Casio 5146 Bedienungsanleitung
Casio
Armbanduhr
5146
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio 5146 (6 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
Operation Guide 5146 5425
MO1407-EA © 2014 CASIO COMPUTER CO., LTD.
E-1
About This Manual
• Depending on the model of your watch, display text appears either as dark fi gures
on a light background or light fi gures on a dark background. All sample displays in
this manual are shown using dark fi gures on a light background.
• Button operations are indicated using the letters shown in the illustration.
• Note that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
Graphic (moves with seconds count)
Module 5146 only
Module 5425Module 5146
E-2
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ………………………………………………………………………… E-6
Timekeeping …………………………………………………………………………… E-8
To set the digital time and date ……………………………………………… E-9
To change the Daylight Saving Time (summer time) setting ………………E-12
Stopwatch ………………………………………………………………………………E-14
To specify a distance value ……………………………………………………E-16
To specify lap time or split time readings ……………………………………E-18
To perform elapsed time measurement ………………………………………E-19
To set up the stopwatch to take lap time readings …………………………E-20
To perform a lap time measurement …………………………………………E-21
To set up the stopwatch to take split time readings …………………………E-22
To perform a split time measurement …………………………………………E-23
To measure times with the stopwatch ………………………………………E-24
E-4
Countdown Timer………………………………………………………………………E-25
To use the countdown timer ……………………………………………………E-26
To confi gure countdown start time and auto-repeat settings ………………E-27
World Time ………………………………………………………………………………E-29
To view the current time in another time zone ………………………………E-30
To toggle a city code time between Standard Time and Daylight
Saving Time …………………………………………………………………E-31
To swap your Home City and World Time City ………………………………E-32
Alarms ……………………………………………………………………………………E-33
To set an alarm time ……………………………………………………………E-34
To turn an alarm on and off ……………………………………………………E-36
To turn the Hourly Time Signal on and off ……………………………………E-37
E-5
Illumination ……………………………………………………………………………E-38
To illuminate the display manually ……………………………………………E-38
To specify the illumination duration……………………………………………E-39
To turn the auto light switch on and off ………………………………………E-41
Hand Home Position Correction ……………………………………………………E-42
To adjust home positions ………………………………………………………E-42
Reference ………………………………………………………………………………E-44
Specifi cations …………………………………………………………………………E-48
E-6
Timekeeping Mode
Press .&
General Guide
• Press & to change from mode to mode.
• In any mode (except a setting mode), press % to illuminate the display.
E-7
Alarm Mode (page E-33)
Countdown Timer Mode (page E-25)
World Time Mode (page E-29)
Stopwatch Mode (page E-14)
E-8
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
• The analog time of this watch is synchronized with the digital time. The analog time
setting is adjusted automatically whenever you change the digital time.
• If the analog time does not match the digital time for any reason, use the procedure
described under “To adjust home positions” (page E-42) to match the analog
setting to the digital setting.
• Pressing
' in the Timekeeping Mode toggles digital display between the Home
City Date and Home City Time.
'
Home City Date Home City Time
Month Day Seconds
Day of wee
k
Hour : Minutes Seconds
PM indicator
Day of week
E-9
To set the digital time and date
1. In the Timekeeping Mode, hold down $ for about three
seconds until the currently selected city code fl ashes in
the upper digital display. This is the setting mode.
2. Use ' (east) and % (west) to select the city code you
want.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the “City
Code Table” at the back of this manual.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Hour : Minutes
City code
PM indicator Second
s
Operation Guide 5146 5425
E-10
3. Press & to change the fl ashing screen content in the sequence shown below to
select the other settings.
Seconds
12/24-Hour
Format Hour
Minutes
DST
Month Year
City Code
Day
Illumination
Duration
4. When the setting you want to change is fl ashing, use ' or % to change it as
described below.
Screen: To do this: Do this:
Change the city code Use
' (east) and % (west).
Toggle the DST setting between
Daylight Saving Time (
on ) and
Standard Time (OFF).
Press '.
Toggle between 12-hour (
12H) and
24-hour (24H) timekeeping Press '.
E-11
Screen: To do this: Do this:
Reset the seconds to 00 Press '.
Change the hour and minutes
Use ' (+) and % (–).
Change the year, month, or day
Toggle the display illumination
duration between 1.5 seconds (
LT1)
and three seconds (
LT3)
Press '.
5. Press $ to exit the setting mode.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
E-12
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down $ for about three
seconds until the currently selected city code fl ashes in
the upper digital display. This is the setting mode.
2. Press &. This will display the DST setting screen.
3. Use ' to toggle the DST setting on ( on) and off (OFF).
• The default DST setting is off (OFF).
4. When the setting you want is selected, press $ to exit
the setting mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
E-13
12-hour and 24-hour timekeeping
• With the 12-hour format, the PM indicator (
P) appears for times in the range of noon
to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59
a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
the PM indicator (P).
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
E-14
Stopwatch
You can use the stopwatch to measure elapsed time, lap
times and split times. If you specify a distance value, the
stopwatch also will calculate and display speeds.
• The digital display range of the stopwatch is 99 hours,
59 minutes, 59.999 seconds. The stopwatch continues
to run until you stop it. If it reaches the above limit, it will
restart the time measurement from zero.
• The stopwatch operation continues even if you exit the
Stopwatch Mode. If you exit the Stopwatch Mode while
a stopwatch operation is in progress, the segments
along the top of the upper digital display (upper display
segments) will indicate the seconds of the current time.
Each segment represents one second. This is to let you
know that a stopwatch operation is in progress.
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing
& (page
E-7).
Speed hand
Upper display
segments
E-15
Important!
• Check to make sure that the speed hand is not moving before you perform any
Stopwatch Mode button operation.
Specifying a Distance Value
You can use the procedure below to specify a distance value, if you want. If you
specify a distance value, the watch will calculate and indicate speed for certain
stopwatch operations.
• The distance value represents kilometers, miles, or any other distance unit you
want. Specifying a distance value of 10.0, for example, can mean 10.0 kilometers
or 10.0 miles.
• No speed calculation is performed when 0.0 is specifi ed as the current distance
value.
• For lap time readings, you can specify either the lap distance (when all the laps are
the same distance) or the total race distance.
• For split time readings, you can specify the total race distance only. Though the
watch will indicate a speed each time you take a split reading, they will be based
on the total race distance, and so they will not indicate actual intermediate split
speeds.
E-16
To specify a distance value
1. In the Stopwatch Mode, make sure the stopwatch is
stopped and reset to all zeros.
• If you need to reset the stopwatch to all zeros, press $.
2.
Hold down $
for about three seconds until the current
distance value setting fl ashes in the lower digital display.
• This is the distance value setting mode.
3. Press & to move the fl ashing between the values on
the left side and right side of the distance value decimal
point.
4. While a distance value is fl ashing, use
' (+) and % (–)
to change it.
• You can specify a distance value in the rang e of 0.1
to 99.9.
5. After specifying the distance value you want, press $
to exit the setting mode.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-17
How speed is indicated
• While an elapsed time measurement operation is being
performed in the Stopwatch Mode, the watch will
indicate a speed value, which is calculated based on
the distance you specifi ed and the elapsed time.
The speed value is indicated as described below.
Speed hand: Up to 100
Upper display segments: 100 unit
A 1000 indicator points to 1000 (located to the right of
the upper display segments) when the speed value
exceeds 1000.
• The speed hand indicates speed values less than 100.
Only even-numbered values are indicated.
•
Speed can be indicated from 0 to 1998.
OVER is indicated
by the speed hand when the speed exceeds 1998.
Example:
When the speed value is 1,740.
Speed hand: Indicates 40.
Upper display segments: Indicate 700.
1000 indicator: Displayed
Speed hand
(Up to 100)
Segments
(100 unit)
OVER
1000 indicator
E-18
Time Measurement
You need to specify either lap time (page E-20) or split time (page E-22) measurement
before you start a stopwatch operation.
•If you want to measure total elapsed time, select split time measurement.
To specify lap time or split time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
• Make sure that LAP (lap times) or (split times) is shown in the lower digital SPL
display.
• If you need to reset the stopwatch to all zeros, press $.
2. You can toggle between LAP (lap times) and SPL (split times) by pressing $.
$
E-19
Elapsed Time Measurement
Use the following procedure to measure elapsed time, without taking lap time or split
time readings.
To perform elapsed time measurement
Select split time (SPL) measurement and then perform the following button operations.
' Start ➝ ' Stop ➝ $ Reset
•If you have a distance value (page E-15) specifi ed for the current elapsed time
measurement, the upper display segments and speed hand will indicate the speed
when you press ' to stop the elapsed time operation.
•After pressing ' to stop an elapsed time operation, you could press ' again to
restart from the point where you left off.
Operation Guide 5146 5425
E-20
Lap Time
A lap time reading shows the time elapsed since the last
lap time reading was taken.
•If you want the watch to calculate the speed of each lap
(when all of the laps are the same distance), specify the
lap distance for the distance setting (page E-15).
•If you want the watch to calculate the speed of the
entire race, specify the race distance for the distance
setting (page E-15). A speed will be indicated each
time you take a lap reading, but these lap speeds will
not indicate actual speed of the entire race.
To set up the stopwatch to take lap time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
• If you need to reset the stopwatch to all zeros, press $.
2. Make sure that (lap times) is shown in the lower digital display.LAP
• If (split times) is displayed, press SPL $ to toggle it to .LAP
Lap time
E-21
To perform a lap time measurement
Select lap time ( ) measurement and then perform the LAP
following button operations.
' Start ➝ $ Lap* ➝ $ Lap* ➝
' Stop ➝ $ Reset
* Normal elapsed time measurement reappears after
about 12 seconds.
• You can press $ to take lap readings as many times
as you like.
• While a lap time is displayed, the upper digital display
will alternate between the lap number (
#01 to #99) and
the lap hour value. If you take more than 99 lap
readings, the lap number will restart from #00 following
lap #99.
• Pressing ' to stop elapsed time measurement
displays the time (and speed if a distance is specifi ed)
of the fi nal lap.
Lap number
Speed hand
(calculated)
Minutes
Seconds
1/1000
second
s
Hours
E-22
Split Time
A split time reading shows the time elapsed since the
beginning of the current time measurement.
• If you want the watch to calculate the speed of the race,
specify the race distance for the distance setting (page
E-15).
• For split time readings, you can specify the total race
distance only. Though the watch will indicate a speed
each time you take a split reading, they will be based
on the total race distance, and so they will not indicate
actual intermediate split speeds.
To set up the stopwatch to take split time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
• If you need to reset the stopwatch to all zeros, press $.
2. Make sure that (split times) is shown in the lower digital display.SPL
• If (lap times) is displayed, press LAP $ to toggle it to .SPL
Split time
E-23
To perform a split time measurement
Select split time ( ) measurement and then perform the SPL
following button operations.
' Start ➝ $ Split ➝ $ Split Release*
➝
' Stop ➝ $ Reset
* The split time is released automatically if you do not
press $ within about 12 seconds.
• You can press $ to take split readings as many times
as you like.
• The stopwatch continues elapsed time measurement
internally while a split time reading is displayed.
• Pressing $ while a split time is displayed will switch
back to normal elapsed time measurement. The
elapsed time will appear in the lower digital display.
• You also could press ' to stop elapsed time
measurement instead.
• Pressing ' to stop elapsed time measurement
displays the time (and speed if a distance is specifi ed)
of the fi nal split (which is the overall elapsed time).
Hours
1/1000
second
s
Minutes
Seconds
Speed hand (calculated)
E-24
To measure times with the stopwatch
Elapsed Time
D D A
Start Stop Reset
Lap Time
D A A D A
Start
(LAP displayed)
Lap
(Lap01)
Lap
(Lap02)
Stop Reset
Split Time
D A A D A
Start
(SPL displayed)
Split Split release Stop Reset
E-25
Countdown Timer
You can set the countdown start time within a range of
one minute to 24 hours. An alarm sounds when the
countdown reaches zero.
• You also can select auto-repeat, which automatically
restarts the countdown from the original value you set
whenever zero is reached.
• All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
& (page E-7).
Second
s
Auto-repeat off
Start time
(Hours : Minutes)
E-26
To use the countdown timer
Press ' while in the Countdown Timer Mode to start the countdown timer.
• When the end of the countdown is reached, the alarm will sound for 10 seconds or
until you stop it by pressing any button.
• The countdown time is reset to its starting value automatically after the alarm stops
if auto-repeat is turned off.
• When auto-repeat is turned on, the countdown will restart automatically without
pausing when it reaches zero.
• The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
• Press ' while a countdown operation is in progress to pause it.
• Press ' again to resume the countdown.
• To stop a countdown timer operation completely, fi rst pause it (by pressing '),
and then press $. This returns the countdown time to its starting value.
E-27
To confi gure countdown start time and auto-repeat settings
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down $ for about three
seconds until the hour setting of the countdown start
time starts to fl ash. This is the setting mode.
• If the countdown start time is not displayed, use
the procedure under “To use the countdown timer”
(page E-26) to display it.
2. Press & to move the fl ashing in the sequence shown
below, and select the setting you want to change.
Start Time
(Minutes)
Auto-Repeat
On/Off
Start Time
(Hours)
3. Perform the following operations, depending on which setting currently is selected
on the display.
• While the start time setting is fl ashing, use (+) and ' % (–) to change it.
• While the auto-repeat on/off setting is fl ashing on the display, press ' to
toggle auto-repeat on ( ) and off ( ).
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Start time
(Hours : Minutes)
Auto-repeat on
E-28
4. Press $ to exit the setting mode.
• The auto-repeat on ( ) is displayed on the Countdown Timer Mode screen while
this function is turned on.
E-29
World Time
World Time digitally displays the current time in one of
48 cities (29 time zones) around the world. A simple
operation swaps your Home City with the currently
selected World Time City.
• The times kept in the World Time Mode are
synchronized with the time being kept in the
Timekeeping Mode. If you feel that there is an error in
any World Time Mode time, check to make sure you
have the correct city selected as your Home City. Also
check to make sure that the current time as shown in
the Timekeeping Mode is correct.
• Times in the World Time Mode are based on UTC
offsets. See the “City Code Table” at the back of this
manual for information about the UTC offsets that are
supported.
• All of the operations in this section are performed in the World Time Mode, which
you enter by pressing & (page E-7).
Currently selected
World Time City
World Time
Produktspezifikationen
| Marke: | Casio |
| Kategorie: | Armbanduhr |
| Modell: | 5146 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Casio 5146 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Armbanduhr Casio
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
20 Juni 2024
2 Juni 2024
2 Juni 2024
Bedienungsanleitung Armbanduhr
- Armbanduhr Crivit
- Armbanduhr Nedis
- Armbanduhr Beper
- Armbanduhr Velleman
- Armbanduhr IKEA
- Armbanduhr ADE
- Armbanduhr Auriol
- Armbanduhr Denver
- Armbanduhr Eurochron
- Armbanduhr Irox
- Armbanduhr Prologue
- Armbanduhr Renkforce
- Armbanduhr Sempre
- Armbanduhr Braun
- Armbanduhr Polar
- Armbanduhr Alpina
- Armbanduhr Topcom
- Armbanduhr Geemarc
- Armbanduhr Seiko
- Armbanduhr Calypso
- Armbanduhr Fossil
- Armbanduhr Garmin
- Armbanduhr Jaguar
- Armbanduhr Lotus
- Armbanduhr Michael Kors
- Armbanduhr Skagen
- Armbanduhr Withings
- Armbanduhr Citizen
- Armbanduhr Dugena
- Armbanduhr Habitat
- Armbanduhr Karlsson
- Armbanduhr Krontaler
- Armbanduhr Leff
- Armbanduhr Mondaine
- Armbanduhr Epson
- Armbanduhr Suunto
- Armbanduhr Guardo
- Armbanduhr Swatch
- Armbanduhr Tissot
- Armbanduhr Adidas
- Armbanduhr Lorus
- Armbanduhr Maurice Lacroix
- Armbanduhr Huawei
- Armbanduhr Omega
- Armbanduhr Kogan
- Armbanduhr TomTom
- Armbanduhr Grand Seiko
- Armbanduhr Fitbit
- Armbanduhr Armani
- Armbanduhr Bering
- Armbanduhr Breitling
- Armbanduhr Breo
- Armbanduhr Bulova
- Armbanduhr Christiaan Van Der Klaauw
- Armbanduhr Cover
- Armbanduhr Daniel Steiger
- Armbanduhr Davis
- Armbanduhr Detomaso
- Armbanduhr Diesel
- Armbanduhr Ebel
- Armbanduhr Festina
- Armbanduhr Gant
- Armbanduhr Girard-Perregaux
- Armbanduhr Guess
- Armbanduhr Hamilton
- Armbanduhr Holzkern
- Armbanduhr Hugo Boss
- Armbanduhr Ice Watch
- Armbanduhr Invicta
- Armbanduhr IWC
- Armbanduhr Junghans
- Armbanduhr KHS
- Armbanduhr Lexor
- Armbanduhr Nixon
- Armbanduhr Orient
- Armbanduhr Pulsar
- Armbanduhr Puma
- Armbanduhr Sinn
- Armbanduhr Stührling
- Armbanduhr Swiss Military Hanowa
- Armbanduhr Swiza
- Armbanduhr Timex
- Armbanduhr Torgoen
- Armbanduhr Tudor
- Armbanduhr TW Steel
- Armbanduhr Zenith
- Armbanduhr Victorinox
- Armbanduhr ETT
- Armbanduhr Boss
- Armbanduhr La Crosse Technology
- Armbanduhr Oregon Scientific
- Armbanduhr Spin Master
- Armbanduhr TicWatch
- Armbanduhr Digi-tech
- Armbanduhr Ferrari
- Armbanduhr Lambretta
- Armbanduhr Misfit
- Armbanduhr Movado
- Armbanduhr Rolex
- Armbanduhr Sigma Sport
- Armbanduhr Skmei
- Armbanduhr Tommy Hilfiger
- Armbanduhr Shinola
- Armbanduhr Sekonda
- Armbanduhr Emporio Armani
- Armbanduhr Philip Watch
- Armbanduhr Brera
- Armbanduhr Earnshaw
- Armbanduhr So & Co
- Armbanduhr Stauer
- Armbanduhr LIV
- Armbanduhr Fromanteel
- Armbanduhr Triwa
- Armbanduhr Nautica
- Armbanduhr Obaku
- Armbanduhr Hublot
- Armbanduhr Linjer
- Armbanduhr X-WATCH
- Armbanduhr Tikkers
- Armbanduhr Audemars Piguet
- Armbanduhr Pilgrim
- Armbanduhr MICHELE
- Armbanduhr WoodWatch
- Armbanduhr Rotary
Neueste Bedienungsanleitung für -Kategorien-
Zenith Elite Classic 03.2290.679/51.C700 Bedienungsanleitung
19 August 2024
16 August 2024
12 August 2024
10 August 2024
9 August 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024