Casio AE-1000WD-1AVEF Bedienungsanleitung

Casio Armbanduhr AE-1000WD-1AVEF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio AE-1000WD-1AVEF (3 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Operation Guide 3198

Timekeeping

The Timekeeping Mode’s Multi Time feature gives you

quick and easy access to the current time and date in four

different cities, numbered from T-1 (Time 1) through T-4

(Time 4). T-1 is your Home City Time, and T-2, T-3, and

T-4 are Local Times. Local Times are kept in

synchronization with your Home City Time (T-1).

•The digital dial at the top of the screen indicates the

current Home City Time (T-1). For details on reading the

map and digital dial, see “Map and Digital Dial”.

MA0910-EA

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode World Time Mode Alarm Mode Countdown Timer

Mode

Stopwatch Mode

Press .

General Guide

•Press C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Seconds

Day of week

Month – Day

Hour : Minutes

PM indicator

Map

Digital dial

Switching Between Time Screens

Each press of cycles the time screens in the sequence shown below.D

Displayed for one second.

•While the Home City Time (T-1) screen is displayed, pressing A will switch the day

of the week / month-day indication to the currently selected Home City code and the

T-1 indicator for about one second.

•You can change the current time setting for your Home City Time (T-1) only.

•For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting.

Changing the Current Home City Time and Date Settings

1. Use D to display the current Home City Time (T-1)

screen.

2. Hold down A until the seconds start to flash, which

indicates the setting screen.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds City Code Hour

Year 12/24-Hour

Format

Minutes

Illumination

Duration Setting

DST

Day Month

4. When the setting you want to change is flashing, use D and B to change it as

described below.

•See “Daylight Saving Time (DST)” for details about DST setting

5. Press A to exit the setting screen.

•The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard

Time. Remember that not all countries or even local areas use Daylight Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. Use D to display the current Home City Time (T-1)

screen.

2. Hold down A until the seconds start to flash, which

indicates the setting screen.

3. Press C to display the DST setting screen.

4. Press D to toggle between Daylight Saving Time

( displayed) and Standard Time ( displayed).

5. Press A to exit the setting screen.

•The DST indicator appears on the Timekeeping screen

to indicate that Daylight Saving Time is turned on.

12/24-Hour Format

•With the 12-hour format, the indicator appears to the left of the hour digits forPM

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Changing the City Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual as a

Local Time city.

1. Display the Local Time whose city setting you want to change, and then hold down

A for about two seconds until the current city code starts fo flash.

2. Use D B (east) and (west) to select the city code you want.

3. Press C to display the DST setting screen.

4. Press D to toggle between Daylight Saving Time ( displayed) and Standard

Time ( displayed).

5. After the settings are the way you want, press A.

Changing Your Home City Time

Use the following procedure to change your current Home City Time to any one of the

three Local Times.

1. In the Timekeeping Mode, press D to display the Local Time which you want to

make your Home City Time.

2. Press A B and at the same time.

•This makes the Local Time you selected in step 1 your new Home City Time.

Screen

To do this:

Reset the seconds to .

Toggle between Daylight Saving

Time ( ) and Standard Time ( ).

Change the city code.

Change the hour or minutes.

Toggle between 12-hour ( ) and

24-hour ( ) timekeeping.

Change the year.

Change the month or day.

Toggle the setting between

1.5 seconds ( ) and 3 seconds ( ).

Do this:

Press .D

Use D (east) and B (west).

Use ).D (+) and B (–

Press .D

Use ).D (+) and B (–

Press .D

DST indicator

Operation Guide 3198

To configure the countdown timer

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down until the currentA

countdown start time starts to flash, which indicates the

setting screen.

2. Press to move the flashing in the sequence shownC

below to select other settings.

Hours Minutes

Seconds

3. When the setting you want to change is flashing, use D (+) and B (–) to change

the flashing item.

•To specify a countdown start time of 24 hours, set .

4. Press A to exit the setting screen.

To use the countdown timer

Press while in the Countdown Timer Mode to start theD

countdown timer.

•When the end of the countdown is reached, the alarm

sounds for ten seconds or until you stop it by pressing

any button. The countdown time is reset to its starting

value automatically when the alarm sounds.

•Press D while a countdown operation is in progress to

pause it. Press D again to resume the countdown.

•To stop a countdown operation completely, first pause it

(by pressing ), and then press . This returns theD A

countdown time to its starting value.

Countdown Timer

The countdown timer can be set within a range of one

second to 24 hours. An alarm sounds when the

countdown reaches zero.

•All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in.

•Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

•To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press A to cycle through the alarm settings as shown below.

Daily Alarm OnOne-Time Alarm

Alarm Off

•In all modes, the alarm on indicator is shown for the alarm that is currently turned

on.

•The alarm on indicator flashes while the alarm is sounding.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal.

2. Press A to toggle it on and off.

•The Hourly Time Signal on indicator is shown on the

display in all modes while this function is turned on.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the alarm number you want to set is

displayed.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

•This operation turns on the One-time Alarm automatically.

3. Press C to move the flashing in the sequence shown below to select other settings.

Hour Minutes

One-time Alarm/Daily Alarm Selection

4. While a setting is flashing, use D and B to change it as described below.

Alarms

Your watch has a total of five alarms, each of which you

can configure as a daily alarm or one-time alarm.

•Daily Alarm: Sounds at the preset time each day.

•One-time Alarm: Sounds once at the preset time and

then is disabled automatically.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

•All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

•Alarms operate in coordination with the current Home

City Time.

World Time

World Time shows the current time in 48 cities (31 time

zones) around the world.

•All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

To view the time for another city code

In the World Time Mode, press to scroll eastwardlyD

through city codes.

•For full information about city codes, see the “City Code

Table”.

•If the current time for a city is wrong, check your

Timekeeping Mode time and time zone settings and

make the necessary changes.

Illumination

An LED (light-emitting diode) illuminate the display for easy reading in the dark.

Illumination Precautions

•The illumination provided by the light may be hard to see when viewed under direct

sunlight.

•Illumination automatically turns off whenever an alarm sounds.

•Frequent use of illumination runs down the battery.

To turn on illumination

In any mode (except when a setting screen is on the display), press to turn onB

illumination.

•You can use the procedure above to select either 1.5 seconds or 3 seconds as the

illumination duration. When you press , the illumination will remain on for aboutB

1.5 seconds or 3 seconds, depending on the current illumination duration setting.

Current time and date in

the zone of the selected

city code

City code

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D (east) to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about one second to toggle Daylight

Saving Time (DST displayed) and Standard Time (DST

not displayed).

•The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

•Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

•Note that you cannot switch between Standard Time

and Daylight Saving Time while UTC is selected as the

city code.

To change your Home Time city to the current World Time city

1. In the World Time Mode, use to display the city you want to make your newD

Home Time city.

2. Press and at the same time.A B

•This makes the World Time city you selected in step 1 your new Home Time city.

DST indicator

Alarm time

(Hour : Minutes)

Alarm number

Alarm on indicator

5. Press A to exit the setting screen.

Screen

To do this:

Change the hour

and minutes.

Toggle between

One-time Alarm

and Daily Alarm.

Do this:

Use ).D (+) and B (–

•With the 12-hour format, set the time correctly as

a.m. or p.m. ( indicator).PM

Press .D

One-time Alarm on:

Daily Alarm on:

Seconds

1/10 second

Hours Minutes

Hourly time signal

on indicator

Operation Guide 3198

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

•A display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

•A stopwatch continues to run, restarting from zero after

it reaches its limit, until you stop it.

•A stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

•All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing .C

Seconds

Minutes Hours

1/100 second

To measure times with the stopwatch

Elapsed Time

Start Stop Re-start Stop Clear

Start Split

( displayed) SPL

Split release Stop Clear

Start Split Stop Split release Clear

Split Time

Two Finishes

First runner finishes.

Display time of first

runner.

Second runner

finishes.

Display time of

second runner.

Mute indicator

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Map and Digital Dial

Digital dial

Hour hand

Second hand Minute hand

Map

•Map: In the Timekeeping and World Time modes, the map shows the zone where

the currently displayed digital time is from. In the Alarm, Timer, and Stopwatch

modes, it shows the zone of the currently selected Home City Time (T-1).

•Digital dial: In all modes, segments indicate the current Home City Time (T-1) hour,

minute, and second.

Button Operation Tone

The button operation tone sounds any time you press one

of the watch s buttons. You can turn the button operation’

tone on or off as desired.

•Even if you turn off the button operation tone, the

alarms, the Hourly Time Signal, and the countdown

alarm all operate normally.

To turn the button operation tone on and off

In any mode (except when a setting screen is on the display), hold down to toggleC

the button operation tone on (the MUTE indicator not displayed) and off (the MUTE

indicator displayed).

•Holding down C to turn the button operation tone on or off also causes the watch’s

current mode to change.

•The MUTE indicator is displayed in all modes when the button operation tone is

turned off.

Auto Return Features

•If you leave the watch in the Alarm Mode for two or three minutes without performing

any operation, it automatically changes to the Timekeeping Mode.

•If you leave a screen with flashing digits on the display for two or three minutes

without performing any operation, the watch automatically exits the setting screen.

Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls at high speed.

Initial Screens

When you enter the World Time or Alarm Mode, the data you were viewing when you

last exited the mode appears first.

Timekeeping

••••

•Resetting the seconds to 00 while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to 00

without changing the minutes.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch s battery replaced.’

World Time

•The seconds count of the World Time is synchronized with the seconds count of the

Timekeeping Mode.

•All World Time Mode times are calculated from the current Home City Time in the

Timekeeping Mode using UTC time offset values.

•The UTC offset is a value that indicates the time difference between a reference

point in Greenwich, England and the time zone where a city is located.

•The letters “ ” “UTC is the abbreviation for Coordinated Universal Time , which is the”

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s

rotation.

Auto Display

Auto Display continually changes the contents of the digital display.

To turn off Auto Display

Press any button to turn off Auto Display. This returns to the Timekeeping Mode.

To turn on Auto Display

In the Timekeeping Mode, hold down for about three seconds until the watchD

beeps.

Note

•Auto Display cannot be performed while a setting screen is on the display.

Specifications

Accuracy at normal temperature: ±30 seconds a month

Timekeeping: Hour, minutes, seconds, p.m. (PM), month, day, day of the week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Multi Time (one Home City Time and three Local Times); Daylight Saving

Time (summer time)/Standard Time

World Time: 48 cities (31 time zones) and Coordinated Universal Time

Other: Standard Time/Daylight Saving Time (summer time); Home Time City/

World Time City swapping

Alarms: 5 alarms (One-time or Daily), Hourly Time Signal

Countdown Timer

Measuring unit: 1/10 second

Input range: 1 second to 24 hours (1-second increments, 1-minute increments and

1-hour increments)

Stopwatch

Measuring unit: 1/100 second

Measuring capacity: 23:59' 59.99''

Measuring modes: Elapsed time, split time, two finishes

Illumination: LED (light-emitting diode); Selectable illumination duration

Other: Button operation tone on/off; Auto Display function

Battery: One lithium battery (Type: CR2025)

Approximately 10 years on type CR2025; 10 seconds of alarm operation,

1.5 seconds of illumination per day

City Code Table

•Based on data as of December 2008.

•The rules governing global times (UTC offset and GMT differential) and summer

time are determined by each individual country.

Pago Pago

Honolulu

Anchorage

Vancouver

Los Angeles

Edmonton

Denver

Mexico City

Chicago

New York

Santiago

Halifax

St. Johns

Rio De Janeiro

Fernando

Noronha

Praia

Lisbon

London

Madrid

Paris

Rome

Berlin

Stockholm

–11

–10

–9

–8

–7

–6

–5

–4

–3.5

–3

–2

–1

PPG

HNL

ANC

YVR

LAX

YEA

DEN

MEX

CHI

NYC

SCL

YHZ

YYT

RIO

FEN

RAI

UTC

LIS

LON

MAD

PAR

ROM

BER

STO

City

Code

UTC offset/

GMT Differential

City

Athens

Cairo

Jerusalem

Moscow

Jeddah

Tehran

Dubai

Kabul

Karachi

Delhi

Kathmandu

Dhaka

Yangon

Bangkok

Singapore

Hong Kong

Beijing

Taiepei

Seoul

Tokyo

Adelaide

Guam

Sydney

Noumea

Wellington

+3.5

+4.5

+5.5

+5.75

+6.5

+9.5

+10

+11

+12

ATH

CAI

JRS

MOW

JED

THR

DXB

KBL

KHI

DEL

KTM

DAC

RGN

BKK

SIN

HKG

BJS

TPE

SEL

TYO

ADL

GUM

SYD

NOU

WLG

City

Code

UTC offset/

GMT Differential

City

Produktspezifikationen

Marke:	Casio
Kategorie:	Armbanduhr
Modell:	AE-1000WD-1AVEF
Bandmaterial:	Edelstahl
Uhrmodus:	12 h / 24 h
Timer:	1/1s - 24h
Kalender:	Ja
Stoppuhr:	Ja
Gewicht:	40 g
Akku-/Batterietyp:	CR2025
Anzahl unterstützter Akkus/Batterien:	1
Material des Uhrengehäuses:	Harz
Abmessungen (BxTxH):	43.7 x 13.7 x 48.1 mm
LED-Hintergrundbeleuchtung:	Ja
Wasserdicht bis Tiefe:	100 m
Weckerfunktion:	Ja
Batterie Lebensdauer:	10 Jahr(e)
Weltzeitfunktion:	Ja
Akkurazität:	±30 Sek/Monat