Casio 3439 Bedienungsanleitung
Casio
Armbanduhr
3439
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Casio 3439 (12 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
MO1503-EA © 2015 CASIO COMPUTER CO., LTD.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
Applications
The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
Measured values are then shown on the display. Such features make this watch useful when hiking,
mountain climbing, or when engaging in other such outdoor activities.
Warning !
• The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
•
When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
E-2
Important!
• The watch’s Altimeter Mode calculates and displays relative altitude based on barometric pressure
readings produced by its pressure sensor. This means that readings taken at different times at the
same location may produce different altitude values due to changes in barometric pressure. Also note
that the value displayed by the watch may be different from the actual elevation and/or sea level
elevation indicated for the area where you are located.
• When using the altimeter of this watch for mountain climbing or other activities, it is highly
recommended that you check a map, local altitude indications, or some other source for your current
correct altitude and regularly calibrate the altimeter with the latest information. For more information,
see “To specify a reference altitude value” (page E-47).
• Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or other
activities, be sure always to take along another compass to confi rm readings. If the readings produced
by the digital compass of this watch are different from those of the other compass, perform bidirectional
calibration of the digital compass to ensure more accurate readings.
• Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a
permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or
electrical household appliances (TV, computer, cellphone, etc.)
E-3
About This Manual
• Depending on the model of your watch, digital display text appears
either as dark fi gures on a light background, or light fi gures on a dark
background. All examples in this manual are shown using dark fi gures
on a light background.
• Button operations are indicated using the letters shown in the
illustration.
• Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.
E-4
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City and summer time settings” (page E-14) to confi gure
your Home City and daylight saving time settings.
Important!
• World Time Mode and Sunrise/Sunset Mode data depend on correct Home City, time, and date settings
in the Timekeeping Mode. Make sure you confi gure these settings correctly.
2. Set the current time.
See “Confi guring Current Time and Date Settings” (page E-16).
The watch is now ready for use.
E-5
Contents
About This Manual …………………………………………………………………………………………… E-3
Things to check before using the watch ………………………………………………………………… E-4
Mode Reference Guide ……………………………………………………………………………………… E-9
Timekeeping ………………………………………………………………………………………………… E-13
Confi guring Home City Settings ………………………………………………………………………… E-14
To confi gure Home City and summer time settings ……………………………………………… E-14
Confi guring Current Time and Date Settings ………………………………………………………… E-16
To change the current time and date settings …………………………………………………… E-16
Taking Direction Readings ……………………………………………………………………………… E-19
To take a direction reading ………………………………………………………………………… E-19
To perform bidirectional calibration ………………………………………………………………… E-23
To perform magnetic declination correction ……………………………………………………… E-24
To store a direction angle reading in Bearing Memory ………………………………………… E-25
Specifying Temperature, Barometric Pressure, and Altitude Display Units …………………… E-29
To specify temperature, barometric pressure, and altitude display units ……………………… E-29
Taking Barometric Pressure and Temperature Readings ………………………………………… E-31
To take barometric pressure and temperature readings ………………………………………… E-31
To enable or disable the barometric pressure change alert …………………………………… E-37
To calibrate the pressure sensor and the temperature sensor ………………………………… E-38
E-6
Using the Altimeter Mode ………………………………………………………………………………… E-40
To select the altitude screen format ……………………………………………………………… E-42
To select the altitude auto reading interval ……………………………………………………… E-43
To take altitude readings …………………………………………………………………………… E-45
To specify a reference altitude value ……………………………………………………………… E-47
To specify the altitude differential start point ……………………………………………………… E-48
To use the altitude differential value ……………………………………………………………… E-49
To save a reading manually ………………………………………………………………………… E-50
To start trek log value updating …………………………………………………………………… E-53
To stop trek log value updating …………………………………………………………………… E-53
Viewing Altitude Records ………………………………………………………………………………… E-58
To view altitude records …………………………………………………………………………… E-58
To delete all manually saved data ………………………………………………………………… E-62
To delete data in a specifi c memory area ………………………………………………………… E-62
Looking up Sunrise and Sunset Times ………………………………………………………………… E-64
To enter the Sunrise/Sunset Mode ………………………………………………………………… E-64
To view the sunrise/sunset time for a particular date …………………………………………… E-65
To look up the sunrise and sunset times for a specifi c location ………………………………… E-66
Using the Stopwatch ……………………………………………………………………………………… E-68
To enter the Stopwatch Mode ……………………………………………………………………… E-68
To perform an elapsed time operation …………………………………………………………… E-68
To pause at a split time ……………………………………………………………………………… E-68
To measure two fi nishes …………………………………………………………………………… E-69 E-7
Using the Countdown Timer ……………………………………………………………………………… E-70
To enter the Countdown Timer Mode ……………………………………………………………… E-70
To specify the countdown start time ……………………………………………………………… E-70
To perform a countdown timer operation ………………………………………………………… E-71
To stop the alarm …………………………………………………………………………………… E-71
Using the Alarm …………………………………………………………………………………………… E-72
To enter the Alarm Mode …………………………………………………………………………… E-72
To set an alarm time ………………………………………………………………………………… E-73
To turn an alarm and the Hourly Time Signal on and off………………………………………… E-74
To stop the alarm …………………………………………………………………………………… E-75
Checking the Current Time in a Different Time Zone ………………………………………………… E-76
To enter the World Time Mode …………………………………………………………………… E-76
To view the time in another time zone …………………………………………………………… E-76
To specify standard time or daylight saving time (DST) for a city ……………………………… E-77
Illumination ………………………………………………………………………………………………… E-78
To turn on illumination manually …………………………………………………………………… E-78
To change the illumination duration ……………………………………………………………… E-78
To turn the auto light switch on and off …………………………………………………………… E-80
Button Operation Tone …………………………………………………………………………………… E-82
To turn the button operation tone on and off ……………………………………………………… E-82
Operation Guide 3439
E-8
Low Battery Indication …………………………………………………………………………………… E-83
Troubleshooting …………………………………………………………………………………………… E-84
Specifi cations ……………………………………………………………………………………………… E-89
E-9
Mode Reference Guide
Your watch has 10 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current date in the Home City
• Confi gure Home City and daylight saving time (DST) settings
• Confi gure time and date settings
Timekeeping Mode E-13
Determine your current bearing or the direction from your current location
to a destination Digital Compass Mode E-19
• View the barometric pressure and temperature at your current location
• View a graph of barometric pressure readings
Barometer/Thermometer
Mode E-31
• View the altitude at your current location
• Determine the altitude differential between two locations (reference
point and current location)
• Record an altitude reading with the reading time and date
Altimeter Mode E-40
View the sunrise and sunset times for a specifi c date Sunrise/Sunset Mode E-64
Recall records created in the Altimeter Mode Data Recall Mode E-58
Use the stopwatch to measure elapsed time Stopwatch Mode E-68
Use the countdown timer Countdown Timer Mode E-70
Set an alarm time Alarm Mode E-72
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-76
E-10
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between modes.
• To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.
Alarm Mode
Stopwatch Mode
World Time
Mode
Timekeeping Mode
Sunrise/Sunset
Mode
Data Recall
Mode
Countdown
Timer Mode Alarm Mode
Stopwatch Mode
World Time
Mode
Timekeeping Mode
Sunrise/Sunset
Mode
Data Recall
Mode
Countdown
Timer Mode
E-11
• You can use buttons A,B, and C to enter a sensor mode directly from the Timekeeping Mode or
from another sensor mode. To enter a sensor mode from the Sunrise/Sunset, Data Recall, Alarm,
Stopwatch, Countdown Timer or World Time, fi rst enter the Timekeeping Mode and then press the
applicable button.
Altimeter Mode
Barometer/
Thermometer ModeDigital Compass Mode
Sensor Modes
Altimeter Mode
Barometer/
Thermometer ModeDigital Compass Mode
Sensor Modes
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
• To enter the Timekeeping Mode from any other mode, hold down
D for about two seconds.
Auto Return Features
• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation
for a particular amount of time in each mode.
Mode Name Approximate Elapsed Time
Sunrise/Sunset, Data Recall, Alarm, Digital Compass 3 minutes
Altimeter 1 hour minimum
12 hours maximum
Barometer/Thermometer 1 hour
Setting screen (digital setting fl ashing) 3 minutes
• If you leave a screen with fl ashing digits on the display for two or three minutes without performing any
operation, the watch exits the setting screen automatically.
Initial Screens
When you enter the Data Recall, Alarm, World Time, or Digital Compass Mode, the data you were viewing
when you last exited the mode appears fi rst.
Scrolling
The A and C buttons are used on the setting screen to scroll through data on the display. In most
cases, holding down these buttons during a scroll operation scrolls through the data at high speed.
E-13
Timekeeping
Use the Timekeeping Mode (TIME) to set and view the current time and date.
• Each press of E in the Timekeeping Mode will change screen contents as shown below.
Day of the Week/Date Screen Month/Day Screen Barometric Pressure
Graph Screen
Barometric pressure graph
Day of week
Seconds
Hour :
Minutes
Day
PM
indicator
Month Day
E-14
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or
daylight saving time (DST).
To confi gure Home City and summer time settings
1. In the Timekeeping Mode, hold down E for at least two seconds.
First, SET Hold will fl ash on the display, and CITY will be displayed in
the upper display. After that, the currently selected city code and city
name will scroll across the upper display. Keep E depressed until the
scrolling starts.
• The watch will exit the setting mode automatically if you do not
perform any operation for about two or three minutes.
• For details about city codes, see the “City Code Table” at the back
of this manual.
2. Use A (East) and C (West) to scroll through the available city codes.
• Keep scrolling until the city code you want to select as your Home
City is displayed.
3. Press D to display the DST setting screen.
4.
Press A to toggle the DST setting between Daylight Saving Time (
ON)
and standard time (
OFF ).
• Note that you cannot switch between standard time and daylight
saving time (DST) while UTC is selected as your Home City.
PM
indicator
City code
Hour :
Minutes
DST indicator
Seconds
PM
indicator
City code
Hour :
Minutes
DST indicator
Seconds E-15
5. After all of the settings are the way you want, press E twice to exit the setting screen.
• Daylight Saving Time is turned on when the indicator is on the display.DST
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Operation Guide 3439
E-16
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
To change the current time and date settings
1. In the Timekeeping Mode, hold down E for at least two seconds.
First, SET Hold will fl ash on the display, and CITY will be displayed in
the upper display. After that, the currently selected city code and city
name will scroll across the upper display. Keep E depressed until the
scrolling starts.
PM
indicator
City code
Hour :
Minutes
PM
indicator
City code
Hour :
Minutes
E-17
2. Press D to move the fl ashing in the sequence shown below to select the other settings.
City Code DST
Thermometer/Barometer/
Altitude display unit
Illumination
Duration
Button Operation
Tone Day Month
12/24-Hour
Format Seconds Hour Minutes Year
• The following steps explain how to confi gure timekeeping settings only.
3. When the timekeeping setting you want to change is fl ashing, use A and/or C to change it as
described below.
Screen To do this: Do this:
Change the city code Use
A (East) and C (West).
Toggle between Daylight Saving Time (
ON) and
Standard Time (
OFF). Press A.
Toggle between 12-hour (
12H) and 24-hour (24H)
timekeeping. Press A.
Reset the seconds to
00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Press A.
Change the hour or minutes
Use A (+) and C (–).
Change the year, month, or day
4. After all of the settings are the way you want, press
E twice to exit the setting screen.
E-18
Note
• For information about selecting a Home City and confi guring the DST setting, see “Confi guring
Home City Settings” (page E-14).
• While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from
noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,
time is displayed from 0:00 to 23:59, without any P (PM) indicator.
• The watch’s built-in full automatic calendar makes allowances for different month lengths and leap
years. Once you set the date, there should be no reason to change it except after you have the
watch’s battery replaced.
• The day of the week changes automatically as the date and/or year changes. Make sure that your
date and year settings are correct.
• Refer to the pages shown below for more information on Timekeeping Mode settings.
- Button operation tone on/off: “To turn the button operation tone on and off” (page E-82)
- Illumination duration setting: “To change the illumination duration” (page E-78)
- Changing the temperature, barometric pressure, and altitude display units (for a city code other
than TYO): “To specify temperature, barometric pressure, and altitude display units” (page E-29)
E-19
Taking Direction Readings
You can use the Digital Compass Mode to determine the direction of north, and to check your bearing to a
destination.
• For information about what you can do to improve digital compass reading accuracy, see “Calibrating
the Bearing Sensor” (page E-22) and “Digital Compass Precautions” (page E-27).
To take a direction reading
1. Make sure the watch is in the Timekeeping Mode or any one of the sensor modes.
• The sensor modes are: Digital Compass Mode, Barometer/Thermometer Mode, and Altimeter
Mode.
2. Place the watch on a fl at surface. If you are wearing the watch, make sure that your wrist is horizontal
(in relation to the horizon).
3. Point the 12 o’clock position of the watch in the direction whose reading you want to take.
4. Press C to start.
• COMP will appear in the upper display to indicate that a digital compass operation is in progress.
• About one second after you press C, pointers (three graphic segments for north, one graphic
segment each for south, east, and west) will appear on the display to indicate north, south, east,
and west. Direction will also be indicated by literal direction indicators and by a direction angle.
E-20
315°
0°
Objective Bearing Indication
Meaning
N: North
E: East
W: West
S: South
Bearing to objective:
Northwest
Bearing angle
to objective
North
Note
• If the four pointers (north, south, east, west) and the direction indicating letters do not appear
on the display when you press C, it could mean that the watch is displaying bearing memory
information. If this happens, press E to delete the current bearing memory contents. For more
information, see “Using Bearing Memory” (page E-25).
• To return to the Timekeeping Mode, press D.
Pressing D will return to the Timekeeping Mode even is a reading operation is in progress.
E-21
Important!
• If the digital display contents start to fl ash after you perform a reading operation, it means that abnormal
magnetism has been detected. Move away from any potential source of strong magnetism and try
taking a reading again. If the problem occurs when you try again, continue to keep away from the
source of strong magnetism, perform bidirectional calibration, and then try taking a reading again. For
more information, refer to “To perform bidirectional calibration” (page E-23) and “Location” (page E-27).
Digital Compass Readings
• When you press Cto start digital compass reading operation, COMP will initially appear on the
display to indicate that a digital compass operation is in progress.
• After the fi rst reading is obtained, the watch will continue to take digital compass readings automatically
each second for up to 60 seconds. After that, the reading operation will stop automatically.
• The direction indicator and angle value will show
- - - to indicate that digital compass readings are
complete.
• The auto light switch is disabled during the 60 seconds that digital compass readings are being taken.
• The margin of error for the angle value and the direction indicator is ±11 degrees while the watch is
horizontal (in relation to the horizon). If the indicated direction is northwest (
NW) and 315 degrees, for
example, the actual direction can be anywhere from 304 to 326 degrees.
• Note that taking a direction reading while the watch is not horizontal (in relation to the horizon) can
result in large direction reading error.
•
You can calibrate the bearing sensor if you suspect the direction reading is incorrect.
• Any ongoing direction reading operation is paused temporarily while the watch is performing an alert
operation (daily alarm, Hourly Time Signal, countdown timer alarm) or while illumination is turned on (by
pressing L). The direction reading operation resumes for its remaining duration after the operation
that caused it to pause is fi nished.
• See “Digital Compass Precautions” (page E-27) for important information about taking direction readings.
E-22
Calibrating the Bearing Sensor
You should calibrate the bearing sensor whenever you feel that the direction readings being produced by
the watch are off. You can use any one of two different bearing sensor calibration methods: bidirectional
calibration or magnetic declination correction.
• Bidirectional Calibration
Bidirectional calibration calibrates the bearing sensor in relation to magnetic north. Use bidirectional
calibration when you want to take readings within an area exposed to magnetic force. This type of
calibration should be used if the watch becomes magnetized for any reason.
Important!
• To ensure correct direction readings by this watch, be sure to perform bidirectional calibration before
using it. The watch may produce incorrect direction readings if you do not perform bidirectional
calibration.
• Magnetic Declination Correction
With magnetic declination correction, you input a magnetic declination angle (difference between
magnetic north and true north), which allows the watch to indicate true north. You can perform this
procedure when the magnetic declination angle is indicated on the map you are using. Note that you can
input the declination angle in whole degree units only, so you may need to round off the value specifi ed
on the map. If your map indicates the declination angle as 7.4°, you should input 7°. In the case of 7.6°
input 8°, for 7.5° you can input 7° or 8°.
Precautions about bidirectional calibration
• You can use any two opposing directions for bidirectional calibration. You must, however, make sure
that they are 180 degrees opposite each other. Remember that if you perform the procedure
incorrectly, you will get wrong bearing sensor readings.
• Do not move the watch while calibration of either direction is in progress.
E-23
• You should perform bidirectional calibration in an environment that is the same as that where you plan
to be taking direction readings. If you plan to take direction readings in an open fi eld, for example,
calibrate in an open fi eld.
To perform bidirectional calibration
1. In the Digital Compass Mode, hold down E for at least two seconds.
First, SET Hold
will fl ash on the display. After that, CALIBRATION will
scroll across the upper display. Keep E depressed until
CALIBRATION starts scrolling.
• At this time, the north pointer fl ashes at the 12 o’clock position
and the display will show -1- to indicate that the watch is ready to
calibrate the fi rst direction.
2. Place the watch on a level surface facing any direction you want, and
press C to calibrate the fi rst direction.
• - - - is shown on the display while calibration is being performed.
When calibration is successful, will appear on the Turn 180°
display and three graphic segments ( ) will fl ash at 6 o’clock.
After about one second, CALIBRATION -2- will scroll across the
upper display.
• If ERR-1 appears on the display, press C again to restart the
direction reading operation.
3. Rotate the watch 180 degrees.
4. Press C again to calibrate the second direction.
• - - - is shown on the display while calibration is being performed.
When calibration is successful, the display will show and then OK
change to the Digital Compass Mode screen.
Operation Guide 3439
Produktspezifikationen
| Marke: | Casio |
| Kategorie: | Armbanduhr |
| Modell: | 3439 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Casio 3439 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Armbanduhr Casio
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
20 Juni 2024
2 Juni 2024
2 Juni 2024
Bedienungsanleitung Armbanduhr
- Armbanduhr Crivit
- Armbanduhr Nedis
- Armbanduhr Beper
- Armbanduhr Velleman
- Armbanduhr IKEA
- Armbanduhr ADE
- Armbanduhr Auriol
- Armbanduhr Denver
- Armbanduhr Eurochron
- Armbanduhr Irox
- Armbanduhr Prologue
- Armbanduhr Renkforce
- Armbanduhr Sempre
- Armbanduhr Braun
- Armbanduhr Polar
- Armbanduhr Alpina
- Armbanduhr Topcom
- Armbanduhr Geemarc
- Armbanduhr Seiko
- Armbanduhr Calypso
- Armbanduhr Fossil
- Armbanduhr Garmin
- Armbanduhr Jaguar
- Armbanduhr Lotus
- Armbanduhr Michael Kors
- Armbanduhr Skagen
- Armbanduhr Withings
- Armbanduhr Citizen
- Armbanduhr Dugena
- Armbanduhr Habitat
- Armbanduhr Karlsson
- Armbanduhr Krontaler
- Armbanduhr Leff
- Armbanduhr Mondaine
- Armbanduhr Epson
- Armbanduhr Suunto
- Armbanduhr Guardo
- Armbanduhr Swatch
- Armbanduhr Tissot
- Armbanduhr Adidas
- Armbanduhr Lorus
- Armbanduhr Maurice Lacroix
- Armbanduhr Huawei
- Armbanduhr Omega
- Armbanduhr Kogan
- Armbanduhr TomTom
- Armbanduhr Grand Seiko
- Armbanduhr Fitbit
- Armbanduhr Armani
- Armbanduhr Bering
- Armbanduhr Breitling
- Armbanduhr Breo
- Armbanduhr Bulova
- Armbanduhr Christiaan Van Der Klaauw
- Armbanduhr Cover
- Armbanduhr Daniel Steiger
- Armbanduhr Davis
- Armbanduhr Detomaso
- Armbanduhr Diesel
- Armbanduhr Ebel
- Armbanduhr Festina
- Armbanduhr Gant
- Armbanduhr Girard-Perregaux
- Armbanduhr Guess
- Armbanduhr Hamilton
- Armbanduhr Holzkern
- Armbanduhr Hugo Boss
- Armbanduhr Ice Watch
- Armbanduhr Invicta
- Armbanduhr IWC
- Armbanduhr Junghans
- Armbanduhr KHS
- Armbanduhr Lexor
- Armbanduhr Nixon
- Armbanduhr Orient
- Armbanduhr Pulsar
- Armbanduhr Puma
- Armbanduhr Sinn
- Armbanduhr Stührling
- Armbanduhr Swiss Military Hanowa
- Armbanduhr Swiza
- Armbanduhr Timex
- Armbanduhr Torgoen
- Armbanduhr Tudor
- Armbanduhr TW Steel
- Armbanduhr Zenith
- Armbanduhr Victorinox
- Armbanduhr ETT
- Armbanduhr Boss
- Armbanduhr La Crosse Technology
- Armbanduhr Oregon Scientific
- Armbanduhr Spin Master
- Armbanduhr TicWatch
- Armbanduhr Digi-tech
- Armbanduhr Ferrari
- Armbanduhr Lambretta
- Armbanduhr Misfit
- Armbanduhr Movado
- Armbanduhr Rolex
- Armbanduhr Sigma Sport
- Armbanduhr Skmei
- Armbanduhr Tommy Hilfiger
- Armbanduhr Shinola
- Armbanduhr Sekonda
- Armbanduhr Emporio Armani
- Armbanduhr Philip Watch
- Armbanduhr Brera
- Armbanduhr Earnshaw
- Armbanduhr So & Co
- Armbanduhr Stauer
- Armbanduhr LIV
- Armbanduhr Fromanteel
- Armbanduhr Triwa
- Armbanduhr Nautica
- Armbanduhr Obaku
- Armbanduhr Hublot
- Armbanduhr Linjer
- Armbanduhr X-WATCH
- Armbanduhr Tikkers
- Armbanduhr Audemars Piguet
- Armbanduhr Pilgrim
- Armbanduhr MICHELE
- Armbanduhr WoodWatch
- Armbanduhr Rotary
Neueste Bedienungsanleitung für -Kategorien-
Zenith Elite Classic 03.2290.679/51.C700 Bedienungsanleitung
19 August 2024
16 August 2024
12 August 2024
10 August 2024
9 August 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024