Casio Baby-G BGD-525-7ER Bedienungsanleitung
Casio
betrachten
Baby-G BGD-525-7ER
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio Baby-G BGD-525-7ER (6 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
Operation Guide 3290
E-9
4. Press to exit the setting screen.A
x Resetting the seconds to while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to without changing the minutes.
x With the 12-hour format, the (PM) indicator appears on the display for times in the P
range of noon to 11:59 p.m. and the (AM) indicator appears for times in the range A
of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
x The year can be set in the range of 2000 to 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.
x The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
E-8
3. When the setting you want to change is fl ashing, use and to change it as D B
described below.
Screen To do this: Do this:
Reset the seconds to Press .D
Change the city code Use (east) and (west). D B
Toggle between Daylight Saving Time ( )
and Standard Time ( ) Press .D
Change the hour or minutes Use (+) and (–). D B
Toggle between 12-hour ( ) and 24-hour
( ) timekeeping Press .D
Change the year, month, or day Use (+) and (–).D B
x See “Daylight Saving Time (DST)” (page E-10) for details about the DST setting.
E-7
To set the time and date
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press to move the fl ashing in the sequence shown C
below to select other settings.
Seconds City Code
Day
Minutes
12/24-Hour Format
DST Hour
Month Year
C C C C
C
CCC
C
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
x To view the current Home City code setting, press A
while in the Timekeeping Mode.
x For full information on city codes, see the “City Code
Table” at the back of this manual.
Seconds
Hour : Minutes
PM indicator
Day of week
Day
E-5
C
C C
Stopwatch Mode Countdown Timer Mode Alarm Mode
E-4
General Guide
x Press to change from mode to mode.C
x In any mode (except when a setting screen is on the display), press to illuminate B
the display.
Timekeeping Mode
C
World Time Mode
C
E-3
To illuminate the display .......................................................................................E-23
To specify the illumination duration ...................................................................E-23
To turn the button operation tone on and off .....................................................E-24
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date .........................................................................................E-7
To toggle the Timekeeping Mode time between DST and Standard Time .......E-10
To view the time in another city code ..................................................................E-11
To toggle a city code time between Standard Time
and Daylight Saving Time .................................................................................E-12
To measure times with the stopwatch .................................................................E-14
To use the countdown timer .................................................................................E-15
To set the countdown start time ..........................................................................E-16
To set an alarm time ..............................................................................................E-18
To test the alarm ....................................................................................................E-19
To turn an alarm on and off ..................................................................................E-20
To turn the Hourly Time Signal on and off ..........................................................E-21
E-1
Contents
General Guide ..........................................................................................................E-4
Timekeeping .............................................................................................................E-6
World Time .............................................................................................................E-11
Stopwatch ..............................................................................................................E-13
Countdown Timer ..................................................................................................E-15
Alarms ....................................................................................................................E-17
Illumination ............................................................................................................E-22
Reference ...............................................................................................................E-24
Specifi cations ........................................................................................................E-27
E
About This Manual
x All of the displays in this manual show black-on-white.
x Button operations are indicated using the letters shown
in the illustration.
x Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA1310-EA © 2014 CASIO COMPUTER CO., LTD.
Operation Guide 3290
E-19
4. While a setting is fl ashing, use (+) and (–) to change it.D B
x When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. ( indicator) or p.m. ( indicator).A P
5. Press to exit the setting screen.A
Alarm Operation
The alarm sounds at the preset time for about 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every fi ve minutes, or until you turn the alarm off (page E-20).
x To stop the alarm tone after it starts to sound, press any button.
x Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-7)
Displaying the setting screen (page E-18)
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-18
To set an alarm time
1. In the Alarm Mode, use to scroll through the alarm D
screens until the one whose time you want to set is
displayed.
x To set a one-time alarm, display one of the screens indicated by an alarm number
from through . To set the snooze alarm, display the screen indicated
by .
x The snooze alarm repeats every fi ve minutes.
2. After you select an alarm, hold down until the hour setting of the alarm time A
starts to fl ash, which indicates the setting screen.
x This operation turns on the alarm automatically.
3. Press to move the fl ashing between the hour and minute settings.C
E-17
Alarms
You can set fi ve independent Daily Alarms. When an alarm
is turned on, the alarm tone sounds when the alarm time
is reached. One of the alarms is a snooze alarm, while the
other four are one-time alarms.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.
x There are six screens in the Alarm Mode. Four are
for one-time alarms (indicated by numbers from
through ), one is for a snooze alarm (indicated by
), and one is for the Hourly Time Signal (indicated
by ).
x All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing (page E-5).C
Alarm number
Alarm time
(Hour : Minutes)
On/Off status
E-16
x Press while a countdown operation is in progress to pause it. Press again to D D
resume the countdown.
x To completely stop a countdown operation, fi rst pause it (by pressing ), and then D
press . This returns the countdown time to its starting value.A
To set the countdown start time
1. In the Countdown Timer Mode, hold down until the A
hours of the countdown start time start to fl ash, which
indicates the setting screen.
2. Press to move the fl ashing between the hours and C
minutes.
3. While a setting is fl ashing, use (+) or (–) to D B
change it.
x To set the starting value of the countdown time to
24 hours, set .
4. Press to exit the setting screen.A
E-15
Countdown Timer
The countdown timer can be set within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero.
x The countdown operation continues even if you exit the
Countdown Timer Mode.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-5).
To use the countdown timer
Press while in the Countdown Timer Mode to start the D
countdown timer.
x When the end of the countdown is reached, the alarm
sounds for 10 seconds or until you stop it by pressing any
button. The countdown time is automatically reset to its
starting value after the alarm stops.
Hours
Minutes
Seconds
E-14
To measure times with the stopwatch
Elapsed Time
DDDDA
Start Stop Re-start Stop Clear
Split Time
D A A D A
Start Split
( displayed)
Split release Stop Clear
Two Finishes
D A D A A
Start Split
First runner
fi nishes. Display
time of fi rst runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Clear
E-13
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two fi nishes.
x The display range of the stopwatch is 59 minutes,
59.99 seconds.
x The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
time measurement.
x All of the operations in this section are performed in
the Stopwatch Mode, which you enter by pressing C
(page E-5).
Minutes
Seconds
1/100 second
E-12
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use to display the city code D
(time zone) whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down for about one second to toggle between A
Daylight Saving Time ( indicator displayed) and DST
Standard Time ( indicator not displayed).DST
x The indicator is on the display whenever you display DST
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
x In the World Time Mode, you can switch the city code
you currently have selected as your Timekeeping Mode
Home City between Standard Time and DST. The setting
you select in the World Time Mode will also be applied in
the Timekeeping Mode.
DST indicator
E-11
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-4).
To view the time in another city code
In the World Time Mode, press to scroll eastwardly D
through city codes.
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make the necessary changes.
City code
Current time in the zone of
the selected city code
E-10
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press twice to display the DST setting screen.C
3. Press to toggle between Daylight Saving Time (D)
and Standard Time ( ).
4. Press to exit the setting screen.A
x The indicator is displayed on the Timekeeping Mode DST
and Alarm Mode screen while Daylight Saving Time is
turned on.
DST indicator
On/Off status
Operation Guide 3290
L-1
City Code Table
E-28
Alarms: 5 daily alarms (4 one-time alarms: 1 snooze alarm); Hourly Time Signal
Illumination: EL Backlight (electro-luminescent panel); Selectable illumination
duration
Other: Button operation tone on/off
Battery: One lithium battery (Type: CR1616)
Approximately 3 years on type CR1616 (assuming alarm operation 10 seconds per
day, and one illumination operation 1.5 seconds per day)
The above battery life is shortened by illumination as shown below.
x 5 illumination operations (10 seconds) per day: approximately 2.5 years
x 10 illumination operations (20 seconds) per day: approximately 1.7 years
E-27
Specifi cations
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, a.m. (A)/p.m. (P), day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes); Daylight Saving
Time (summer time)/Standard Time
World Time: 48 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 59' 59.99''
Measuring modes: Elapsed time, split time, two fi nishes
Countdown Timer
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
E-26
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears fi rst.
World Time
x The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.
x All World Time Mode times are calculated from the current Home City time in the
Timekeeping Mode using UTC time differential values.
x The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the
world-wide scientifi c standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
rotation.
E-25
x Holding down to turn the button operation tone on or off also causes the watch’s C
current mode to change.
x The mute indicator is displayed in all modes when the button operation tone is
turned off.
Auto Return Features
x If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it automatically changes to the Timekeeping Mode.
x If you leave a screen with fl ashing digits or a cursor on the display for two or three
minutes without performing any operation, the watch automatically saves any
settings you have made up to that point and exits the setting screen.
Scrolling
The and buttons are used in various modes and setting screens to scroll B D
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls at high speed.
E-24
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Button Operation Tone
The button operation tone sounds any time you press one
of the watch’s buttons. You can turn the button operation
tone on or off as desired.
x Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down to toggle the button operation tone C
on ( not displayed) and off ( displayed).
Mute indicator
E-23
To illuminate the display
In any mode (except when a setting screen is on the display), press to turn on B
illumination.
x You can use the procedure below to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press , the illumination will remain on for about B
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
To specify the illumination duration
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. While the seconds are fl ashing, press to toggle the B
illumination duration between 1.5 seconds ( ) and 3
seconds ( ).
3. Press to exit the setting screen.A
E-22
Illumination
This watch has an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark.
Illumination Precautions
x The electro-luminescent panel that provides illumination
loses power after very long use.
x Illumination may be hard to see when viewed under
direct sunlight.
x The watch may emit an audible sound whenever the
display is illuminated. This is due to vibration of the
EL panel used for illumination, and does not indicate
malfunction.
x Illumination automatically turns off whenever an alarm
sounds.
x Frequent use of illumination runs down the battery.
E-21
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use to select the Hourly Time D
Signal ( ).
2. Press to toggle it on (A displayed) and off
( displayed).
x The Hourly Time Signal on indicator is shown on the
display in all modes while the Hourly Time Signal is
turned on.
Hourly time signal on
indicator
On/Off status
E-20
To turn an alarm on and off
1. In the Alarm Mode, use to select an alarm.D
2. Press to toggle it on (A displayed) and off
( displayed).
x Turning on a one-time alarm ( through )
displays the alarm on indicator on its Alarm Mode screen.
x Turning on the snooze alarm ( ) displays the alarm
on indicator and snooze alarm indicator on the Alarm
Mode snooze alarm screen.
x In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
x The alarm on indicator fl ashes while the alarm is
sounding.
x The snooze alarm indicator fl ashes during the 5-minute
intervals between alarms.
Alarm on indicator
Snooze alarm indicator
On/Off status
Produktspezifikationen
| Marke: | Casio |
| Kategorie: | betrachten |
| Modell: | Baby-G BGD-525-7ER |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Casio Baby-G BGD-525-7ER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung betrachten Casio
9 Oktober 2024
7 Oktober 2024
6 Oktober 2024
1 Oktober 2024
30 September 2024
25 September 2024
23 September 2024
21 September 2024
20 September 2024
16 September 2024
Bedienungsanleitung betrachten
- betrachten Medion
- betrachten Clas Ohlson
- betrachten Beper
- betrachten Velleman
- betrachten IKEA
- betrachten Technaxx
- betrachten ADE
- betrachten Auriol
- betrachten Eurochron
- betrachten Irox
- betrachten MarQuant
- betrachten Prologue
- betrachten Renkforce
- betrachten Braun
- betrachten Eta
- betrachten Polar
- betrachten Alpina
- betrachten Pyle
- betrachten Mitsubishi
- betrachten Lynx
- betrachten Topcom
- betrachten Speedo
- betrachten Seiko
- betrachten Calypso
- betrachten Fossil
- betrachten Garmin
- betrachten Jaguar
- betrachten Lotus
- betrachten Michael Kors
- betrachten Skagen
- betrachten Bushnell
- betrachten Citizen
- betrachten Alessi
- betrachten Dugena
- betrachten Krontaler
- betrachten Mondaine
- betrachten Epson
- betrachten Westfalia
- betrachten Suunto
- betrachten BML
- betrachten Swatch
- betrachten Tissot
- betrachten Adidas
- betrachten Ascot
- betrachten Asics
- betrachten Bruno Söhnle
- betrachten Edox
- betrachten Lorus
- betrachten Maurice Lacroix
- betrachten Huawei
- betrachten Omega
- betrachten Kogan
- betrachten TomTom
- betrachten Grand Seiko
- betrachten Armani
- betrachten Bering
- betrachten Breitling
- betrachten Breo
- betrachten Bulova
- betrachten Certina
- betrachten Christiaan Van Der Klaauw
- betrachten Daniel Steiger
- betrachten Davis
- betrachten Detomaso
- betrachten Diesel
- betrachten Ebel
- betrachten Elysee
- betrachten Executive
- betrachten Festina
- betrachten Fila
- betrachten Freestyle
- betrachten Gant
- betrachten Gc
- betrachten Girard-Perregaux
- betrachten Guess
- betrachten Hamilton
- betrachten Holzkern
- betrachten Hugo Boss
- betrachten Ice Watch
- betrachten Invicta
- betrachten IWC
- betrachten Jacques Lemans
- betrachten Junghans
- betrachten Lacoste
- betrachten Longines
- betrachten Luminox
- betrachten Olivia Burton
- betrachten Orient
- betrachten Pulsar
- betrachten Puma
- betrachten Sinn
- betrachten Slazenger
- betrachten Stührling
- betrachten Swiza
- betrachten Timberland
- betrachten Timex
- betrachten TMI
- betrachten Torgoen
- betrachten Tudor
- betrachten TW Steel
- betrachten Versace
- betrachten Zenith
- betrachten Victorinox
- betrachten ETT
- betrachten Boss
- betrachten La Crosse Technology
- betrachten Oregon Scientific
- betrachten Spin Master
- betrachten TicWatch
- betrachten Dakota
- betrachten Danish Design
- betrachten Digi-tech
- betrachten ESQ
- betrachten Ferrari
- betrachten GC Watches
- betrachten Haffstreuner
- betrachten Inter-Quartz
- betrachten Just
- betrachten Kalenji
- betrachten La Crosse
- betrachten Lambretta
- betrachten Marc Jacobs
- betrachten Meister Anker
- betrachten Misfit
- betrachten Movado
- betrachten Naitica
- betrachten Naviforce
- betrachten Nike
- betrachten QQ
- betrachten Rado
- betrachten Rodania
- betrachten Rolex
- betrachten Ronda
- betrachten Skmei
- betrachten Spinnaker
- betrachten Tauchmeister
- betrachten Timer
- betrachten TimeStyle
- betrachten Tommy Hilfiger
- betrachten Uri Minkoff
- betrachten Xonix
- betrachten Shinola
- betrachten Philip Watch
- betrachten Brera
- betrachten Lucien Picard
- betrachten So & Co
- betrachten Nautica
- betrachten Obaku
- betrachten Christopher Ward
- betrachten Hublot
- betrachten Tikkers
- betrachten Audemars Piguet
- betrachten Pilgrim
- betrachten Lars Larsen
- betrachten Klaus Kobec
- betrachten DMC
- betrachten Raketa
- betrachten Balmain
- betrachten Wonky Monkey
- betrachten Iron Annie
- betrachten Julie Julsen
- betrachten KRAEK
- betrachten PAUL HEWITT
- betrachten Radley London
- betrachten PANERAI
- betrachten Zeppelin
- betrachten Hype
- betrachten HYT
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024