Casio Baby-G BG-6903-7BER Bedienungsanleitung
Casio
betrachten
Baby-G BG-6903-7BER
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Casio Baby-G BG-6903-7BER (5 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/5
Operation Guide 3408
MO1212-EA © 2013 CASIO COMPUTER CO., LTD.
E-1
About This Manual
•Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•Button operations are indicated using the letters shown
in the illustration.
•Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-2
•Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch ..............................................................................................................E-12
Recall Mode ...........................................................................................................E-21
Countdown Timer .................................................................................................. E-25
Alarms ....................................................................................................................E-29
Dual Time ............................................................................................................... E-36
Illumination ............................................................................................................E-38
Reference .............................................................................................................. E-42
Specifications ....................................................................................................... E-47
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-8
To toggle between 12-hour and 24-hour timekeeping ....................................... E-10
To toggle the Timekeeping Mode between DST and Standard Time ................ E-11
To measure elapsed time ..................................................................................... E-15
To measure elapsed time with lap times ............................................................ E-15
To measure elapsed time with split times .......................................................... E-17
To time first and second place finishes .............................................................. E-18
To recall stopwatch time records ........................................................................ E-22
To delete a log ....................................................................................................... E-24
E-5
To use the countdown timer ................................................................................ E-26
To configure countdown start time and auto-repeat settings .......................... E-27
To set an alarm time ............................................................................................. E-31
To test the alarm ................................................................................................... E-33
To select the operation of Alarm
1
...................................................................... E-34
To turn Alarms
2
and
3
on and off ..................................................................... E-35
To turn the hourly time signal on and off ........................................................... E-35
To set the Dual Time ............................................................................................. E-36
To illuminate the display manually ...................................................................... E-38
To specify the illumination duration ................................................................... E-39
To turn the auto light switch on and off .............................................................. E-41
To turn the button operation tone on and off ..................................................... E-43
E-6
General Guide
•Press C to change from mode to mode.
•In any mode (except when a setting screen is on the display), press L to illuminate
the face of the watch.
Timekeeping Mode
Press .C
Stopwatch Mode
â–˛
â–˛
E-7
Dual Time Mode
Countdown Timer Mode
Alarm Mode
Recall Mode
â–˛
â–˛
â–˛
â–˛
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Hour Minutes
Year
DST
Day Month
Seconds
PM indicator
Minutes
Seconds
Month – DayDay of week
Hours
Seconds E-9
3. When the setting you want to change is flashing, use D B and to change it as
described below.
Screen: To do this:
Reset the seconds to 00
Toggle between Daylight Saving
Time ( ON) and Standard Time (OF)
Change the hour or minutes
Change the year
Change the month or day
Do this:
Press D.
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
4. Press A to exit the setting screen.
•The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
Operation Guide 3408
E-10
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-
hour timekeeping.
•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the left
of the hour digits for times in the range of midnight to 11:59 a.m.
•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
•The A and P indicators are not displayed with the Timekeeping Mode time on the
Countdown Timer Mode and Dual Time Mode screens.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-11
To toggle the Timekeeping Mode between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press once and the DST setting screen appears.C
3. Press D to toggle between Daylight Saving Time (ON
displayed) and Standard Time ( displayed).OF
4. Press to exit the setting screen.A
•The DST indicator appears on the Timekeeping and
Alarm Mode screens to indicate that Daylight Saving
Time is turned on.
DST indicator
On/Off status
E-12
Stopwatch
The stopwatch lets you measure elapsed time, lap times,
split times, and two finishes. Lap times and split times can
be stored in memory.
•The display range of the stopwatch is 99 hours,
59 minutes, 59 seconds.
•All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C (page
E-6).
Note
•“Lap time” is the time spent to cover a specific segment
of a race, such as one lap around a track. “Split time” is
the time spent from the beginning of a race up to a
certain point.
•The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
Minutes Seconds
1/100
secondHours
Remaining
free records
E-13
•The stopwatch measurement operation continues even if you exit the Stopwatch
Mode.
•For information about how stopwatch times are stored in memory, see “Memory
Management” (page E-19).
Viewing the Stopwatch Displays
The information that appears in the watch’s upper and lower displays depends on
whether you are measuring lap times or split times.
Lap Time Measurement
Upper Display: Lap time
Lower Display: Elapsed time
Split Time Measurement
Upper Display: Lap time
Lower Display: Elapsed time (Split time appears here for eight seconds as it is stored
in memory.)
•See “To measure elapsed time with lap times” (page E-15) and “To measure elapsed
time with split times” (page E-17) for more information about each type of measurement.
E-14
•You can perform elapsed time measurement starting from either the lap time screen
or the split time screen (pages E-15 and E-17). Whenever you enter the Stopwatch
Mode, the screen (lap time or split time) that was displayed when you last exited the
mode will appear first.
•During a stopwatch elapsed time operation, the upper display initially shows
minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and
seconds when the time in the upper display exceeds 60 minutes.
•The lower display initially shows hours, minutes, seconds, and a 1/100-second
value. This changes to hours, minutes, and seconds when the time in the lower
display exceeds 10 hours.
â–˛
â–˛
More than 10 hours
More than one hour
Minutes
Seconds
1/100 second Hours
Minutes
Seconds
Hours
Minutes
Seconds
1/100 second
Hours
Minutes
Seconds
E-15
To measure elapsed time
Note
•You can perform the following steps starting from either the lap time screen or the
split time screen.
1. Press D to start the stopwatch.
2. Press D again to stop the stopwatch.
•You can resume the measurement operation by pressing D.
3. Press B to clear the stopwatch to all zeros.
To measure elapsed time with lap times
1.
When the stopwatch display shows all zeros, press
B
to display the lap time screen (indicated by LAP/ ).
2. Press D to start an elapsed time measurement.
•At the time, both the upper and lower displays will
show identical times.
3. Press B to record the time of the first lap.
E-16
•This freezes the current lap time in the upper part of
the display for about eight seconds, while
measurement of total elapsed time and the next lap
time continue internally. The lap number of the
displayed time appears in the lower display.
•After eight seconds, the ongoing elapsed time
measurement re-appears in the lower display.
4. Repeat step 3 to record more lap times.
5. Press D to stop the stopwatch.
6. Press B to clear the stopwatch to all zeros.
•Lap numbers are incremented automatically starting
from whenever you press in step 3 of the above1B
procedure. The maximum lap number is 99. Recording
a lap after that causes the lap number count to restart
from .00
Lap number
Elapsed time
Lap time
Lap time
E-17
To measure elapsed time with split times
1. When the stopwatch display shows all zeros, press B
to display the split time screen (indicated by SPL/ ).
2. Press D to start an elapsed time measurement.
•At the time, both the upper and lower displays will
show identical times.
3. Press B to record the time of the first split.
•The current split time appears in the lower display for
about eight seconds, as the total elapsed time, next
lap time, and next split time continue to be timed
internally by the watch. The split number of the
displayed time appears in the upper display.
•After eight seconds, the ongoing lap time
measurement appears in the upper display and the
ongoing elapsed time measurement appears in the
lower display.
4. Repeat step 3 to record more split times.
5. Press D to stop the stopwatch.
6. Press B to clear the stopwatch to all zeros.
Split time
Split number
Split Time Recording
(Displayed for eight seconds
after B is pressed.)
Lap time
Elapsed time
E-18
•Split numbers are incremented automatically starting from 1 whenever you press B
in step 3 of the above procedure. The maximum split number is 99. Recording a split
time after that causes the split number count to restart from 00.
To time first and second place finishes
1. When the stopwatch display shows all zeros, press B to display the split time
screen (indicated by SPL/ ).
2. Press D to start a time measurement.
3. Press B when the first finisher crosses the finish line.
•This freezes the time of the first finisher in the lower part of the display for about
eight seconds. After that, the display returns to elapsed time measurement.
4. Press D when the second finisher crosses the finish line.
•The second finisher’s time will appear in the lower display.
•The difference between the first finisher’s and the second finisher’s time will
appear in the upper display.
5. Press B to clear the stopwatch to all zeros.
E-19
Memory Management
A new log is created each time you press D in the Stopwatch Mode to start a new
elapsed time measurement operation. A log contains a log title screen, and records of
all the lap or split times you record during the current elapsed time measurement
operation.
•The capacity of the watch’s memory is 60 records.
•If you are adding records to the only log in memory and watch memory becomes
full, adding another record causes the oldest record in the log to be deleted
automatically to make room for the new record.
•If you are adding records to a log when there are multiple logs in memory and watch
memory becomes full, adding another record causes the oldest log in memory and
all of its records to be deleted automatically to make room for new records.
Operation Guide 3408
E-20
Stopwatch Button
Operation
From all-zeros, press
D to start.
Press B to display
lap/split time.
Press to stopD
elapsed time
measurement and then
press B to reset.
Data Storage Description
Creates a new log. Stores the date the button was
pressed, and the new log number.
Creates a new record with each button operation. Stores
the lap and split times and total elapsed time at each point
the button is pressed.
Resets the elapsed time to all zeros without recording
How stopwatch data is stored
The following table shows how stopwatch data is stored when you perform stopwatch
button operations.
•See “Recall Mode” (page E-21) for details on how to recall time records from
memory.
E-21
Recall Mode
Use the Recall Mode to recall and delete logs and records
you stored in the Stopwatch Mode. You can use the Recall
Mode to view both lap and split time records.
•When you enter the Recall Mode, the newest log
recorded in the Stopwatch Mode will appear first. If there
are no logs in memory, xxxxxxxxxxxxxxxxxxxx appears on the display.
•You can use the Recall Mode to check memory data
even while a stopwatch elapsed time measurement
operation is in progress. However, the time data that is
currently being measured will not appear in the Recall
Mode.
•You can convert a lap time saved in the Stopwatch
Mode to a split time (page E-22).
Day of week
Month – Day
Log number
Log Title Screen
E-22
To recall stopwatch time records
1. In the Stopwatch Mode, check to make sure that the displays reset to all zeros
(page E-15).
•If all zeros are not displayed, reset the stopwatch.
2. Use the A button to select either the lap time screen (to view lap time records) or
the split time screen (to view split time records) (pages E-15 and E-17).
•To convert a lap time saved in the Stopwatch Mode to a split time, select the split
time screen.
3. Press the C button to enter the Recall Mode.
4. Use the A button to scroll through the log title screens from the newest to the
oldest until the title screen of the log whose records you want to view is displayed.
5. Press D to scroll through the records contained in the log you selected in step 4,
from the oldest to the newest.
E-23
•Whether you will be able to view lap time records or split time records will depend on
the screen you selected in step 2, above.
Press D.
â–˛
Lap number
Split number
Log number
Log Title Screen
First record Last record
â–˛
â–˛
Lap time
Split time
â–˛
â–˛
E-24
To delete a log
1. In the Recall Mode, display the title screen of the log you want to delete.
2. Hold down B and D until CLR stops flashing on the display.
•This deletes the log and all the records inside it.
•Deleting a single log slides all newer logs (ones with higher log numbers) upwards to
fill the empty space. This cause the log numbers of all the newer logs to be reduced
by 1. If there are six logs currently in memory (numbered 01 through 06) and you
delete log 03, the numbers of logs that previously were numbered 04, 05, and 06 will
change to 03, 04, and 05.
E-25
Countdown Timer
You can set the countdown timer within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero.
•You also can select auto-repeat, which automatically
restarts the countdown from the original value you set
whenever zero is reached.
•All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
SecondsHours
Minutes
Timekeeping
Mode time
Auto-repeat
on indicator
E-26
To use the countdown timer
Press while in the Countdown Timer Mode to start the countdown timer.D
•When the end of the countdown is reached and auto-repeat is turned off, the alarm
sounds for 10 seconds or until you stop it by pressing any button. The countdown
time is reset automatically to its starting value after the alarm stops.
•When auto-repeat is turned on, the countdown will restart automatically without
pausing when it reaches zero. The alarm sounds when the countdown reaches zero.
•The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
•Press D while a countdown operation is in progress to pause it. Press again toD
resume the countdown.
•To stop a countdown operation completely, first pause it (by pressing D), and then
press B. This returns the countdown time to its starting value.
E-27
To configure countdown start time and auto-repeat settings
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the hour
setting of the countdown start time starts to flash, which
indicates the setting screen.
•If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-26) to display it.
2. Press C to move the flashing in the sequence shown
below, and select the setting you want to change.
Start Time
(Minutes)
Auto-Repeat
On/Off
Start Time
(Hours)
On/Off status
Auto-repeat on indicator
E-28
3. Perform the following operations, depending on which setting currently is selected
on the display.
•While the start time setting is flashing, use D B (+) and (–) to change it.
•Set 0:00 to specify 24 hours.
•While the auto-repeat on/off setting (0N or 0F) is flashing on the display, press
D to toggle auto-repeat on (0N) and off (0F).
4. Press A to exit the setting screen.
•The auto-repeat on indicator ( ) is displayed on the Countdown Timer Mode
screen while this function is turned on.
•Frequent use of auto-repeat and the alarm can run down battery power.
E-29
Alarms
You can set up to three independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time is
reached. One of the alarms can be configured as a
snooze alarm or a one-time alarm, while the other two are
one-time alarms.
You also can turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
•There are three alarm screens numbered 1 3 through .
The hourly time signal screen is indicated by :00.
•All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C (page E-7).
Alarm time
(Hour : Minutes)
Alarm number
Alarm date
(Month – Day)
Produktspezifikationen
| Marke: | Casio |
| Kategorie: | betrachten |
| Modell: | Baby-G BG-6903-7BER |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Casio Baby-G BG-6903-7BER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung betrachten Casio
9 Oktober 2024
7 Oktober 2024
6 Oktober 2024
1 Oktober 2024
30 September 2024
25 September 2024
23 September 2024
21 September 2024
20 September 2024
16 September 2024
Bedienungsanleitung betrachten
- betrachten Medion
- betrachten Clas Ohlson
- betrachten Beper
- betrachten Velleman
- betrachten IKEA
- betrachten Technaxx
- betrachten ADE
- betrachten Auriol
- betrachten Eurochron
- betrachten Irox
- betrachten MarQuant
- betrachten Prologue
- betrachten Renkforce
- betrachten Braun
- betrachten Eta
- betrachten Polar
- betrachten Alpina
- betrachten Pyle
- betrachten Mitsubishi
- betrachten Lynx
- betrachten Topcom
- betrachten Speedo
- betrachten Seiko
- betrachten Calypso
- betrachten Fossil
- betrachten Garmin
- betrachten Jaguar
- betrachten Lotus
- betrachten Michael Kors
- betrachten Skagen
- betrachten Bushnell
- betrachten Citizen
- betrachten Alessi
- betrachten Dugena
- betrachten Krontaler
- betrachten Mondaine
- betrachten Epson
- betrachten Westfalia
- betrachten Suunto
- betrachten BML
- betrachten Swatch
- betrachten Tissot
- betrachten Adidas
- betrachten Ascot
- betrachten Asics
- betrachten Bruno Söhnle
- betrachten Edox
- betrachten Lorus
- betrachten Maurice Lacroix
- betrachten Huawei
- betrachten Omega
- betrachten Kogan
- betrachten TomTom
- betrachten Grand Seiko
- betrachten Armani
- betrachten Bering
- betrachten Breitling
- betrachten Breo
- betrachten Bulova
- betrachten Certina
- betrachten Christiaan Van Der Klaauw
- betrachten Daniel Steiger
- betrachten Davis
- betrachten Detomaso
- betrachten Diesel
- betrachten Ebel
- betrachten Elysee
- betrachten Executive
- betrachten Festina
- betrachten Fila
- betrachten Freestyle
- betrachten Gant
- betrachten Gc
- betrachten Girard-Perregaux
- betrachten Guess
- betrachten Hamilton
- betrachten Holzkern
- betrachten Hugo Boss
- betrachten Ice Watch
- betrachten Invicta
- betrachten IWC
- betrachten Jacques Lemans
- betrachten Junghans
- betrachten Lacoste
- betrachten Longines
- betrachten Luminox
- betrachten Olivia Burton
- betrachten Orient
- betrachten Pulsar
- betrachten Puma
- betrachten Sinn
- betrachten Slazenger
- betrachten StĂĽhrling
- betrachten Swiza
- betrachten Timberland
- betrachten Timex
- betrachten TMI
- betrachten Torgoen
- betrachten Tudor
- betrachten TW Steel
- betrachten Versace
- betrachten Zenith
- betrachten Victorinox
- betrachten ETT
- betrachten Boss
- betrachten La Crosse Technology
- betrachten Oregon Scientific
- betrachten Spin Master
- betrachten TicWatch
- betrachten Dakota
- betrachten Danish Design
- betrachten Digi-tech
- betrachten ESQ
- betrachten Ferrari
- betrachten GC Watches
- betrachten Haffstreuner
- betrachten Inter-Quartz
- betrachten Just
- betrachten Kalenji
- betrachten La Crosse
- betrachten Lambretta
- betrachten Marc Jacobs
- betrachten Meister Anker
- betrachten Misfit
- betrachten Movado
- betrachten Naitica
- betrachten Naviforce
- betrachten Nike
- betrachten QQ
- betrachten Rado
- betrachten Rodania
- betrachten Rolex
- betrachten Ronda
- betrachten Skmei
- betrachten Spinnaker
- betrachten Tauchmeister
- betrachten Timer
- betrachten TimeStyle
- betrachten Tommy Hilfiger
- betrachten Uri Minkoff
- betrachten Xonix
- betrachten Shinola
- betrachten Philip Watch
- betrachten Brera
- betrachten Lucien Picard
- betrachten So & Co
- betrachten Nautica
- betrachten Obaku
- betrachten Christopher Ward
- betrachten Hublot
- betrachten Tikkers
- betrachten Audemars Piguet
- betrachten Pilgrim
- betrachten Lars Larsen
- betrachten Klaus Kobec
- betrachten DMC
- betrachten Raketa
- betrachten Balmain
- betrachten Wonky Monkey
- betrachten Iron Annie
- betrachten Julie Julsen
- betrachten KRAEK
- betrachten PAUL HEWITT
- betrachten Radley London
- betrachten PANERAI
- betrachten Zeppelin
- betrachten Hype
- betrachten HYT
Neueste Bedienungsanleitung fĂĽr -Kategorien-
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024