Casio Baby-G BGS-100-4AER Bedienungsanleitung
Casio
Armbanduhr
Baby-G BGS-100-4AER
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio Baby-G BGS-100-4AER (6 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
Operation Guide 5510
E-9
To set the digital time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Seconds
Day
DST Hour
Month
Minutes
Year
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Seconds
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date. This watch features separate digital and
analog timekeeping. The procedures for setting the digital
time (page E-9) and analog time (page E-13) are different.
Setting the Digital Time and Date
Use the Timekeeping Mode to set and view a digital
display of the current time and date. When setting the
digital time, you also can configure settings for the
summer time (Daylight Saving Time or DST).
PM indicator
Minutes
Seconds
Month – Day
Day of week
Hours
E-7
Recall Mode
Dual Time Mode
Countdown Timer
Mode
Alarm Mode
C
C
C
E-6
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press
B to illuminate
the face of the watch.
Stopwatch Mode
C
C
Hand Setting Mode
Timekeeping Mode C
C
E-5
Illumination ……………………………………………………………………………E-41
To illuminate the display manually ……………………………………………E-41
To specify the illumination duration……………………………………………E-42
To turn the auto light switch on and off ………………………………………E-44
Reference ………………………………………………………………………………E-45
To turn the button operation tone on and off …………………………………E-46
Specifications …………………………………………………………………………E-51
E-4
Recall Mode ……………………………………………………………………………E-24
To recall stopwatch time records………………………………………………E-25
To delete a log …………………………………………………………………E-27
Countdown Timer………………………………………………………………………E-28
To use the countdown timer ……………………………………………………E-29
To configure countdown start time and auto-repeat settings ………………E-30
Alarms ……………………………………………………………………………………E-32
To set an alarm time ……………………………………………………………E-34
To test the alarm ………………………………………………………………E-36
To select the operation of Alarm ……………………………………………E-37
To turn Alarms and on and off ……………………………………………E-38
To turn the hourly time signal on and off ……………………………………E-38
Dual Time ………………………………………………………………………………E-39
To set the Dual Time ……………………………………………………………E-39
E-3
Contents
General Guide ………………………………………………………………………… E-6
Timekeeping …………………………………………………………………………… E-8
To set the digital time and date ……………………………………………… E-9
To toggle between 12-hour and 24-hour timekeeping ………………………E-11
To toggle the Timekeeping Mode digital time between DST and
Standard Time ………………………………………………………………E-12
To adjust the analog time ………………………………………………………E-13
Stopwatch ………………………………………………………………………………E-15
To measure elapsed time ………………………………………………………E-18
To measure elapsed time with lap times ……………………………………E-19
To measure elapsed time with split times ……………………………………E-20
E-2
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-1
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
MO1612-EA © 2016 CASIO COMPUTER CO., LTD.
Operation Guide 5510
E-19
To measure elapsed time with lap times
1. When the stopwatch display shows all zeros, press
A to display the lap time screen (indicated by /LAP).
2. Press D to start an elapsed time measurement.
• At the time, both the upper and lower displays will
show identical times.
3. Press A to record the time of the first lap.
• This freezes the current lap time in the upper part of
the digital display for about eight seconds, while
measurement of total elapsed time and the next lap
time continue internally. The lap number of the
displayed time appears in the lower digital display.
• After eight seconds, the ongoing elapsed time
measurement re-appears in the lower digital display.
4. Repeat step 3 to record more lap times.
5. Press D to stop the stopwatch.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Lap time
Elapsed time
E-18
More than 10 hours
More than one hour
Minutes
Seconds
1/100 second Hours
Minutes
Seconds
Minutes
Hours
Seconds
1/100 second Hours
Minutes
Seconds
To measure elapsed time
Note
• You can perform the following steps starting from either the lap time screen or the
split time screen.
1. Press D to start the stopwatch.
2. Press D again to stop the stopwatch.
• You can resume the measurement operation by pressing D
.
3. Press A to clear the stopwatch to all zeros.
E-17
• See “To measure elapsed time with lap times” (page E-19) and “To measure elapsed
time with split times” (page E-20) for more information about each type of measurement.
• You can perform elapsed time measurement starting from either the lap time screen
or the split time screen (page E-19 and E-20). Whenever you enter the Stopwatch Mode,
the screen (lap time or split time) that was displayed when you last exited the mode
will appear first.
• During a stopwatch elapsed time operation, the upper display initially shows
minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and
seconds when the time in the upper display exceeds 60 minutes.
• The lower display initially shows hours, minutes, seconds, and a 1/100-second
value. This changes to hours, minutes, and seconds when the time in the lower
display exceeds 10 hours.
E-16
• The stopwatch measurement operation continues even if you exit the Stopwatch
Mode.
• For information about how stopwatch times are stored in memory, see “Memory
Management” (page E-22).
Viewing the Stopwatch Digital Displays
The information that appears in the watch’s upper and lower digital displays depends
on whether you are measuring lap times or split times.
Lap Time Measurement
Upper Display: Lap time
Lower Display: Elapsed time
Split Time Measurement
Upper Display: Lap time
Lower Display: Elapsed time (Split time appears here for eight seconds as it is stored
in memory.)
E-15
Stopwatch
The stopwatch lets you measure elapsed time, lap times,
and split times. Lap times and split times can be stored in
memory.
• The display range of the stopwatch is 99 hours,
59 minutes, 59 seconds.
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing
C
(page E-6).
Note
• “Lap time” is the time spent to cover a specific segment
of a race, such as one lap around a track. “Split time” is
the time spent from the beginning of a race up to a
certain point.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
Minutes
Seconds
1/100
second
Hours
Remaining
free records
E-14
• High-speed hand movement will stop automatically after the time advances 12
hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper) starts
to sound.
4. Press A to exit the setting screen.
• The minute hand will be adjusted slightly to match the seconds when you exit the
setting screen.
• To return to the Timekeeping Mode, press
C.
E-13
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.
To adjust the analog time
1. In the Timekeeping Mode, press C six times to enter
the Hand Setting Mode (page E-6).
2. Hold down A until the current digital time starts to
flash, which indicates the setting screen.
3. Use D to adjust the analog setting.
• Press D once to advance the hands 20 seconds.
• Hold down D to advance the hands at high speed.
• To lock high speed hands movement, hold down D to start it and then press B
to lock. The hands will continue to advance for one 12-hour cycle or until you
press any button to stop them.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-12
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (
displayed) and Standard Time ( displayed).
4. Press A to exit the setting screen.
• The DST
indicator appears on the Timekeeping,
Alarm, and Hand Setting Mode screens to indicate
that Daylight Saving Time is turned on.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
On/Off status
DST indicator
E-11
4. Press A to exit the setting screen.
• The day of the week is displayed automatically in accordance with the date
(year, month, and day) settings.
• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
24-hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits
for times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the
left of the hour digits for times in the range of midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
• The A and P indicators are not displayed with the Timekeeping Mode time on the
Countdown Timer Mode and Dual Time Mode screens.
E-10
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen: To do this: Do this:
Reset the seconds to Press D.
Toggle between Daylight Saving Time
( ) and Standard Time ( ) Press D.
Change the hour or minute Use
D (+) and B (–).
Change the year, month, or day Use
D (+) and B (–).
Operation Guide 5510
E-29
To use the countdown timer
Press D while in the Countdown Timer Mode to start the countdown timer.
• When the end of the countdown is reached and auto-repeat is turned off, the alarm
sounds for 10 seconds or until you stop it by pressing any button. The countdown
time is reset automatically to its starting value after the alarm stops.
• When auto-repeat is turned on, the countdown will restart automatically without
pausing when it reaches zero. The alarm sounds when the countdown reaches
zero.
• The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
• Press D while a countdown operation is in progress to pause it. Press D again to
resume the countdown.
• To stop a countdown operation completely, first pause it (by pressing D), and then
press A. This returns the countdown time to its starting value.
E-28
Countdown Timer
You can set the countdown timer within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero.
• You also can select auto-repeat, which automatically
restarts the countdown from the original value you set
whenever zero is reached.
• All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
Seconds
Hours
Minutes
Timekeeping Mode time
Auto-repeat
on indicator
E-27
To delete a log
1. In the Recall Mode, display the title screen of the log you want to delete.
2. Hold down B and D until stops flashing on the display.
• This deletes the log and all the records inside it.
• Deleting a single log slides all newer logs (ones with higher log numbers)
upwards to fill the empty space. This cause the log numbers of all the newer logs
to be reduced by 1. If there are six logs currently in memory (numbered 01
through ) and you delete log , the numbers of logs that previously were 06 03
numbered , , and will change to , , and .04 05 06 03 04 05
E-26
Press D.
Lap number
Split number
Log number
Log Title Screen
First record Last record
Lap time
Split time
• Whether you will be able to view lap time records or split time records will depend
on the screen you selected in step 2, above.
E-25
To recall stopwatch time records
1. In the Stopwatch Mode, check to make sure that the displays are reset to all zeros
(page E-19).
• If all zeros are not displayed, reset the stopwatch.
2. Use the A button to select either the lap time screen (to view lap time records) or
the split time screen (to view split time records) (page E-19 and E-20).
• To convert a lap time saved in the Stopwatch Mode to a split time, select the split
time screen.
3. Press the C button to enter the Recall Mode.
4. Use the A button to scroll through the log title screens from the newest to the
oldest until the title screen of the log whose records you want to view is displayed.
5. Press D to scroll through the records contained in the log you selected in step 4,
from the oldest to the newest.
E-24
Recall Mode
Use the Recall Mode to recall and delete logs and records
you stored in the Stopwatch Mode. You can use the
Recall Mode to view both lap and split time records.
• When you enter the Recall Mode, the newest log
recorded in the Stopwatch Mode will appear first. If
there are no logs in memory, appears on the
display.
• You can use the Recall Mode to check memory data
even while a stopwatch elapsed time measurement
operation is in progress. However, the time data that is
currently being measured will not appear in the Recall
Mode.
• You can convert a lap time saved in the Stopwatch
Mode to a split time (page E-25).
Day of week
Month – Day
Log number
Log Title Screen
E-23
How stopwatch data is stored
The following table shows how stopwatch data is stored when you perform stopwatch
button operations.
Stopwatch Button Operation Data Storage Description
From all-zeros, press D to start. Creates a new log. Stores the date the button was
pressed, and the new log number.
Press A to display lap/split time.
Creates a new record with each button operation. Stores
the lap and split times and total elapsed time at each
point the button is pressed.
Press D to stop elapsed time
measurrement and then press
A
to reset.
Resets the elapsed time to all zeros without recording
data.
• See “Recall Mode” (page E-24) for details on how to recall time records from memory.
E-22
Memory Management
A new log is created each time you press D in the Stopwatch Mode to start a new
elapsed time measurement operation. A log contains a log title screen, and records of
all the lap or split times you record during the current elapsed time measurement
operation.
• The capacity of the watch’s memory is 60 records.
• If you are adding records to the only log in memory and watch memory becomes
full, adding another record causes the oldest record in the log to be deleted
automatically to make room for the new record.
• If you are adding records to a log when there are multiple logs in memory and
watch memory becomes full, adding another record causes the oldest log in
memory and all of its records to be deleted automatically to make room for new
records.
E-21
3. Press A to record the time of the first split.
• The current split time appears in the lower display for
about eight seconds, as the total elapsed time, next
lap time, and next split time continue to be timed
internally by the watch. The split number of the
displayed time appears in the upper display.
• After eight seconds, the ongoing lap time
measurement appears in the upper display and the
ongoing elapsed time measurement appears in the
lower display.
4. Repeat step 3 to record more split times.
5. Press D to stop the stopwatch.
6. Press A to clear the stopwatch to all zeros.
• Split numbers are incremented automatically starting from whenever you press 1
A in step 3 of the above procedure. The maximum split number is . 99
Recording a split time after that causes the split number count to restart from .00
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
ll
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Split time
Split number
Split Time Recording
(Displayed for eight
seconds after
A is pressed.)
E-20
6. Press A to clear the stopwatch to all zeros.
• Lap numbers are incremented automatically starting
from 1 whenever you press A in step 3 of the above
procedure. The maximum lap number is
99.
Recording a lap after that causes the lap number
count to restart from 00.
To measure elapsed time with split times
1. When the stopwatch display shows all zeros, press A
to display the split time screen (indicated by /SPL).
2. Press D to start an elapsed time measurement.
• At the time, both the upper and lower displays will
show identical times.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Lap time
Lap number
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
ll
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Lap time
Elapsed time
Produktspezifikationen
| Marke: | Casio |
| Kategorie: | Armbanduhr |
| Modell: | Baby-G BGS-100-4AER |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Casio Baby-G BGS-100-4AER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Armbanduhr Casio
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
20 Juni 2024
2 Juni 2024
2 Juni 2024
Bedienungsanleitung Armbanduhr
- Armbanduhr Crivit
- Armbanduhr Nedis
- Armbanduhr Beper
- Armbanduhr Velleman
- Armbanduhr IKEA
- Armbanduhr ADE
- Armbanduhr Auriol
- Armbanduhr Denver
- Armbanduhr Eurochron
- Armbanduhr Irox
- Armbanduhr Prologue
- Armbanduhr Renkforce
- Armbanduhr Sempre
- Armbanduhr Braun
- Armbanduhr Polar
- Armbanduhr Alpina
- Armbanduhr Topcom
- Armbanduhr Geemarc
- Armbanduhr Seiko
- Armbanduhr Calypso
- Armbanduhr Fossil
- Armbanduhr Garmin
- Armbanduhr Jaguar
- Armbanduhr Lotus
- Armbanduhr Michael Kors
- Armbanduhr Skagen
- Armbanduhr Withings
- Armbanduhr Citizen
- Armbanduhr Dugena
- Armbanduhr Habitat
- Armbanduhr Karlsson
- Armbanduhr Krontaler
- Armbanduhr Leff
- Armbanduhr Mondaine
- Armbanduhr Epson
- Armbanduhr Suunto
- Armbanduhr Guardo
- Armbanduhr Swatch
- Armbanduhr Tissot
- Armbanduhr Adidas
- Armbanduhr Lorus
- Armbanduhr Maurice Lacroix
- Armbanduhr Huawei
- Armbanduhr Omega
- Armbanduhr Kogan
- Armbanduhr TomTom
- Armbanduhr Grand Seiko
- Armbanduhr Fitbit
- Armbanduhr Armani
- Armbanduhr Bering
- Armbanduhr Breitling
- Armbanduhr Breo
- Armbanduhr Bulova
- Armbanduhr Christiaan Van Der Klaauw
- Armbanduhr Cover
- Armbanduhr Daniel Steiger
- Armbanduhr Davis
- Armbanduhr Detomaso
- Armbanduhr Diesel
- Armbanduhr Ebel
- Armbanduhr Festina
- Armbanduhr Gant
- Armbanduhr Girard-Perregaux
- Armbanduhr Guess
- Armbanduhr Hamilton
- Armbanduhr Holzkern
- Armbanduhr Hugo Boss
- Armbanduhr Ice Watch
- Armbanduhr Invicta
- Armbanduhr IWC
- Armbanduhr Junghans
- Armbanduhr KHS
- Armbanduhr Lexor
- Armbanduhr Nixon
- Armbanduhr Orient
- Armbanduhr Pulsar
- Armbanduhr Puma
- Armbanduhr Sinn
- Armbanduhr Stührling
- Armbanduhr Swiss Military Hanowa
- Armbanduhr Swiza
- Armbanduhr Timex
- Armbanduhr Torgoen
- Armbanduhr Tudor
- Armbanduhr TW Steel
- Armbanduhr Zenith
- Armbanduhr Victorinox
- Armbanduhr ETT
- Armbanduhr Boss
- Armbanduhr La Crosse Technology
- Armbanduhr Oregon Scientific
- Armbanduhr Spin Master
- Armbanduhr TicWatch
- Armbanduhr Digi-tech
- Armbanduhr Ferrari
- Armbanduhr Lambretta
- Armbanduhr Misfit
- Armbanduhr Movado
- Armbanduhr Rolex
- Armbanduhr Sigma Sport
- Armbanduhr Skmei
- Armbanduhr Tommy Hilfiger
- Armbanduhr Shinola
- Armbanduhr Sekonda
- Armbanduhr Emporio Armani
- Armbanduhr Philip Watch
- Armbanduhr Brera
- Armbanduhr Earnshaw
- Armbanduhr So & Co
- Armbanduhr Stauer
- Armbanduhr LIV
- Armbanduhr Fromanteel
- Armbanduhr Triwa
- Armbanduhr Nautica
- Armbanduhr Obaku
- Armbanduhr Hublot
- Armbanduhr Linjer
- Armbanduhr X-WATCH
- Armbanduhr Tikkers
- Armbanduhr Audemars Piguet
- Armbanduhr Pilgrim
- Armbanduhr MICHELE
- Armbanduhr WoodWatch
- Armbanduhr Rotary
Neueste Bedienungsanleitung für -Kategorien-
Zenith Elite Classic 03.2290.679/51.C700 Bedienungsanleitung
19 August 2024
16 August 2024
12 August 2024
10 August 2024
9 August 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024