Casio BGA-240 Bedienungsanleitung

Casio betrachten BGA-240

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio BGA-240 (7 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
Operation Guide 5382/5465/5508
E-9
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
x View the current time in the Home City
x View the current time in one of 48 cities
(31 time zones) around the globe
All Modes E-10
x View the current date in the Home City
x Confi gure Home City and daylight saving time (DST)
settings
x Confi gure time and date settings
Timekeeping Mode
E-15
E-17
E-20
x Confi gure World Time City and daylight saving time
(DST) settings World Time Mode E-24
x Use the stopwatch to measure elapsed time Stopwatch Mode E-27
x Use the countdown timer Countdown Timer Mode E-30
x Set an alarm time Alarm Mode E-33
E-8
Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38
To adjust hand positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38
Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40
To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-40
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-42
Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43
Specifi cations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-44
Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46
User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-57
E-7
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30
To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30
To confi gure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31
To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-32
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-32
Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-33
To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-33
To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34
To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-35
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35
Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36
To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36
To change the Illumination Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36
E-6
Adjusting the Current Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . .E-20
To confi gure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-20
Checking the Current Time in a Different Time Zone . . . . . . . . . . . . . . . . . . . E-24
To enter the World Time Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25
To view the time in another time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25
To specify standard time or daylight saving time (DST) for a city . . . . . . . . . . . E-26
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-27
To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-27
To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To pause at a split time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To measure two fi nishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
E-5
Contents
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2
Things to check before using the watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4
Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-9
Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-15
To swap your Home City and World Time City . . . . . . . . . . . . . . . . . . . . . . . . E-16
Confi guring Home City Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-17
To confi gure Home City settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17
To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-19
E-4
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-17) to confi gure
your Home City and daylight saving time settings.
Important!
x Proper World Time Mode data depend on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
2. Set the current time.
x See “Adjusting the Current Time and Date Settings” (page E-20).
The watch is now ready for use.
E-3
Module 5382 Module 5465 Module 5508
E-2
About This Manual
x The operational procedures for Modules 5382, 5465 and 5508 are identical. All of
the illustrations in this manual show Module 5382.
x Depending on the model of your watch, display text appears either as dark fi gures
on a light background, or light fi gures on a dark background. All sample displays in
this manual are shown using dark fi gures on a light background.
x Button operations are indicated using the letters shown in the illustration.
x Note that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.
MA1608-EA © 2015 CASIO COMPUTER CO., LTD.
Operation Guide 5382/5465/5508
E-19
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ
appears.
x This indicates the city code setting mode.
x The hour and minute hands automatically move out of
the way at this time (page E-13).
2. Press C to display the DST setting mode.
3. Press D to toggle between Daylight Saving Time (ON)
and Standard Time (OFF).
x Note that you cannot switch between daylight saving
time and standard time while UTC is selected as your
Home City.
4. After the setting is the way you want, press A to
return to the Timekeeping Mode.
x The DST indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
E-18
3. After the setting is the way you want, press A to return to the Timekeeping
Mode.
Note
x After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-17
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A until ADJ
appears.
x This indicates the city code setting mode.
x The hour and minute hands automatically move out of
the way at this time (page E-13).
2. Press D (East) and B (West) to select the city code
you want to use as your Home City.
x Keep pressing D or B until the city code you want
to select as your Home City appears on the display.
x For details about city codes, see the “City Code
Table” at the back of this manual.
City Code
E-16
To swap your Home City and World Time City
In the Timekeeping Mode, hold down D for about three seconds.
This swaps your Home City and World Time City.
Example: To swap the Home City (TYO) and World Time City (NYC)
Current Home City (TYO) time New Home City (NYC) time
Current Home City (TYO) information
Current World Time City
(NYC) time
New Home City (NYC) information
New World Time City
(TYO) time
New Home City
Hold down D
E-15
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
x Each press of A cycles the Home City information as
shown below.
Month-Day Day of the Week Seconds Hour : Minutes
A A A
PM indicator
A
Home City information
Home Time :
hour and minutes
World Time :
hour and minutes
E-14
2. Holding down B again as you press C will cause the hands to return to their
normal positions (normal timekeeping).
Note
x This operation can be performed in any mode. In the case of a setting mode
(setting fl ashing on the screen), the hands will move out of the way automatically,
even if you do not perform the above operation.
x Watch button functions are the same regardless of whether the hands are move
out of the way or at their normal positions.
x Changing to another mode will cause the hands to move back to their normal
positions.
x The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-13
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
1. While holding down B, press C.
x This will cause the hour and minute hands to move to a location where they do
not block your view of the World Time and/or digital display.
Modules 5382, 5465 Module 5508
Flashes while the hands are moved out of the way.
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
x Auto Return Features
The watch will automatically return to the Timekeeping Mode if you do not perform
any operation for a certain amount of time, as described below.
Mode Approximate Elapsed Time
Alarm
2 to 3 minutes
Time or other setting mode
(information fl ashing on the display)
x Scrolling
The B and D buttons are used on the setting mode to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-11

Stopwatch Mode Countdown Timer Mode Alarm Mode
E-10
Selecting a Mode
x Press C to cycle between the modes as shown below.
x To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
x In any mode (except a setting mode), press B to illuminate the display.

Timekeeping Mode World Time Mode
Home Time : hour and minutes
World Time : hour and minutes
Operation Guide 5382/5465/5508
E-29
Note
x The Stopwatch Mode can indicate elapsed time up to 59minutes, 59seconds.
x An ongoing elapsed time measurement operation will continue internally even if
you change to another mode. However, if you exit the Stopwatch Mode while a
split time is displayed, the split time will not be displayed when you return to the
Stopwatch Mode.
E-28
To perform an elapsed time operation
DD D D A
Start Stop Resume Stop Reset
To pause at a split time
DA A D A
Start Split
(SPL displayed)
Split release Stop Reset
To measure two fi nishes
DA D A A
Start Split
(SPL displayed)
First runner fi nishes.
Display time of fi rst
runner.
Stop
Second runner
nishes.
Split release
Display time of
second runner.
Reset
E-27
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use C to select the Stopwatch Mode as shown on page E-11.
Minutes Seconds
E-26
To specify standard time or daylight saving time (DST) for a city
In the World Time Mode, hold down A for about two
seconds.
x This toggles between Daylight Saving Time (DST
indicator displayed) and standard time (DST indicator
not displayed).
x Note that you cannot switch between standard time/
daylight saving time (DST) while UTC is selected as the
World Time City.
x The standard time/daylight saving time (DST) setting
affects only the currently displayed city. Other cities are
not affected.
DST indicator
E-25
To enter the World Time Mode
Use C to select the World Time Mode as shown on page E-10.
x The display changes as shown below.
Mode name
A
World Time City city code
and name will scroll.
World Time City
city code
x Press A to display the city code and name of the currently selected city.
To view the time in another time zone
Pressing D changes the city code setting.
x Each press of D advances to the next city code.
x To change the city code to UTC, press B and D at the same time.
E-24
Checking the Current Time in a Different Time Zone
You can view the current time in one of 31 time zones (48 cities) around the globe.
The city that is currently selected in the World Time Mode is called the “World Time
City”.
There are two World Time City settings: actually selecting the World Time City, and
selecting either standard time or daylight saving time (DST).
World Time City
Home Time : hour and minutes
World Time : hour and minutes PM indicator
E-23
Note
x Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week changes automatically when the date changes.
E-22
3. When the timekeeping setting you want to change is fl ashing, use D and/or B
to change it as described below.
Screen To do this: Do this:
Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping Press D.
Reset the seconds to 00 Press D.
Change the hour or minute Use D (+) and B (–).
Change the year Use D (+) and B (–).
Change the month or day Use D (+) and B (–).
4. Press A to exit the setting mode.
E-21
2. Press C to move the fl ashing in the sequence shown below to select the other
settings.
City Code
(page E-17)
CDST
(page E-19)
C
12/24-Hour Format
C
Seconds
C
CHour
C
Illumination Duration
(page E-36) Minutes
CC
Button Operation Tone On/Off
(page E-40) C
Day
C
Month
C
Year
E-20
Adjusting the Current Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
Changing the digital time should cause the analog time setting to change
accordingly.
To confi gure the digital time and date settings
1. In the Timekeeping Mode, hold down A until ADJ
appears.
x This indicates the city code setting mode.
x The hour and minute hands automatically move out of
the way at this time (page E-13).


Produktspezifikationen

Marke: Casio
Kategorie: betrachten
Modell: BGA-240

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio BGA-240 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Casio

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-