Casio AE-3000W-1AVEF Bedienungsanleitung

Casio Armbanduhr AE-3000W-1AVEF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio AE-3000W-1AVEF (4 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Operation Guide 3447

E-9

Pressing once will display the city code of your currently selected Home City for D

about three or four seconds in place of the day of the week. After that, the day of the

week will re-appear.

For details on reading the map, see “Map” (page E-31).

E-8

Timekeeping

The Timekeeping Mode’s Multi Time feature gives you quick and easy access to the

current time and date in three different cities, numbered from TM-1 (Time 1) through

TM-3 (Time 3). TM-1 is your Home City Time, TM-2 and TM-3 are Local Times. Local

Times are kept in synchronization with your Home City Time (TM-1).

Day of week

Hour : Minutes, Seconds

P (p.m.) indicator

Local Time (TM-3)

Local Time (TM-2)

Home City Time (TM-1)

Month – Day

Map

E-7

Scrolling

The and buttons are used in various modes and setting screens to scroll B D

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls at high speed.

E-6

General Functions

This section explains general functions and operations.

Auto Return Features

If you leave the watch in the mode below for two or three minutes without performing

any operation, it automatically changes to the Timekeeping Mode.

- Alarm Mode

If you leave a screen with flashing digits on the display for two or three minutes

without performing any operation, the watch automatically exits the setting screen.

Initial Screens

When you enter the mode below, the data you were viewing when you last exited the

mode appears first.

- Alarm Mode

E-5

In any mode (except when a setting screen is on the display), press to illuminate B

the display.

Stopwatch Mode Countdown Timer Mode

E-4

General Guide

x Press to change from mode to mode.C

To return to the Timekeeping Mode from any other mode, hold down for about C

two seconds.

C C

Timekeeping Mode Alarm Mode

E-3

To disable Auto Display ........................................................................................ E-34

To enable Auto Display ......................................................................................... E-34

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To toggle the Timekeeping Mode time between DST and Standard Time ....... E-16

To illuminate the display ....................................................................................... E-20

To set an alarm time .............................................................................................. E-22

To test the alarm .................................................................................................... E-23

To enable or disable an alarm .............................................................................. E-24

To enable or disable the Hourly Time Signal ...................................................... E-25

To measure times with the stopwatch ................................................................. E-27

To configure the countdown timer ...................................................................... E-29

To use the countdown timer ................................................................................. E-30

To enable or disable the button operation tone ................................................. E-32

E-1

Contents

General Guide .......................................................................................................... E-4

Timekeeping ............................................................................................................. E-8

Alarms .................................................................................................................... E-21

Stopwatch .............................................................................................................. E-26

Countdown Timer ..................................................................................................E-28

Reference ............................................................................................................... E-31

Specifications ........................................................................................................ E-35

Operating Precautions .......................................................................................... E-37

User Maintenance .................................................................................................. E-47

About This Manual

Button operations are indicated using the letters shown in

the illustration.

Each section of this manual provides you with the

information you need to perform operations in each mode.

Further details and technical information can be found in

the “Reference” section.

To ensure that this watch provides you with the years of

service for which it is designed, be sure to read and follow

the instructions under “Operating Precautions” and “User

Maintenance”.

Be sure to keep all user documentation handy for future

reference.

Operation Guide 3447

E-19

4. Press to toggle between Daylight Saving Time ( displayed) and Standard Time D

( displayed).

5. Press .A

This enables Local Time (TM-3) setting.

If you do not want to change Local Time 3 (TM-3) settings, go directly to step 7

without doing anything here.

6. Perform steps 2 through 4 to configure Local Time 3 (TM-3) settings.

7. Press to return to the normal Timekeeping Mode.A

Illumination

LEDs (light-emitting diodes) illuminate the display for easy reading in the dark.

Illumination Precautions

Illumination may be hard to see when viewed under direct sunlight.

Illumination automatically turns off whenever an alarm sounds.

Frequent use of illumination runs down the battery.

E-18

Changing the City Code Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual for the

Local Times.

1. In the Timekeeping Mode, hold down for about five A

seconds until the currently selected city code of Local

Time 2 (TM-2) flashes on the display as shown in the

illustration.

This indicates the Local Time City setting mode.

2. Use (east) and (west) to select the city code you D B

want to assign to Local Time 2 (TM-2).

The DST setting cannot be changed while UTC is

selected as the time zone.

When setting a location that does not have a city code

assigned, you can select a city code from T-1 to T-3.

When T-1 through T-3 is selected, press and then C

select the time offset with and .D B

3. Press to display the DST setting screen.C

TM-2 city code

E-17

12/24-Hour Format

With the 12-hour format, the indicator appears to the left of the hour digits for P

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-16

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down for about two A

seconds until flashes on the display and –1– SET Hold

then disappears.

Release the button as soon as the flashing –1–

SET Hold indicator disappears and the currently

selected city code flashes on the display. This

indicates the Home City setting screen.

Keeping held down too long will change to the A

Local Time 2 (TM-2) setting screen (page E-18).

2. Press to display the DST setting screen.C

3. Press to toggle between Daylight Saving Time (D

displayed) and Standard Time ( displayed).

4. Press to exit the setting screen.A

The indicator appears on the Timekeeping screen DST

to indicate that Daylight Saving Time is enabled.

DST indicator

E-15

Screen To do this: Do this:

Toggle the setting between ON ( ) and BEEP

OFF ( )MUTE Press .D

Toggle the setting between 1.5 seconds ( )

and 3 seconds ( ) Press .D

* When setting a location that does not have a city code assigned, you can select a

city code from T-1 to T-3 (page L-3). When T-1 through T-3 is selected, press C

and then select the time offset with and .D B

See “Daylight Saving Time (DST)” on page E-15 for details about DST setting.

4. Press to exit the setting screen.A

The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-14

3. When the setting you want to change is flashing, use and to change it as D B

described below.

Screen To do this: Do this:

Change the city code* Use (east) and (west).D B

Toggle between Daylight Saving Time ( )

and Standard Time ( ) Press .D

Toggle between 12-hour ( ) and 24-hour

( ) timekeeping Press .D

Reset the seconds to Press .D

Change the hour or minute Use (+) and (–).D B

Change the year Use (+) and (–).D B

Change the month or day Use (+) and (–).D B

Toggle the setting between Month/Day

( ) and Day/Month ( )M-DD DD-M Press .D

E-13

2. Press to move the flashing in the sequence shown below to select other C

settings.

C C

City Code* DST Seconds

Illumination Duration Setting Hour

12/24-Hour Format

Button Operation Tone Minute

Date Format YearDay

C C

Month C

E-12

Changing the Current Home City Time and Date Settings

1. In the Timekeeping Mode, hold down for about two A

seconds until flashes on the display and –1– SET Hold

then disappears.

Release the button as soon as the flashing –1–

SET Hold indicator disappears and the currently

selected city code flashes on the display. This

indicates the Home City setting screen.

Keeping held down too long will change to the A

Local Time 2 (TM-2) setting screen (page E-18).

E-11

Each time you perform the above operation, the displayed city codes and times are

shifted downwards, with the bottom city code and time going up to the top position,

as shown in the example below.

TM-3 LON TYO NYC

TM-2 NYC LON TYO

TM-1 TYO NYC LON

You can change the current time setting for your Home City Time (TM-1) only.

For Local Times (TM-2, TM-3), you can change the city code and DST settings only.

E-10

Shifting Times on the Display

You can use the operation below to shift the positions of the three times on the display

downwards.

(about

1 second)

New Home City (TM-1) codeCurrent Home City code

New TM-2

New TM-3

Operation Guide 3447

E-29

To configure the countdown timer

1. While the countdown start time is displayed in the

Countdown Timer Mode, hold down until the A

flashing indicator disappears, and the current SET Hold

countdown start time starts to flash. This indicates the

setting screen.

2. Press to move the flashing in the sequence shown C

below to select other settings.

Hours Minutes

Seconds

3. When the setting you want to change is flashing, use (+) and (–) to change D B

the flashing item.

To specify a countdown start time of 24 hours, set 0H00'00".

4. Press to exit the setting screen.A

E-28

Countdown Timer

The countdown timer start time can be set within a range

of one second to 24 hours. An alarm sounds when the

countdown reaches zero.

All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C (page E-5).

1/10 second

Seconds

Current time

Hours

Minutes

E-27

To measure times with the stopwatch

Elapsed Time

D D D D A

Start Stop Resume Stop Clear

Split Time

D A A D A

Start Split

( displayed) SPL

Split release Stop Clear

Two Finishes

D A D A A

Start Split

First runner

finishes.

Display time of first

runner.

Stop

Second runner

finishes.

Split release

Display time of

second runner.

Clear

E-26

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

The stopwatch continues to run, restarting from zero after

it reaches its limit, until you stop it.

The stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to elapsed

time measurement.

All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-5).

1/100 second

Seconds

Current time

Hours

Minutes

E-25

To enable or disable the Hourly Time Signal

1. In the Alarm Mode, use to select the Hourly Time D

Signal.

2. Press to toggle it between enabled and disabled.A

The Hourly Time Signal indicator is shown on the

display in all modes while this function is enabled.

Hourly time signal indicator

E-24

To enable or disable an alarm

1. In the Alarm Mode, use to select an alarm.D

2. Press to cycle through the alarm settings as shown below.A

A A A

Alarm disabled Daily Alarm enabled One-Time Alarm

enabled

In all modes, the alarm on indicator is shown for the alarm that is currently enabled.

The alarm indicator flashes while the alarm is sounding.

E-23

3. Press to move the flashing between the hour and the minute digits.C

The selected digits are those that are flashing.

4. Use (+) and (–) to change the hour and minute settings.D B

When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. ( indicator).P

5. Press to exit the setting screen.A

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in.

Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

E-22

To set an alarm time

1. In the Alarm Mode, use to scroll through the alarm D

screens until the alarm number you want to set is

displayed.

D D

2. Hold down for about two seconds until flashes on the display and ASET Hold

then disappears, and hour digits start to flash.

x This indicates the setting screen.

This operation enables the One-time Alarm automatically.

If you want to use the Daily Alarm, refer to “To enable or disable an alarm” (page

E-24) after performing step 5.

E-21

Alarms

Your watch has a total of five alarms, each of which you

can configure as a daily alarm or one-time alarm.

Daily Alarm: Sounds at the preset time each day.

One-time Alarm: Sounds once at the preset time and

then is disabled automatically.

You can also enable an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing (page E-4).C

Alarms operate in coordination with the current Home

City Time.

Alarm number

Current time

Alarm on indicator

Alarm time

(Hour : Minutes)

E-20

To illuminate the display

In any mode (except when a setting screen is on the display), press to illuminate B

the display.

Pressing illuminates the display for 1.5 or 3 seconds, depending on the current B

illumination duration setting (page E-13).

Produktspezifikationen

Marke:	Casio
Kategorie:	Armbanduhr
Modell:	AE-3000W-1AVEF
Bandmaterial:	Harz
Wasserfest:	Ja
Uhrmodus:	12 h / 24 h
Timer:	24 h
Kalender:	Ja
Stoppuhr:	Ja
Breite:	55.5 mm
Tiefe:	15.8 mm
Gewicht:	63 g
Akku-/Batterietyp:	CR2032
Höhe:	57.1 mm
Anzahl unterstützter Akkus/Batterien:	1
Material des Uhrengehäuses:	Harz
Gehäusefarbe:	Schwarz
LED-Hintergrundbeleuchtung:	Ja
Uhrzifferblatt-Typ:	LCD-Zifferblatt
Wasserdicht bis Tiefe:	100 m
Uhrentyp:	Armbanduhr
Wasserdicht bis Druck:	10 ATM
Kalender-Typ:	Tag
Uhrenglas-Typ:	Harz
Gehäuseform:	Rund
Geschlecht:	Männlich
Weckerfunktion:	Ja
Batterie Lebensdauer:	10 Jahr(e)
Weltzeitfunktion:	Ja
Countdown-Funktion:	Ja
Akkurazität:	±30 Sek/Monat