Casio AW-90H-9EVEF Bedienungsanleitung

Casio Armbanduhr AW-90H-9EVEF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio AW-90H-9EVEF (2 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Operation Guide 3321

MA0310-EA

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode Calendar Mode Alarm Mode Dual Time Mode Stopwatch Mode

Press .

General Guide

•Press B to change from mode to mode.

Timekeeping

Use this mode to set the current time. An incorrect digital time setting will cause

incorrect operation of the calendar.

To set the digital time

indicator

Hour hand Minute hand

Seconds

Minutes

Hour

Press .

Press .Press .

Hold down . Press .

Seconds Hour

Minutes12/24

1. In the Timekeeping Mode, hold down C until the seconds digits start to flash,

which indicates the setting screen.

2. Press B to reset the seconds to 00.

3. Press C to move the selection to the hour digits.

4. Press B to increase the hour digits.

5. Press C to move the selection to the minutes digits.

6. Press B to increase the minutes digits.

7. Press C to move the selection to 12/24.

8. Press B to toggle the timekeeping format between 12-hour and 24-hour.

9. Press C to exit the setting screen.

•Resetting the seconds to 00 while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to 00

without changing the minutes.

•With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and no indicator appears for times in the range of

midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

To set the hands

In any mode, press A with a thin object to advance the analog time setting. Each

press of A advances the time by 20 seconds. Three presses advance by one minute.

Holding down A advances the analog setting at high speed. You can only advance

the setting. You cannot reverse it.

Calendar

Use this mode to set today s date (month, day, day of the week).’

To set the date

Day of week

Day

Month

Press .Hold down . Press .

Press .

DayMonth Day of week

1. In the Calendar Mode, hold down C until the month digits start to flash, which

indicates the setting screen.

2. Press B to increase the month digits.

3. Press C to move the selection to the day digits.

4. Press B to increase the day digits.

5. Press C to move the selection to the day of the week.

6. Press B to advance to the next day.

7. Press C to exit the setting screen.

•The watch does not make any allowance for leap years. Be sure to manually set

February 29 when one occurs during a leap year.

Alarm

When the Daily Alarm is turned on, an alarm sounds for 20 seconds at the preset time

each day. When the Hourly Time Signal is turned on, the watch beeps every hour on

the hour.

•You can configure alarm settings and Hourly Time Signal settings in the Alarm

Mode, which you enter by pressing B.

To set the alarm time and to turn the Daily Alarm and Hourly Time Signal on

and off

Hourly time

signal on indicator

Mode indicator

Alarm on indicator

Hour

Minutes

Press

Hold down

Press .

Left

minutes

digit

Right

minutes

digit

Hour

Alarm/Hourly Time Signal setting

1. In the Alarm Mode, hold down C until the hour digits start to flash, which indicates

the setting screen.

2. Press B to increase the hour digits.

•The 12/24-hour format of the alarm time matches the format you select for normal

timekeeping.

3. Press C to move the selection to the left minutes digit.

4. Press B to increase the left minutes digit.

5. Press C to move the selection to the right minutes digit.

6. Press B to increase the right minutes digit.

7. Press C to move to the Daily Alarm and Hourly Time Signal on and off setting.

8. Press B to cycle through the Daily Alarm and Hourly Time Signal settings as

shown in the sequence below.

•At this time Daily Alarm and Hourly Time Signal automatically turn on.

Daily Alarm

only

Both OFFBoth ON Hourly Time

Signal only

Press

Press .

9. Press C to exit the setting screen.

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To test the alarm and select an alarm tone

Hold down in any mode (except when making any settings) to sound the alarm.B

Note that the alarm sound changes each time you hold down to test the alarm.B

There are a total of four different alarm sounds. The last alarm sound you hear when

performing the above test is the one that is used for the Daily Alarm and the Hourly

Time Signal.

•Note that holding down B also changes the mode.

Operation Guide 3321

Mode indicator

Minutes 1/100

second

Seconds

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.

•In the Dual Time Mode, the seconds count is synchronized with the seconds count

of the Timekeeping Mode digital time.

To set the Dual Time

Seconds

Minutes

Hour

Press .Hold down . Press .

Press .

Minutes 12/24Hour

Mode

indicator

1. In the Dual Time Mode, hold down C until the hour digits start to flash, which

indicates the setting screen.

2. Press B to increase the hour digits.

3. Press C to move the selection to the minutes digits.

4. Press B to increase the minutes digits.

5. Press C to move the selection to 12/24.

6. Press B to toggle the timekeeping format between 12-hour and 24-hour.

7. Press C to exit the setting screen.

•With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and no indicator appears for times in the range of

midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

Stopwatch

The Stopwatch Mode lets you measure elapsed time. The

range of the stopwatch is 59 minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

•The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

To use the Stopwatch

1. In the Stopwatch Mode, press to start theC

stopwatch.

2. Press to stop the time measurement.C

•You can press as many times as you want toC

resume and stop timing.

3. After you are finished using the stopwatch, hold down

C to clear the stopwatch time to all zeros.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto return features

If you leave a screen with flashing digits for one or two minutes without performing

any operation, the watch automatically saves any settings you have made up to that

point and exits the setting screen.

Scrolling

The B button is used to scroll through setting screen data on the display. Holding

down this button during a scroll operation scrolls through the data at high speed.

Produktspezifikationen

Marke:	Casio
Kategorie:	Armbanduhr
Modell:	AW-90H-9EVEF
Bandmaterial:	Harz
Wasserfest:	Ja
Kalender:	Ja
Stoppuhr:	Nein
Breite:	38.6 mm
Tiefe:	45 mm
Gewicht:	30 g
Produktfarbe:	Schwarz
Akku-/Batterietyp:	SR920W
Höhe:	9.5 mm
Anzahl unterstützter Akkus/Batterien:	1
Produktdesign:	Sport
Material des Uhrengehäuses:	Harz
Abmessungen (BxTxH):	38.6 x 45 x 9.5 mm
Gehäusefarbe:	Schwarz
Uhrzifferblatt-Typ:	Analog- & LCD-Zifferblatt
Wasserdicht bis Tiefe:	50 m
Uhrentyp:	Armbanduhr
Hauptfarbe Band:	Schwarz
Gehäuseform:	Rund
Hauptfarbe Zifferblatt:	Schwarz
Markierungstyp:	nicht numerisch
Farbe der Markierungen:	Schwarz
Mechanismus-Typ:	Quarz
Weckerfunktion:	Ja
Batterie Lebensdauer:	3 Jahr(e)
Akkurazität:	30 Sek/Monat