Casio AQ-230EGG-2AEF Bedienungsanleitung

Casio betrachten AQ-230EGG-2AEF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio AQ-230EGG-2AEF (2 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Operation Guide 5154
E-13
Dual Time Mode
The Dual Time function lets you set a second digital time
that operates independently of the current analog and digital
times. This means you can keep track of time in another
time zone.
To set the Dual Time
In the Dual Time Mode, hold down 1. until the hour digits C
start to fl ash on the display. The hour digits fl ash because
they .are selected
Press 2. to change the selection in the following C
sequence.
12/24-Hour Format
C
C
MinutesHour
C
Dual Time Mode
SecondsHour
Minutes
Mode indicator
E-12
While the Daily Alarm/Hourly Time Signal setting is selected, press 4. to change B
the status in the following sequence.
Alarm On Indicator/Hourly Time Signal On Indicator
BBB
Both On Both Off Daily Alarm only Hourly Time
Signal only
B
After you confi gure your alarm setting, press 5. to select the Alarm Mode.C
If you do not operate any button for a few minutes while a selection is fl ashing, x
the fl ashing stops and the watch goes back to the Timekeeping Mode screen
automatically.
To test the alarm
Hold down in any mode to sound the alarm. Note that pressing also changes B B
the mode.
E-11
Press 2. to change the selection in the following sequence.C
Minutes (tens digit)
Alarm/Hourly Time Signal
C
C
Minutes (ones digit)
C
Hour
C
Alarm Mode
Once you reach the Alarm Mode screen, you have to hold down xC again to
display the fl ashing hour.
Press 3. to increase the selected digits. Holding down changes the selection B B
at high speed.
The format (12-hour or 24-hour) of the alarm time matches the format you select x
for digital timekeeping.
When setting the alarm time using the 12-hour format, take care to set the time x
correctly as a.m. (no indicator) or p.m. (PM indicator).
E-10
Alarm Mode
While the Daily Alarm function is switched on, the alarm
sounds for 20 seconds at the preset time each day. Press
any button to stop the alarm after it starts to sound. When
the Hourly Time Signal is switched on, the watch beeps
every hour on the hour. Note that the Daily Alarm and
the Hourly Time Signal operate based on the digital time
setting.
To set the alarm time
In the Alarm Mode, hold down 1. until the hour digits C
start to fl ash on the display. The hour digits fl ash
because they .are selected
Mode indicator
Hour Minutes
Alarm on indicator
Hourly Time Signal on
indicator
E-9
While the month or day digits are selected (fl ashing), press 3. to increase the B
number. While the day of the week is selected, pressing advances to the next B
day of the week. Holding down changes the current selection at high speed.B
After you set the date, press 4. to display the Date Indicator Mode screen.C
The watch does not make any allowance for leap years. Be sure to manually set x
February 29 (when one occurs) for the appropriate date.
If you do not operate any button for a few minutes while a selection is fl ashing, the x
ashing stops and the watch goes back to the Timekeeping Mode automatically.
E-8
Date Indicator Mode
To set the date
In the Date Indicator Mode, hold down 1. until the C
month digits start to fl ash on the digital display. The
month digits fl ash because they .are selected
Press 2. to change the selection in the following C
sequence.
Day Day of the
week
C
Month
CDate Indicator
Mode
C
Once you reach the Date Indicator Mode screen, you x
have to hold down again to display the fl ashing C
month.
Day of the weekMonth
Day
E-7
While the seconds digits are selected (fl ashing), press 3. to reset the seconds to B
“00”. If you press while the second count is in the range of 30 to 59, it is reset to B
“00” and 1 is added to the minutes. If the second count is in the range of 00 to 29,
the minute count is unchanged.
While any other digits (besides seconds) are selected (fl ashing), press 4. to B
increase the number. Holding down changes the current selection at high B
speed. While the 12/24 hour setting is selected, press to switch between the B
two formats.
After you set the time and format, press 5. to display the Timekeeping Mode C
screen.
If you do not operate any button for a few minutes while a selection is fl ashing, x
the fl ashing stops and the watch goes back to the Timekeeping Mode screen
automatically.
To set the analog time
When in any mode, press to advance the analog time setting.A
Hold down advances the analog setting at high speed. You can only advance the A
setting and cannot reverse it.
E-6
Timekeeping Mode
To set the digital time
In the Timekeeping Mode, hold down 1. until the C
seconds digits start to fl ash on the digital display.
The seconds ash because they .are selected
Press 2. to change the selection in the following C
sequence.
Hour
12/24-Hour Format
C
C
Minutes
C
Seconds
C
Timekeeping Mode
Once you reach the Timekeeping Mode screen, you x
have to hold down again to display the fl ashing C
seconds.
Hour hand
Minute hand
Seconds
Hour
Minutes
PM indicator
E-5
General Guide
Press xB to change from mode to mode. Each mode is explained in detail on the
following pages.
Timekeeping Mode Date Indicator Mode Alarm Mode
Dual Time ModeStopwatch Mode
B B
B
B
B
MA1202-EA
Ú
#!3)/#/-054%2#/,4$
Operation Guide 5154
E-16
Specifi cations
Accuracy at normal temperature: ±30 seconds a month
Timekeeping Mode x
Analog: Hour, minute
Digital: Hour, minutes, seconds, pm (P)
Time system: Switchable between 12-hour and 24-hour formats
Date Indicator Mode: Month, day, day of the week x
Calendar system: Auto-calendar set at 28 days for February
Alarm Mode: Daily alarm, hourly time signal x
Dual Time Mode x
Stopwatch Mode x
Measuring capacity: 59 minutes 59.99 seconds
Measuring unit: 1/100 of a second
Measuring modes: Elapsed time, cumulative elapsed time
Battery: One silver oxide battery (Type: SR920W)
Approximately 3 years on type SR920W (assuming alarm operation 20 sec/day)
E-15
Stopwatch Mode
The Stopwatch Mode measures elapsed time and
cumulative elapsed time. The range of the stopwatch is
59 minutes, 59.99 seconds.
To measure elapsed time
Press 1. to start the stopwatch.C
Press 2. to stop the stopwatch.C
Hold down 3. until the stopwatch is cleared to “00:00 00”.C
To measure cumulative elapsed time
Press 1. to start the stopwatch.C
Press 2. to stop the stopwatch.C
Press 3. again to resume timing from the time shown on C
the display. You can repeat steps 2 and 3 as many times
as you like.
Hold down 4. until the stopwatch is cleared to “00:00 00”.C
1/100 second
Minutes
Seconds
Mode indicator
E-14
Once you reach the Dual Time Mode screen, you have to hold down xC again to
display the fl ashing hour.
Press 3. to increase the selected digits. Holding down changes the selection at B B
high speed. While the 12/24-hour setting is selected, press to switch between B
the two formats.
After you set the time, press 4. to select the Dual Time Mode.C
If you do not operate any button for a few minutes while a selection is fl ashing, x
the fl ashing stops and the watch goes back to the Timekeeping Mode screen
automatically.


Produktspezifikationen

Marke: Casio
Kategorie: betrachten
Modell: AQ-230EGG-2AEF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Casio AQ-230EGG-2AEF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Casio

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-