of the stopwatch is 23 hours, 59 x
minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero after x
it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if x
you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen x
on the display clears the split time and returns to elapsed
time measurement.
All of the operations in this section are performed in the x
Stopwatch Mode, which you enter by pressing (page C
E-5).
Seconds
Minutes
Hours
1/100 second
E-18
To turn auto-repeat on and off
In the Countdown Timer Mode, hold down 1. until the A
hours setting of the countdown start time starts to fl ash,
which indicates the setting screen.
Press 2. to toggle auto-repeat on ( displayed) BA.RPT
and off ( not displayed).A.RPT
Note that pressing xB in the above operation also turns
on illumination.
When the end of the countdown is reached while x
auto-repeat is on, the alarm sounds, but the countdown
restarts from the beginning without stopping. You can
stop the countdown by pressing and manually reset to D
the start time by pressing .A
The auto-repeat indicator appears in the Countdown x
Timer Mode only.
Auto-repeat indicator
E-17
The countdown timer measurement operation continues even if you exit the x
Countdown Timer Mode.
Press xD D while a countdown operation is in progress to pause it. Press again to
resume the countdown.
To completely stop a countdown operation, fi rst pause it (by pressing xD), and then
press . This returns the countdown time to its starting value.A
To set the countdown start time
In the Countdown Timer Mode, hold down 1. until the A
hours setting of the countdown start time starts to fl ash,
which indicates the setting screen.
Press 2. to move the fl ashing between the hours and C
minutes settings.
While a setting is fl ashing, use 3. to increase it.D
To set the starting value of the countdown time to 24 x
hours, set 0:00.
Press 4. to exit the setting screen.A
E-16
Countdown Timer
The countdown timer can be set within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero.
You can also select auto-repeat, which automatically x
restarts the countdown from the original value you set
whenever zero is reached.
All of the operations in this section are performed in the x
Countdown Timer Mode, which you enter by pressing C
(page E-5).
To use the countdown timer
Press while in the Countdown Timer Mode to start the D
countdown timer.
When the end of the countdown is reached and auto-repeat is turned off, the alarm x
sounds for 10 seconds or until you stop it by pressing any button. The countdown
time is automatically reset to its starting value after the alarm stops.
Seconds
Minutes
Hours
E-15
To select the operation of Alarm1
In the Alarm Mode, use 1. to select AlarmD1.
Press 2. to cycle through the available settings in the sequence shown below.A
Snooze on indicator (SNZ) and Alarm1 on indicator
One-time
alarm on
Snooze
alarm on Alarm off
The snooze on indicator ( xSNZ) and Alarm1 on indicator are displayed in all modes.
The snooze on indicator ( xSNZ) fl ashes during the 5-minute intervals between
alarms.
The alarm indicator (Alarm x1 on and/or ) fl ashes while the alarm is sounding.SNZ
E-14
To turn Alarms 2 through 5
and the Hourly Time Signal on and off
In the Alarm Mode, use 1. to select a one-time alarm D
(alarm number
2 through 5) or the Hourly Time Signal
(
:00).
Press 2. to toggle it on and off.A
The on/off status of Alarms x2 through
5 and the Hourly
Time Signal is shown by indicators along the bottom of
the displays.
The alarm on indicators and Hourly Time Signal on x
indicator are displayed in all modes.
While an alarm is sounding, the applicable alarm on x
indicator fl ashes on the display.
Hourly Time Signal
on indicator
Alarm on indicator
E-13
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode
the watch is in. In the case of the snooze alarm, the alarm operation is performed a
total of seven times, every fi ve minutes, until you turn the alarm off or change it to a
one-time alarm (page E-14).
To stop the alarm tone after it starts to sound, press any button. x
Performing any one of the following operations during a 5-minute interval between x
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-6)
Displaying the alarm1 setting screen (page E-11)
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-12
Press 3. to move the fl ashing in the sequence shown below to select other C
settings.
Hour Minutes Month Day
While a setting is fl ashing, press 4. to increase it.D
To set an alarm that does not include a month (Daily alarm, Monthly alarm), set xx
for the month. Press until the Dx mark appears (between 12 and 1) while month
setting is fl ashing.
To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set xxx
for the day. Press until the Dxx mark appears (between the end of the month
and 1) while the day setting is fl ashing.
When setting the alarm time using the 12-hour format, take care to set the time x
correctly as a.m. or p.m. ( indicator).P
Press 5. to exit the setting screen.A
E-11
To set an alarm time
In the Alarm Mode, use 1. to scroll through the alarm D
screens until the one whose time you want to set is
displayed.
x1 x2 x3
x5 x4:00
To set a one-time alarm, display one of the screens indicated by an alarm number x
from 2 through 5. To set the snooze alarm, display the screen indicated by
1.
After you select an alarm, hold down 2. until the hour setting of the alarm time A
starts to fl ash, which indicates the setting screen.
This operation automatically turns on the alarm. x
E-10
Alarm Types
The alarm type is determined by the settings you make, as described below.
x Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
x Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specifi c time, on the specifi c date you set.
x 1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at time you set, only during the month you set.
x Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the
alarm to sound every month at time you set, on the day you set.
Operation Guide 3238
E-25
Dual Time: Hour, minutes, seconds, p.m. (P)
Illumination: LED (light-emitting diode)
Battery: One lithium battery (Type: CR2025)
Approximately 10 years on type CR2025 (assuming alarm operation 10 sec./day,
and one illumination operation 1.5 sec./day)
E-24
Specifi cations
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Alarms: 5 Multi-function*alarms (Four one-time alarms; one snooze/one-time alarm);
Hourly Time Signal
* Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm
Countdown Timer
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
Other: Auto-repeat function
Stopwatch
Measuring unit: 1/100 of a second
Measuring capacity: 23:59' 59.99"
Measuring modes: Elapsed time, split time, two fi nishes
E-23
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto return features
If you leave a screen with fl ashing digits for two or three minutes without performing
any operation, the watch automatically saves any settings you have made up to that
point and exits the setting screen.
Data and Setting Scrolling
The button is used to scroll through setting screen data on the display. Holding D
down this button during a scroll operation scrolls through the data at high speed.
E-22
Illumination
An LED (light-emitting diode) and a light guide panel
illuminate the entire display for easy reading in the dark.
Illumination may be hard to see when viewed under direct x
sunlight.
Illumination turns off automatically whenever an alarm x
sounds.
Frequent use of illumination runs down the battery life. x
To illuminate the display
In any mode, press to illuminate the display for about B
one second.
E-21
Dual Time
The Dual Time Mode lets you keep track of time in a different time zone.
In the Dual Time Mode, the seconds count is synchronized with the seconds count x
of the Timekeeping Mode.
To set the Dual Time
Press 1. to enter the Dual Time Mode (page E-5).C
In the Dual Time Mode, hold down 2. until the hour A
setting starts to fl ash, which indicates the setting screen.
Press 3. to change the selection in the following C
sequence.
Hour Minutes
Press 4. to increase the setting.D
Press 5. to exit the setting screen.A
Seconds
Hour : Minutes
E-20
To measure times with the stopwatch
Elapsed time
D D D D A
Start Stop Re-start Stop Clear
Split time
D A A D A
Start Split
( displayed)SPL
Split release Stop Clear
Two Finishes
D A D A A
Start Split
First runner
fi nishes.
Display time of
fi rst runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Clear
Produktspezifikationen
| Marke: | Casio |
| Kategorie: | betrachten |
| Modell: | Collection F-201WAM-7AVEF |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Casio Collection F-201WAM-7AVEF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung betrachten Casio
9 Oktober 2024
7 Oktober 2024
6 Oktober 2024
1 Oktober 2024
30 September 2024
25 September 2024
23 September 2024
21 September 2024
20 September 2024
16 September 2024
Bedienungsanleitung betrachten
- betrachten Medion
- betrachten Clas Ohlson
- betrachten Beper
- betrachten Velleman
- betrachten IKEA
- betrachten Technaxx
- betrachten ADE
- betrachten Auriol
- betrachten Eurochron
- betrachten Irox
- betrachten MarQuant
- betrachten Prologue
- betrachten Renkforce
- betrachten Braun
- betrachten Eta
- betrachten Polar
- betrachten Alpina
- betrachten Pyle
- betrachten Mitsubishi
- betrachten Lynx
- betrachten Topcom
- betrachten Speedo
- betrachten Seiko
- betrachten Calypso
- betrachten Fossil
- betrachten Garmin
- betrachten Jaguar
- betrachten Lotus
- betrachten Michael Kors
- betrachten Skagen
- betrachten Bushnell
- betrachten Citizen
- betrachten Alessi
- betrachten Dugena
- betrachten Krontaler
- betrachten Mondaine
- betrachten Epson
- betrachten Westfalia
- betrachten Suunto
- betrachten BML
- betrachten Swatch
- betrachten Tissot
- betrachten Adidas
- betrachten Ascot
- betrachten Asics
- betrachten Bruno Söhnle
- betrachten Edox
- betrachten Lorus
- betrachten Maurice Lacroix
- betrachten Huawei
- betrachten Omega
- betrachten Kogan
- betrachten TomTom
- betrachten Grand Seiko
- betrachten Armani
- betrachten Bering
- betrachten Breitling
- betrachten Breo
- betrachten Bulova
- betrachten Certina
- betrachten Christiaan Van Der Klaauw
- betrachten Daniel Steiger
- betrachten Davis
- betrachten Detomaso
- betrachten Diesel
- betrachten Ebel
- betrachten Elysee
- betrachten Executive
- betrachten Festina
- betrachten Fila
- betrachten Freestyle
- betrachten Gant
- betrachten Gc
- betrachten Girard-Perregaux
- betrachten Guess
- betrachten Hamilton
- betrachten Holzkern
- betrachten Hugo Boss
- betrachten Ice Watch
- betrachten Invicta
- betrachten IWC
- betrachten Jacques Lemans
- betrachten Junghans
- betrachten Lacoste
- betrachten Longines
- betrachten Luminox
- betrachten Olivia Burton
- betrachten Orient
- betrachten Pulsar
- betrachten Puma
- betrachten Sinn
- betrachten Slazenger
- betrachten Stührling
- betrachten Swiza
- betrachten Timberland
- betrachten Timex
- betrachten TMI
- betrachten Torgoen
- betrachten Tudor
- betrachten TW Steel
- betrachten Versace
- betrachten Zenith
- betrachten Victorinox
- betrachten ETT
- betrachten Boss
- betrachten La Crosse Technology
- betrachten Oregon Scientific
- betrachten Spin Master
- betrachten TicWatch
- betrachten Dakota
- betrachten Danish Design
- betrachten Digi-tech
- betrachten ESQ
- betrachten Ferrari
- betrachten GC Watches
- betrachten Haffstreuner
- betrachten Inter-Quartz
- betrachten Just
- betrachten Kalenji
- betrachten La Crosse
- betrachten Lambretta
- betrachten Marc Jacobs
- betrachten Meister Anker
- betrachten Misfit
- betrachten Movado
- betrachten Naitica
- betrachten Naviforce
- betrachten Nike
- betrachten QQ
- betrachten Rado
- betrachten Rodania
- betrachten Rolex
- betrachten Ronda
- betrachten Skmei
- betrachten Spinnaker
- betrachten Tauchmeister
- betrachten Timer
- betrachten TimeStyle
- betrachten Tommy Hilfiger
- betrachten Uri Minkoff
- betrachten Xonix
- betrachten Shinola
- betrachten Philip Watch
- betrachten Brera
- betrachten Lucien Picard
- betrachten So & Co
- betrachten Nautica
- betrachten Obaku
- betrachten Christopher Ward
- betrachten Hublot
- betrachten Tikkers
- betrachten Audemars Piguet
- betrachten Pilgrim
- betrachten Lars Larsen
- betrachten Klaus Kobec
- betrachten DMC
- betrachten Raketa
- betrachten Balmain
- betrachten Wonky Monkey
- betrachten Iron Annie
- betrachten Julie Julsen
- betrachten KRAEK
- betrachten PAUL HEWITT
- betrachten Radley London
- betrachten PANERAI
- betrachten Zeppelin
- betrachten Hype
- betrachten HYT
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024