Casio Baby-G MSG-S200G-5AER Bedienungsanleitung

Casio betrachten Baby-G MSG-S200G-5AER

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio Baby-G MSG-S200G-5AER (8 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
Operation Guide 5576
E-9
Charging the Watch
The face of the watch is a solar panel that generates power from light. The generated
power charges a built-in rechargeable battery, which powers watch operations. The
watch charges whenever it is exposed to light.
Charging Guide
Whenever you are not
wearing the watch, leave it
in a location where it is
exposed to light.
• Best charging
performance is achieved
by exposing the watch to
the strongest light
available.
When wearing the watch,
make sure that its face is
not blocked from light by the
sleeve of your clothing.
• The watch may enter a
sleep state (page E-16) if its
face is blocked by your
sleeve even only partially.
E-8
Hand Home Position Adjustment …………………………………………………E-45
To adjust home positions ………………………………………………………E-45
Other Settings …………………………………………………………………………E-47
To enable or disable the button operation tone ……………………………E-47
To enable or disable Power Saving …………………………………………E-49
Troubleshooting ………………………………………………………………………E-50
Specifications …………………………………………………………………………E-53
Operating Precautions ………………………………………………………………E-55
User Maintenance ……………………………………………………………………E-66
E-7
Using the Stopwatch …………………………………………………………………E-38
To enter the Stopwatch Mode …………………………………………………E-38
To perform an elapsed time operation ………………………………………E-39
To measure split times …………………………………………………………E-39
To measure two finishes ………………………………………………………E-40
Using the Alarm ………………………………………………………………………E-41
To enter the Alarm Mode ………………………………………………………E-41
To set the alarm time ……………………………………………………………E-42
To turn the alarm on or off ……………………………………………………E-43
To stop a sounding alarm ………………………………………………………E-43
To turn the hourly time signal on or off ………………………………………E-43
Illumination ……………………………………………………………………………E-44
To turn on illumination …………………………………………………………E-44
E-6
Configuring Current Time and Date Settings ……………………………………E-27
To change the current time and date settings ………………………………E-27
Using the World Time Mode …………………………………………………………E-31
To enter the World Time Mode ………………………………………………E-31
To view the time in another city ………………………………………………E-32
To specify standard time or daylight saving time (DST) for a city …………E-32
To swap your Home Time and World Time Cities …………………………E-34
Using the Countdown Timer …………………………………………………………E-35
To enter the Countdown Timer Mode …………………………………………E-35
To specify the countdown start time …………………………………………E-35
To perform a countdown timer operation ……………………………………E-37
To stop the alarm ………………………………………………………………E-37
E-5
Contents
About This Manual …………………………………………………………………… E-1
Things to check before using the watch ………………………………………… E-2
Charging the Watch …………………………………………………………………… E-9
To recover from the sleep state ………………………………………………E-17
Mode Reference Guide ………………………………………………………………E-18
Timekeeping ……………………………………………………………………………E-23
Configuring Home City Settings ……………………………………………………E-24
To configure Home City settings ………………………………………………E-24
To change the Daylight Saving Time (summer time) setting ………………E-25
E-4
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To configure Home City settings” (page E-24) to configure your
Home City and daylight saving time settings.
Important!
• Proper World Time Mode data depend on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
3. Set the current time.
See “Configuring Current Time and Date Settings” (page E-27).
The watch is now ready for use.
E-3
Go to step 2.
The watch is charged.
For details about charging, see “Charging the Watch” (page E-9).
Power is low.
Charge the watch by placing it in a location where it is exposed to
light. For details, see “Charging the Watch” (page E-9).
NEXT
E-2
Is HI or
MID indicated as the battery power indicator (page E-12)?
Battery power indicator
YES
NO
Things to check before using the watch
1. Check the battery power level.
In the Timekeeping Mode, press C to display the battery power indicator.
E-1
About This Manual
• Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All examples in this
manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
MO1803-EA © 2018 CASIO COMPUTER CO., LTD.
Operation Guide 5576
E-19
To do this: Enter this mode: See:
Use the countdown timer Countdown Timer Mode E-35
Use the stopwatch to measure elapsed time Stopwatch Mode E-38
• Set an alarm time
• Turn an alarm or the hourly time signal ON or OFF Alarm Mode E-41
E-18
Mode Reference Guide
Your watch has six modes. The mode you should select depends on what you want to
do.
To do this: Enter this mode: See:
• View the current date in the Home City
• Configure Home City and daylight saving time (DST)
settings
• Configure time and date settings
• Switch between 12-hour and 24-hour timekeeping
Timekeeping Mode E-23
Check the battery power indicator Battery Mode E-11
View the current time in one of 48 cities (31 time zones)
around the globe World Time Mode E-31
E-17
• The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is
already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep
state.
• The watch will not enter a sleep state while it is in the Countdown Timer Mode or
Stopwatch Mode.
To recover from the sleep state
Move the watch to a well-lit area or press any button.
E-16
• For details about the operating time and daily operating conditions, see the “Power
Supply” (page E-54) section of the Specifications.
Power Saving
When enabled, Power Saving enters a sleep state automatically whenever the watch
is left for a certain period in an area where it is dark. The table below shows how
watch functions are affected by Power Saving.
• For information about enabling and disabling power saving, see “To enable or
disable Power Saving” (page E-49).
• There actually are two sleep state levels: “display sleep” and “function sleep”.
Elapsed Time in Dark Digital Displays Operation
60 to 70 minutes (display sleep) Blank All functions enabled, except for the
display
6 or 7 days (function sleep) Blank
• Beeper tone, illumination, and display
disabled
• Analog timekeeping stopped at
12 o’clock
E-15
Charging Times
Exposure Level
(Brightness)
Daily
Operation
*1
Level Change *2
Level 5 Level 4 Level 3 Level 2 Level 1
Outdoor sunlight
(50,000 lux) 8 min. 4 hours 38 hours 10 hours
Window sunlight
(10,000 lux) 30 min. 11 hours
142 hours
38 hours
Window sunlight on
cloudy day (5,000 lux) 48 min. 17 hours
230 hours
62 hours
Indoor fluorescent
lighting (500 lux) 8 hours 218 hours – – – – – –
*1 Approximate exposure each day to generate power for normal daily operation.
*2 Approximate exposure time (in hours) required to take power up one level.
• The above exposure times all are for reference only. Actual exposure times depend
on lighting conditions.
E-14
Recover Mode
• Performing illumination, or beeper operations during a
short period may cause (Recover) to appear on the
display.
After some time, battery power will recover and
(Recover) will disappear, indicating that the above
functions are enabled again.
• If (Recover) appears frequently, it probably means
that remaining battery power is low. Leave the watch in
bright light to allow it to charge.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Recover indicator
E-13
• The flashing charge alert at Level 3 and the flashing charge alert (
C) at Level
4 tell you that battery power is very low, and that exposure to bright light for
charging is required as soon as possible.
• At Level 5, all functions are disabled and settings return to their initial factory
defaults. Once the battery reaches Level 2 after falling to Level 5, reconfigure the
current time, date, and other settings.
• The watch’s Home City code setting will change automatically to
TYO (Tokyo)
whenever the battery drops to Level 5. If you are using the watch in North America
or Europe, or China you will need to change the Home City code setting to match
your location after the battery drops to Level 5.
• Display indicators reappear as soon as the battery is charged from Level 5 to Level
2.
• Leaving the watch exposed to direct sunlight or some other very strong light source
can cause the battery power indicator to show a reading temporarily that is higher
than the actual battery level. The correct battery level should be indicated after a
few minutes.
E-12
Level Battery Power Indicator Function Status
1
(HI) All functions enabled.
2
(MID) All functions enabled.
3
(LO)
*1
(Charge Alert)
LO flashes and functions below disabled.
• Display illumination.
• Sound (alarms, etc.)
• Non-Timekeeping Mode functions
4
(C)
*1
(Charge Alert)
Hands stopped at 12 o’clock. Only
C displayed.
5All functions, including timekeeping,disabled and
initialized.
*1 LO and C appear in the Timekeeping Mode to indicate the battery status.
E-11
Power Levels
In the Timekeeping Mode, press C to display the battery power indicator.
Battery power indicator
E-10
Warning!
Leaving the watch in bright light for charging can cause it to become quite hot.
Take care when handling the watch to avoid burn injury. The watch can become
particularly hot when exposed to the conditions below for long periods.
• On the dashboard of a car parked in direct sunlight
• Too close to an incandescent lamp
• Under direct sunlight
Important!
• Allowing the watch to become very hot can cause the digital display to black out.
The appearance of the LCD should become normal again when the watch returns
to a lower temperature.
• Enable the watch’s Power Saving function (page E-16) and keep it in an area normally
exposed to bright light when storing it for long periods. This helps to ensure that
power does not run down.
• Storing the watch for long periods in an area where there is no light or wearing it in
such a way that it is blocked from exposure to light can cause power to run down.
Expose the watch to bright light whenever possible.
Operation Guide 5576
E-29
3. When the timekeeping setting you want to change is flashing, use
D and/or B to
change it as described below.
Screen To do this: Do this:
Toggle between 12-hour (
12H) and 24-hour
(24H) timekeeping Press D.
Reset the seconds to 00
• 30 to 59 seconds: Adds 1 to minutes
Change the hour or minute
Use D (+) and B (–).
Change the year, month, or day
4. Press A to exit the setting screen.
• The watch automatically adjusts its analog setting to match the currently display
digital time.
E-28
2. Press C to move the flashing in the sequence shown below to select the other
settings.
City Code
(page E-24)
Power Saving
(page E-49)
DST
(page E-25) Seconds
Hour
Minute
YearMonthDay
Button Operation Tone On/Off
(page E-47)
12/24-Hour Format
C C C
C
C
C
CCC
C
C
• The following steps explain how to configure timekeeping settings only.
E-27
Configuring Current Time and Date Settings
To change the current time and date settings
1. In the Timekeeping Mode, hold down A for about two
seconds until is displayed.ADJ
• This will cause the currently selected city code to
flash.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
City code
E-26
3. Use D to switch between the DST settings in the sequence shown below.
DST off
(OFF)
DST on
(ON)
D
• Note that you cannot switch between standard time and daylight saving time
(DST) while UTC is selected as your Home City.
4. After the setting is the way you want, press
A to return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight Saving Time is turned on.
E-25
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time in
your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A for about two
seconds until is displayed.ADJ
• This will cause the currently selected city code to
flash.
2. Press C to enter the DST setting screen.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
E-24
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down A for about two
seconds until is displayed.ADJ
• This will cause the currently selected city code to
flash.
• For details about city codes, see the “City Code
Table” at the back of this manual.
2. Use D (East) and B (West) to scroll through the city
codes until the one you want to use as your Home City
is displayed.
3. After the setting is the way you want, press
A to return
to the Timekeeping Mode.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
City code
E-23
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
• Each press of A cycles the Home City information as
shown below.
Month Second P indicator
Day Hour : Minutes
Press A.Day of week
A
A
A
Hour
Minutes
Month Day
E-22
General Functions (All Modes)
Unless specifically noted otherwise, the information in this section is applicable to all
modes.
Auto Return
• The watch returns to the Timekeeping Mode automatically if you do not perform any
button operation for two or three minutes in the Alarm Mode.
• If you leave the watch with a setting screen (flashing digits) displayed for two or
three minutes without performing any operation, the watch will exit the setting
screen automatically.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Scrolling
The B
and D buttons are used in the setting screen to scroll through data. In most
cases, holding down these buttons during a scroll operation scrolls through the data at
high speed.
E-21
Stopwatch Mode Countdown Timer Mode
Alarm Mode
C
C
C
E-20
Selecting a Mode
• Press C to cycle between modes.
• In any mode (except when a setting screen is on the display), press B to illuminate
the face of the watch.
Press C.C C
Timekeeping Mode
World Time ModeBattery Level Indicator

Produktspezifikationen

Marke: Casio
Kategorie: betrachten
Modell: Baby-G MSG-S200G-5AER

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio Baby-G MSG-S200G-5AER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung betrachten Casio

Casio

Casio GW-3000BD-1AER Bedienungsanleitung

9 Oktober 2024
Casio

Casio Edifice EFA-112D-1AVEF Bedienungsanleitung

7 Oktober 2024
Casio

Casio Baby-G BGA-200-1E2ER Bedienungsanleitung

6 Oktober 2024
Casio

Casio MTP-1302D-7A1VEF Bedienungsanleitung

1 Oktober 2024
Casio

Casio Baby-G BG-5600WH-7ER Bedienungsanleitung

30 September 2024
Casio

Casio Edifice EF-316D-1AVEF Bedienungsanleitung

25 September 2024
Casio

Casio GW-A1100-1A3ER Bedienungsanleitung

23 September 2024
Casio

Casio G-Shock GMA-B800 Bedienungsanleitung

21 September 2024
Casio

Casio DW-5600E-1VER Bedienungsanleitung

20 September 2024
Casio

Casio LW-S200H-8AEF Bedienungsanleitung

16 September 2024

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-

Citizen

Citizen Cal 411X Bedienungsanleitung

7 Oktober 2024
Jaguar

Jaguar J627 Bedienungsanleitung

6 Oktober 2024
Citizen

Citizen CAL 4633 Bedienungsanleitung

5 Oktober 2024
Auriol

Auriol IAN 277495 Bedienungsanleitung

4 Oktober 2024
La Crosse Technology

La Crosse Technology WT-941 Bedienungsanleitung

4 Oktober 2024
Spin Master

Spin Master Dumas SP-5081-11 Bedienungsanleitung

4 Oktober 2024
Michael Kors

Michael Kors Kors Access Scout Hutton MKT4024 Bedienungsanleitung

3 Oktober 2024
Auriol

Auriol IAN 43022 Bedienungsanleitung

2 Oktober 2024
Michael Kors

Michael Kors Kors Access Sofie MKT5039 Bedienungsanleitung

2 Oktober 2024
Citizen

Citizen CAL 5513 Bedienungsanleitung

1 Oktober 2024