Casio Baby-G BLX-560VH-1ER Bedienungsanleitung

Casio Armbanduhr Baby-G BLX-560VH-1ER

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Casio Baby-G BLX-560VH-1ER (6 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war fĂĽr 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
Operation Guide 3296
MO1203-EB © 2012 CASIO COMPUTER CO., LTD.
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
E E-1
Warning!
•The measurement functions built into this watch are not intended for use in taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonably accurate representations only.
•The longitude, lunitidal interval, moon age and tide graph data that appear on the
display of this watch are not intended for navigation purposes. Always use proper
instruments and resources to obtain data for navigation purposes.
•This watch is not an instrument for calculating low tide and high tide times. The
tide graph of this watch is intended to provide a reasonable approximation of tidal
movements only.
E-2
About This Manual
•Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•Button operations are indicated using the letters shown
in the illustration.
•Each section of this manual provides you with the
information you need to perform operations in each
mode. Fur ther details and technical information can be
found in the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Tide/Moon Data ..................................................................................................... E-17
World Time ............................................................................................................. E-21
Stopwatch .............................................................................................................. E-23
Countdown Timer .................................................................................................. E-26
Alarms .................................................................................................................... E-32
Illumination ............................................................................................................E-39
Reference .............................................................................................................. E-41
Specifications ....................................................................................................... E-49
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To toggle between 12-hour and 24-hour timekeeping ....................................... E-12
To toggle the Timekeeping Mode time between DST and Standard Time ........ E-13
To configure Home Site data ............................................................................... E-15
To specify a date ................................................................................................... E-19
To view the time in another city ...........................................................................E-22
To toggle a city code time between Standard Time and
Daylight Saving Time ...................................................................................... E-22
To measure times with the stopwatch ................................................................ E-24
To use Auto-Start .................................................................................................. E-25
E-5
To configure the countdown timer ...................................................................... E-29
To use the countdown timer ................................................................................ E-31
To set an alarm time ............................................................................................. E-34
To test the alarm ................................................................................................... E-36
To turn an alarm on and off ..................................................................................E-37
To turn the Hourly Time Signal on and off .......................................................... E-38
To illuminate the display ...................................................................................... E-39
To specify the illumination duration ................................................................... E-40
To turn Flash Alert on and off ..............................................................................E-44
To turn the button operation tone on and off ..................................................... E-45
E-6
General Guide
•Press C to change from mode to mode.
•In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Press .C
Timekeeping Mode
â–˛
E-7
Stopwatch Mode
World Time ModeTide/Moon Data Mode
Countdown Timer ModeAlarm Mode
â–˛
â–˛
â–˛
â–˛
â–˛
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
•The tide graph (page E-42) shows tidal movements for
the current date in accordance with the current time as
kept in the Timekeeping Mode.
Important!
•Be sure to configure the current time and date, and your
Home Site data (data for the site where you use the
watch) correctly before using the functions of this watch.
See “Home Site Data” (page E-13) for more information.
Day of week
Month – Day
Tide graph
Hour : Minutes Seconds
PM indicator
E-9
Setting the Time and Date
This watch is preset with UTC differential values that represent each time zone
around the globe. Before setting the time, be sure to set the UTC differential for your
Home Site first, which is the location where you normally will be using the watch.
•Note that World Time Mode times (page E-21) are all displayed based on the time
and date settings you configure in the Timekeeping Mode.
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
•Be sure to configure the correct UTC differential for
your Home Site before configuring any other
Timekeeping Mode settings.
•See the “UTC Differential/City Code List” at the back
of this manual for information about the UTC
differential settings that are supported.
Seconds
Operation Guide 3296
E-10
2. Press C to move the flashing in the sequence shown below to select other
settings.
Hour
UTC
Differential Minutes
Ye a r
DST
Day Month
Seconds
Flash Alert
3. When the setting you want to change is flashing, use D B and to change it as
described below.
Reset the seconds to
Toggle between Daylight Saving
Time ( ) and Standard Time
( )
Press D.
Press D.
Screen To do this: Do this:
E-11
•See “Daylight Saving Time (DST) Setting” (page E-12) for details about the DST
setting.
• The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.
•When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in
0.5-hour units.
• For information about Flash Alert, see “Flash Alert” (page E-44).
4. Press A twice to exit the setting screen.
•The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Screen To do this: Do this:
Specify the UTC differential
Change the hour or minutes
Change the year, month or day
Use D (+) and B (–).
Use D (+) and B (–).
Use D (+) and B (–).
E-12
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
24-hour timekeeping.
•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-13
To toggle the Timekeeping Mode time between DST and Standard Time
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press once and the DST setting screen appears.C
3. Press D to toggle between Daylight Saving Time
( displayed) and Standard Time ( displayed).
4. Press A twice to exit the setting screen.
•The DST indicator appears on the Timekeeping, and
Tide/Moon Data screens to indicate that Daylight Saving
Time is turned on. In the case of the Tide/Moon Data
Mode, the DST indicator appears on the Tide Data
screen only.
Home Site Data
Moon age, tide graph data, and Tide/Moon Data Mode data will not be displayed
properly unless Home Site data (UTC differential, longitude and lunitidal interval) is
configured correctly.
DST indicator
On/Off status
E-14
•The lunitidal interval is the time elapsing between the Moon’s transit over a meridian
and the next high tide at that meridian. See “Lunitidal Interval” (page E-43) for more
information.
•This watch displays lunitidal intervals in terms of hours and minutes.
•The “Site/Lunitidal Interval Data List” at the back of this manual provides UTC
differential and longitude information around the world.
•The following is the initial factory default Home Site data (Tokyo, Japan) when you
first purchase the watch and whenever you have the battery replaced. Change these
settings to match the area where you normally use the watch.
UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,
20 minutes)
E-15
To configure Home Site data
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press twice to display the UTC differential settingC
screen, and confirm that the setting is correct.
•If the UTC differential setting is not correct, use D (+)
and B (–) to change it.
3. Press A to display the longitude value setting screen.
4. Press C to move the flashing in the sequence shown
below to select other settings.
Lunitidal Interval
Hours
Lunitidal Interval
Minutes
Longitude
(East/West)
Longitude
Value
Longitude value
Longitude (East/West)
E-16
5. While the setting you want to change is flashing, use D and B to change it as
described below.
Setting
Longitude Value
Longitude
(East/West)
Lunitidal Interval
Hours, Minutes
Button Operations
Use D B (+) and (–) to change the setting.
•You can specify a value from 0 , in° to 180°
1-degree units.
Use D to switch between east longitude ( )
and west longitude ( ).
Use D B (+) and (–) to change the setting.
Screen
6. Press A to exit the setting screen.
E-17
Tide/Moon Data
Tide/Moon data lets you view the moon age for a
particular date, and tidal movements for a particular date
and time for your Home Site.
•When you enter the Tide/Moon Data Mode, the data for
6:00 a.m. on the current date appears first.
•If you suspect that the Tide/Moon data is not correct for
some reason, check the Timekeeping Mode data
(current time, date, and Home Site settings), and make
changes as required.
•See “Tide Graph” (page E-42) for information about the
tide graph.
•All of the operations in this section are performed in the
Tide/Moon Data Mode, which you enter by pressing C
(page E-7).
Month – Day
Tide graph
Time
E-18
Tide/Moon Data Screens
In the Tide/Moon Data Mode, press to toggle between the Tide Data screen andA
the Moon Data screen.
Press .A
Moon Data ScreenTide Data Screen
â–˛
â–˛
Time Moon age
Tide graph
Month – Day
E-19
•While the Tide Data screen is displayed, press to advance to the next hour.D
•While the Moon Data screen is displayed, press D to advance to the next day.
•You also can specify a particular date (year, month, day) to view its tide data and
moon data. See “To specify a date” for more information.
•When you enter the Tide/Moon Data Mode, the screen (tide data or moon data) that
was displayed the last time you exited the mode appears first.
To specify a date
1. In the Tide/Moon Data Mode, hold down until theA
year setting starts to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Month DayYear
Month – DayYear
Operation Guide 3296
E-20
3. While a setting is flashing, use D (+) or B (–) to change it.
•You can specify a date in the range of January 1, 2000 to December 31, 2099.
4. Press A to exit the setting screen.
5. Use to display either the Tide Data screen or the Moon Data screen.A
E-21
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
•The times kept in the World Time Mode are
synchronized with the time being kept in the
Timekeeping Mode. If you feel that there is an error in
any World Time Mode time, check the UTC differential of
your Home Site Data (Home City) and the current
setting of the Timekeeping Mode time.
•Select a city code in the World Time Mode to display the
current time in any particular time zone around the
globe. See the “UTC Differential/City Code List” at the
back of this manual for information about the UTC
differential settings that are supported.
•All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C
(page E-7).
City code
Current time in
selected city
E-22
To view the time in another city
While in the World Time Mode, press (eastward) to scroll through the city codesD
(time zones).
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D to display the city code
(time zone) whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down A to toggle between Daylight Saving Time
(DST indicator displayed) and Standard Time (DST
indicator not displayed).
•The DST indicator is shown on the World Time Mode
screen while Daylight Saving Time is turned on.
•Note that the DST/Standard Time setting affects only the
currently displayed city code. Other city codes are not
affected.
DST indicator
E-23
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two finishes. It also includes Auto-Start.
•The display range of the stopwatch is 23 hours, 59
minutes, 59.99 seconds.
•The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
•The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
•Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
•All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C (page
E-7).
1/100 second
Hours
Minutes
Seconds
E-24
To measure times with the stopwatch
D
Start Stop
Elapsed Time
➤
Re-start Clear
D➤
Stop
D➤D➤A
Split Time
D
Start Split
➤
Split release Clear
A➤
Stop
A➤D➤A
Two Finishes
D
Split
➤
Stop Clear
A➤
Split release
D➤A➤A
First runner
finishes.
Display time of
first runner.
Second runner
finishes.
Display time of
second runner.
(SPL displayed)
Start
E-25
About Auto-Start
With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation
starts automatically when the countdown reaches zero.
During the final three seconds of the countdown, a beeper sounds with each second.
To use Auto-Start
1. While the stopwatch screen is showing all zeros in the
Stopwatch Mode, press A.
•This displays a 5-second countdown screen.
•To return to the all zeros screen, press A again.
2. Press D to start the countdown.
•When the countdown reaches zero, a tone sounds and a
stopwatch timing operation starts automatically.
•Pressing D while the Auto-Start countdown is in
progress will start the stopwatch immediately.
E-26
Countdown Timer
You can set the countdown timer within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero. The countdown timer also has an
auto
-
repeat feature and a progress beeper that signals
the progress of the countdown.
•All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
Configuring the Countdown Timer
The following are the settings you should configure before
actually using the countdown timer.
Countdown start time; Auto-repeat on/off; Progress
beeper on/off
•See “To configure the countdown timer” (page E-29) for
information about setting up the timer.
Hours
Minutes
Seconds
E-27
Auto-repeat
When auto-repeat is turned on, the countdown restarts automatically from the
countdown start time when it reaches zero.
When auto-repeat is turned off, the countdown stops when it reaches zero and the
display shows the original countdown start time.
•Pressing D while an auto-repeat countdown is in progress pauses the current
countdown. You can resume the auto-repeat countdown by pressing , or you canD
press A to reset to the countdown time starting value.
Countdown Timer Beeper Operations
The watch beeps at various times during a countdown so you can keep informed
about the countdown status without looking at the display. The following describes the
types of beeper operations the watch performs during a countdown.
E-28
Countdown End Beeper
The countdown end beeper lets you know when the countdown reaches zero.
•When the progress beeper is turned off, the countdown end beeper sounds for
about 10 seconds, or until you press any button to stop it.
•When the progress beeper is turned on, the countdown end beeper sounds for
about one second.
Progress Beeper
When the progress beeper is turned on, the watch uses beeps to signal countdown
progress as described below.
•Starting from five minutes before the end of the countdown, the watch emits four
short beeps at the top of each countdown minute.
•30 seconds before the end of the countdown, the watch emits four short beeps.
•The watch emits a short beep for each of the last 10 seconds of the countdown.
•If the countdown start time is six minutes or greater, the watch emits a short beep for
each second of the final 10 seconds before the five-minute point is reached. Four
short beeps are emitted to signal when the five-minute point is reached.
E-29
To configure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to flash, which indicates the
setting screen.
•If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-31) to display it.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Progress Beeper Auto-repeat
Hours Minutes

Produktspezifikationen

Marke: Casio
Kategorie: Armbanduhr
Modell: Baby-G BLX-560VH-1ER

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio Baby-G BLX-560VH-1ER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Armbanduhr Casio

Casio

Casio Vintage A100WEL-1A Bedienungsanleitung

25 Juni 2024
Casio

Casio Vintage A158WA-1J Bedienungsanleitung

25 Juni 2024
Casio

Casio Vintage A100WEF Bedienungsanleitung

25 Juni 2024
Casio

Casio Vintage A159WA-N1 Bedienungsanleitung

25 Juni 2024
Casio

Casio Vintage A120WE-1A Bedienungsanleitung

25 Juni 2024
Casio

Casio Vintage A158WEA-9 Bedienungsanleitung

25 Juni 2024
Casio

Casio Vintage A100WEPC-1B Bedienungsanleitung

25 Juni 2024
Casio

Casio Edifice EFB-508 Bedienungsanleitung

20 Juni 2024
Casio

Casio vEdifice EFV-C110 Bedienungsanleitung

2 Juni 2024
Casio

Casio G-Shock GMA-S130 Bedienungsanleitung

2 Juni 2024

Bedienungsanleitung Armbanduhr

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Zenith

Zenith Defy El Primero 21 18.9000.9004/71.R585 Bedienungsanleitung

19 August 2024
Zenith

Zenith Elite Classic 03.2290.679/51.C700 Bedienungsanleitung

19 August 2024
Invicta

Invicta Character Collection 24492 Bedienungsanleitung

16 August 2024
Lorus

Lorus Sports RRX43FX9 Bedienungsanleitung

12 August 2024
Invicta

Invicta Objet D Art 27572 Bedienungsanleitung

10 August 2024
Invicta

Invicta Objet D Art 27560 Bedienungsanleitung

9 August 2024
Digi-tech

Digi-tech 1-LD2580 Bedienungsanleitung

11 Juni 2024
Digi-tech

Digi-tech 1-LD2550 Bedienungsanleitung

11 Juni 2024
Digi-tech

Digi-tech 1-LD2339 Bedienungsanleitung

11 Juni 2024
Digi-tech

Digi-tech 1-LD2900 Bedienungsanleitung

11 Juni 2024