Casio Baby-G BGS-100SC-4AER Bedienungsanleitung

Casio Armbanduhr Baby-G BGS-100SC-4AER

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Casio Baby-G BGS-100SC-4AER (9 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war fĂĽr 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
Operation Guide 5520
E-9
Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-69
To illuminate the face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-69
To change the illumination duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-69
Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-71
To adjust hand alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-72
Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-74
To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-74
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-75
Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-78
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-79
Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-83
E-8
To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-60
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-60
Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-61
To enter the Alarm Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-61
To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-61
To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-62
To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-63
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-64
Dual Time Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-65
To enter the Dual Time Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-65
To set the Dual Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-65
To swap Timekeeping Mode and Dual Time Mode times . . . . . . . . . . . . . . . . E-67
E-7
To specify a daily step goal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-33
To check your step count history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36
To reset the daily step goal attainment day count . . . . . . . . . . . . . . . . . . . . . . E-48
To turn Step Reminder on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-50
To clear the flashing “ ” notification . . . . . . . . . . . . . . . . . . . . . . . . . . . E-51STEP!!
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-52
To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-53
To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-53
To perform lap time measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-54
To recall lap data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-56
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-58
To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-58
To configure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-59
E-6
Contents
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3
Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-11
Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17
Adjusting the Digital Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . . .E-18
To configure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-18
To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-22
Pedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-23
To check step count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To reset today’s step count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31
E-5
â—† Stopwatch ..................... Page E-52
Use the stopwatch to measure elapsed
times and lap times. Memory for up to
30 lap time records.
â—† Timer .............................. Page E-58
The timer counts down from a preset
start time. An alarm sounds when the
end of the countdown is reached.
â—† Alarm .............................. Page E-61
When the alarm time is reached, the
watch sounds an alert.
â—† Dual time ....................... Page E-65
You can view the current time in your
current location and in one more time
zone.
E-4
â—† Step count data storage
........................................ Page E-35
x Today’s and past seven day’s daily
data
x This week’s and past three week’s
weekly data
x Count of the days you attained your
daily step count goal (GOAL)
â—† Step count attainment
notification
........................................ Page E-35
A GOAL indicator flashes when you
attain your daily step goal. Your step
goal progress is also displayed (Step
goal progress).
E-3
Features
Your watch provides you with the features and functions described below.
â—† Pedometer .................... Page E-23
Count the steps you
take.
â—† Over-sitting prevention
........................................ Page E-49
A Step Reminder displays an indicator
and sounds an alert whenever the
watch determines that you have not
walked for a specific amount of time.
This helps to ensure that you are
getting enough exercise on a regular
basis.
E-2
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of your
watch or its malfunction.
MA1705-EB © 2017 CASIO COMPUTER CO., LTD.
Operation Guide 5520
E-19
2. Press to move the flashing in the sequence shown below to select the other C
settings.
Seconds
CDST
(page E-22)
C
12/24-Hour Format
C
Hour
C C
Illumination Duration
(page E-69) Minutes
C C
Button Operation Tone On/Off
(page E-74) CDay CMonth CYear
E-18
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
To configure the digital time and date settings
1. In the Timekeeping Mode, hold down until the A
seconds digits start to flash (about two seconds).
x This enables setting of the seconds.
E-17
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
x Each press of A cycles the digital display contents as
shown below.
Date, day of
the week
Date, step count
graph Steps
Hour, minute,
second
AAA
PM indicator
A
Hour
Minutes
Day of the week
Month-Day
Seconds
E-16
2. Holding down again as you press will cause the hands to return to their B C
normal positions (normal timekeeping).
Note
x This operation can be performed in any mode. In the case of a setting mode
(setting flashing on the screen), the hour and minute hands will move out of the
way, and the second hand will move to 12 o’clock automatically even if you do not
perform the above operation.
x Watch button functions are the same regardless of whether the hands are move
out of the way or at their normal positions.
x Changing to another mode will cause the hands to move back to their normal
positions.
x The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-15
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
1. While holding down , press B C.
x The watch will beep twice and the hour and minute hands will move to a position
where they do not block the digital display.
Example: When the current time is 8:25
Flashes while the hands are
moved out of the way.
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
x Auto Return Features
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
The watch will automatically return to the Timekeeping Mode if you do not perform
any operation for a certain amount of time, as described below.
Mode Approximate Elapsed Time
Alarm 3 minutes
Step count history screen 2 minutes
x Scrolling
The and buttons are used on the setting mode to scroll through data on the B D
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-13
Countdown Timer Mode Alarm Mode Dual Time Mode
C
C C
E-12
Selecting a Mode
x Press C to cycle between the modes as shown below.
x To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
x In any mode (except a setting mode), press to illuminate the display.B
Timekeeping Mode Stopwatch Mode
C C
E-11
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
x View the current time and date
x Configure daylight saving time (DST) settings
x Configure time and date settings
x Record or view your step count with the pedometer
x Daily step goal and step reminder settings
Timekeeping Mode E-17
E-23
x Measure elapsed time
x Record lap times (up to 30) Stopwatch Mode E-52
Use the countdown timer Countdown Timer Mode E-58
x Set an alarm time
x To turn an alarm or the hourly time signal on or off Alarm Mode E-61
xDisplay a second time
xConfigure settings for a second time Dual Time Mode E-65
E-10
User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-94
Operation Guide 5520
E-29
STEPS mark
A
Step count Hour, minute, second
A
E-28
Checking Step Count
To check step count
1. In the Timekeeping Mode, use to cycle through step count information as A
shown below.
A A
Timekeeping Mode
Date, day of the Week
Date, step count graph
E-27
x While you are walking, the step indicators alternately flash on the display at
one-second intervals. Both step indicators are displayed without flashing while you
are not moving, and both indicators are cleared from the display while the sensor is
stopped, in order to conserve battery power.
Step indicators
E-26
Pedometer Details
Step Count
x The step counter can count from 0 to 999,999 steps. If the step count exceeds
999,999, the maximum value (999,999) remains on the display.
x The step count is not displayed at the beginning of a walk in order to avoid
miscounting of non-walking movements. It appears only after you have continued
walking for about 10 seconds, with the number of steps you took during that time
added to the total.
x The step count is automatically reset to zero at midnight each day.
x You can also manually reset the daily step count that is displayed in the
Timekeeping Mode. Note that doing so does not reset the daily step count on the
history screen. This makes the displayed step count zero and counts steps from
there. This comes in handy when you want to count the number of steps between
twopoints. See “To reset today’s step count” (page E-31).
E-25
x Normal daily non-walking activities (cleaning, etc.)
x Wearing the watch on your dominant hand
x Walking for less than 10 seconds
x Watch hand movement (by the hand shift function, etc.)
Power Saving
To save power, sensor operation stops automatically if there is no movement
detected by the watch and you do not perform any operation for two to three
minutes.
E-24
Important!
x If the band is loose, the pedometer will count steps, but step count accuracy may
be reduced.
If you are experiencing problems getting relatively accurate step counts
Any of the conditions below may make proper measurement impossible.
x Wearing slippers, sandals, or other footwear that encourages a shuffling gait
x Walking on tile, carpeting, snow, or other surface that causes a shuffling gait
x Irregular walking (in a crowded location, in a line where walking stops and starts at
short intervals, etc.)
x Extremely slow walking or extremely fast running
x Pushing a shopping cart or baby stroller
x In a location where there is a lot of vibration, or riding in a car or other vehicle
x Frequent movement of the hand or arm (clapping, fanning movement, etc.)
x Walking while holding hands, walking with a cane or stick, or engaging in any other
movement in which your hand and leg movements are not coordinated with each
other.
E-23
Pedometer
The watch has a built-in 3-axis accelerometer that counts the steps you take.
You can specify a daily step goal and keep track of your step goal progress.
A Step Reminder function helps to keep you from sitting too much.
Pedometer Precautions
While the watch is on your wrist, the pedometer may detect non-step movements
and count them as steps. Also, abnormal arm movements while walking may
cause a miss count of steps.
Wearing the Watch
OK NG To ensure proper step count measurement,
wear the watch as shown in the illustration
nearby.
Wear the watch on your wrist, with the band
tightened securely.
E-22
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down until the A
seconds digits start to flash (about two seconds).
x This enables setting of the seconds.
2. Press to display the DST setting mode.C
3. Press to toggle between Daylight Saving Time (DON)
and Standard Time ( ).OFF
4. After the setting is the way you want, press to A
return to the Timekeeping Mode.
x The indicator appears to indicate that DaylightDST
Saving Time is turned on.
Note
x Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
DST indicator
E-21
Note
x Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week changes automatically when the date changes.
x While the 12-hour format is selected for timekeeping, a (PM) indicator will appearP
for times from noon to 11:59 p.m. No indicator appears for times from midnight to
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any
P (PM) indicator.
E-20
3. When the timekeeping setting you want to change is flashing, use and/or D B
to change it as described below.
Screen To do this: Do this:
Reset the seconds to 00 Press D.
Toggle between 12-hour ( ) and 24-hour 12H
(24H) timekeeping Press D.
Change the hour or minute Use (+) and (–).D B
Change the year Use (+) and (–).D B
Change the month or day Use (+) and (–).D B
4. Press to exit the setting mode.A


Produktspezifikationen

Marke: Casio
Kategorie: Armbanduhr
Modell: Baby-G BGS-100SC-4AER

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio Baby-G BGS-100SC-4AER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Armbanduhr Casio

Bedienungsanleitung Armbanduhr

Neueste Bedienungsanleitung fĂĽr -Kategorien-