Casio 3252 Bedienungsanleitung
Casio
Armbanduhr
3252
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Casio 3252 (4 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war fĂĽr 59 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
Operation Guide 3189/3252
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-7
To input a new Data Bank record ........................................................................ E-12
To recall Data Bank records ................................................................................ E-15
To edit a Data Bank record .................................................................................. E-16
To delete a Data Bank record .............................................................................. E-16
To view the time in another city code ................................................................. E-17
To toggle a city code time between Standard Time and
Daylight Saving Time ........................................................................................ E-18
MA1012-EA
E
About This Manual
•Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•Button operations are indicated using the letters shown
in the illustration.
•Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
E-1
Contents
General Guide ......................................................................................................... E-4
Timekeeping ............................................................................................................ E-6
Data Bank .............................................................................................................. E-11
World Time ............................................................................................................ E-17
Day Counter .......................................................................................................... E-19
Alarms .................................................................................................................... E-23
Stopwatch .............................................................................................................. E-28
Countdown Timer ................................................................................................. E-30
Reference .............................................................................................................. E-32
Specifications ....................................................................................................... E-35
E-3
To set the target date ............................................................................................ E-20
To set an alarm time ............................................................................................. E-24
To test the alarm ................................................................................................... E-25
To turn an alarm on and off ................................................................................. E-26
To turn the Hourly Time Signal on and off ......................................................... E-27
To use the countdown timer ................................................................................ E-30
To set the countdown start time .......................................................................... E-31
To turn the button operation tone on and off ..................................................... E-32
E-4
General Guide
•Press C to change from mode to mode.
•Pressing L in any mode illuminates the display.
Timekeeping Mode World Time ModeData Bank Mode
Press .
E-5
•If you do not perform any operation for a few minutes while a setting screen (with
flashing digits) is on the display, the watch exits the setting screen automatically.
•If you do not perform any operation for a few minutes in the Alarm Mode, Day
Counter Mode, or Data Bank Mode, the watch reverts to the normal timekeeping
screen automatically.
Countdown
Timer Mode
Alarm Mode Stopwatch ModeDay Counter Mode
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
•Pressing A in the Timekeeping Mode will display the
currently selected Home City.
•Press to toggle between 12-hour and 24-hourD
formats.
•With 12-hour format, times between midnight and noon
are indicated by A (am), while times between noon and
midnight are indicated by P (pm).
•The and A P indicators do not appear when you are
using 24-hour format.
Year
Day of week
Seconds
Month – Day
Hour
PM indicator
Minutes
E-7
To set the time and date
1. While in the Timekeeping Mode, hold down A until the second’s digits flash on the
display, which indicates the setting screen.
2. Press C to move the flashing in the sequence shown below.
DSTSeconds
MonthDay
City code
Minutes
Year
Hour
E-8
3. While the seconds setting is selected (flashing), press D to reset it to 00. If you
press D while the seconds setting is in the range of 30 to 59, the seconds are
reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of
00 to 29, the minutes count is unchanged.
•While the DST* setting is selected (DST on indicator is flashing), press D to
toggle it on ( ) and off (On OF).
•The DST on/off setting you select for the Timekeeping Mode affects the World
Time Mode.
•While the city code setting is selected, use D B and to scroll through the
available codes until the one you want to use as your home time city is displayed.
•For full information on city codes, see the “City Code Table” at the back of this
manual.
4. While any other setting is selected (flashing), press D B to increase it or press to
decrease it. Holding down D or B scrolls at high speed.
5. Press A to exit the setting screen.
•The day of the week is set in accordance with the date automatically.
•The date can be set within the range of January 1, 2000 to December 31, 2099.
E-9
•The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years automatically. Once you set the date, there should be no
reason to change it except after replacement of the watch’s battery.
* See “Daylight Saving Time (DST) Setting” (page E-18) for details about the DST
setting.
Operation Guide 3189/3252
E-10
Backlight Precautions
The backlight uses an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark.
In any mode, press L to illuminate the display for about two seconds.
•The electro-luminescent panel that provides illumination loses power after very long
use.
•The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
•The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
•The backlight turns off automatically whenever an alarm sounds.
•Frequent use of the backlight shortens the battery life.
E-11
Data Bank
Mode indicator Name area
Remainin
g
free records Number area
Alternate at
the 1-second
interval.
The Data Bank Mode lets you store up to 25 records, each with a name (up to eight
characters) and a phone number (up to 12 digits). Entering the Data Bank Mode displays
a screen that shows the mode name (DB) and remaining memory capacity (number of
records) for a few moments. After that, the record you were viewing the last time you
exited the Data Bank Mode will appear. Anytime you input a new record, all records will
be sorted automatically into alphabetic sequence on the name.*
* A to Z, 0 to 9, symbols (, or -)
E-12
To input a new Data Bank record
1. In the Data Bank Mode, use D (+) and B (–) to scroll through the Data Bank
records and display the one you want to input data.
2. Hold down A until a cursor appears on the name area.
3. Use D and B to scroll through characters at the current cursor position.
Characters scroll in the sequence shown below.
(Space) A to Z 0 to 9 (Period) . - (Hyphen)
Press .
Press .
• Holding down D B or scrolls at high speed.
E-13
4. When the character you want is at the current cursor position, press C to move the
cursor to the right.
1st digit 8th digit
12th digit 1st digit
Name area
Number area
Press .
5. Repeat the steps 3 and 4 to input the rest of the characters.
•You can input up to eight characters for the name, though only three characters
are visible at a time.
•If the name you input has fewer than eight characters, use C to move the cursor
to the eighth space (which means you would press three times after inputtingC
a five-character name).
6. After you input the name, use C to move the cursor to the number area.
•Pressing C while the cursor is located at the eighth character of the name area
advances to the number area. Pressing while the cursor is located at the 12thC
digit of the number area returns to the name area.
E-14
7. Use D and B to scroll through characters (hyphen, numbers, space) at the
current cursor position on the number area. Characters scroll in the sequence
shown below.
(Space)
0 to 9 - (Hyphen)
Press .
Press .
•Holding down D B or scrolls characters at high speed.
8. When the character you want is at the cursor position, press C to move the cursor
to the right.
9. Repeat steps 7 and 8 to input the rest of the numbers you want.
•You can input up to 12 digits for the number.
E-15
10. After inputting the name and number of the record, press A to store it and exit
the setting screen.
•The display can show only three name characters at a time. Longer names scrolls
continuously from right to left. The symbol “ ” indicates that the character to the
left is the last, and the character to the right is the first.
To recall Data Bank records
In the Data Bank Mode, use (+) and (–) to scroll through Data Bank records onD B
the display.
•Holding down B D or scrolls at high speed.
E-16
To edit a Data Bank record
1.
In the
Data Bank
Mode, scroll through the records and display the one you want to edit.
2. Hold down A until the cursor appears in the display.
3. Use C to move the cursor to the character you want to change.
4. Use D and B to change the character.
•See step 3 of “To input a new Data Bank record” for information on inputting name
characters, and step 7 for inputting number characters.
5. After making the changes that you want, press A to store them and exit the setting
screen.
To delete a Data Bank record
1. In the Data Bank Mode, scroll through the records and display the one you want to
delete.
2. Hold down A until the cursor appears in the display.
3. Press B and D at the same time. The message “CLR” appears in the display,
indicating that the record was deleted.
•After the record is deleted, the cursor appears in the name area, ready for input.
4. Input a new record or press A to exit the setting screen.
E-17
World Time
World Time shows the current time in 30 cities (29 time
zones) around the world.
•All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C
(page E-4).
To view the time in another city code
In the World Time Mode, press to scroll through cityD
codes (time zones) to the east or to scroll to the west.B
•For full information about city codes, see the “City Code
Table” at the back of this manual.
•If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make the necessary changes.
Current time in the zone
of the selected city code
City code
Mode indicator
E-18
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use B and D to display the
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down A for about one second to toggle between
Daylight Saving Time ( indicator displayed) andDST
Standard Time (DST indicator not displayed).
DST indicator
•The DST indicator will appear on the display whenever you display a city code for
which Daylight Saving Time is turned on.
•Note that the DST/Standard Time setting affects only the currently displayed city
code. Other city codes are not affected.
E-19
Day Counter
The Day Counter Mode lets you count the number of days
from the Timekeeping Mode’s current date to a specific
target date.
This watch has five day counters. You can assign text
titles up to eight characters long to each of the five Day
Counters. Whenever the date specified by any one of the
day counters matches the date of the Timekeeping Mode
(regardless of the day counter’s year setting), the DAYS
indicator flashes on the Timekeeping Mode screen. In the
Day Counter Mode, the DAYS indicator flashes on the
screen of the particular day counter whose date matches
the date of the Timekeeping Mode.
•The day counter on the display when you exit the Day
Counter Mode appears first the next time you enter the
Day Counter Mode.
Year – Month – Day
Target date
Text
DAYS indicator
Numbers of days
Mode indicator
Operation Guide 3189/3252
E-20
Recalling Day Counter Data
In the Day Counter Mode, use (+) and (–) to scroll through the day counters.D B
To set the target date
1. In the Day Counter Mode, use D (+) and B (–) to
display the day counter you want to set.
2. Hold down A until the flashing cursor appears in the
text area. This indicates the input screen.
3. Press C to move the flashing in the sequence shown
below.
1st digit
Day
8th digit
YearMonth
Press .
E-21
4. While the cursor is in the text area, use D B and to scroll through characters at
the current cursor position. Characters scroll in the sequence shown below. Holding
down D or B scrolls at high speed.
(Space) A to Z 0 to 9 (Period) . - (Hyphen)
Press .
Press .
5. While the cursor is in the date area, press D B and to scroll through digits at the
current cursor position. Holding down scrolls at high speed.D or B
•Press B and D at the same time, and the message “CLR” will appear in the
display. The characters in the text area are cleared and today’s date is set as the
target date. You then can make any changes in the date you want.
E-22
6. After you make the settings you want, press A to exit the input screen.
•The date can be set within the range of January 1, 1950 to December 31, 2049.
•The text area display can show only three characters at a time. Longer text scrolls
continuously from right to left. The symbol “ ” indicates that the character to the
left is the last, and the character to the right is first.
E-23
Alarms
You can set five independent Daily Alarms. When an
alarm is turned on, the alarm tone sounds when the alarm
time is reached.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.
•There are six screens in the Alarm Mode. Five are for
daily alarms (indicated by numbers from
x1 through
x5), and one is for the Hourly Time Signal (indicated by
).
•All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing (pageC
E-5).
Alarm time
(Hour : Minutes)
Alarm number
Mode indicator
Alarm on
indicator
E-24
To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose
time you want to set is displayed.
Alarm 2Alarm 1
:00 (Hourly Time Signal)
Alarm 3
Alarm 5
Alarm 4
•To set a one-time alarm, display one of the screens indicated by an alarm number
from x1 through x5.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
•This operation turns on the alarm automatically.
3. Press C to move the flashing between the hour and minute settings.
E-25
4. While a setting is flashing, use D B (+) and (–) to change it.
•When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. ( indicator) or p.m. (A P indicator).
5. Press A to exit the setting screen.
Alarm Operation
The alarm sounds at the preset time for about 10 seconds, regardless of the mode the
watch is in.
•To stop the alarm tone after it starts to sound, press any button.
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-26
To turn an alarm on and off
1. In the Alarm Mode, use D to select an alarm.
2. Press B to toggle it on (the alarm on indicator
displayed) and off (the alarm on indicator not
displayed).
•Turning on a daily alarm (
x1 through x5
) displays the
alarm on indicator on its Alarm Mode screen.
•In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
Alarm on indicator
E-27
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Signal ( ).
2. Press B to toggle it on (the hourly time signal on
indicator displayed) and off (the hourly time signal on
indicator not displayed).
•The Hourly Time Signal on indicator is shown on the
display in all modes while the Hourly Time Signal is
turned on.
Hourly time
signal on indicator
E-28
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two finishes.
•The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
•The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
•The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
•Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
•All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing (pageC
E-5).
Mode indicator
Hours : Minutes
Seconds
1/100 second
E-29
Elapsed time measurement
Stop Re-start Stop Clear
Start
Start
Split
( displayed)SPL
Split release Stop Clear
Start Split Stop Split release Clear
Split time measurement
Split time and 1st-2nd place times
First runner
finishes.
Display time of
first runner.
Second runner
finishes.
Display time of
second runner.
Produktspezifikationen
| Marke: | Casio |
| Kategorie: | Armbanduhr |
| Modell: | 3252 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Casio 3252 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Armbanduhr Casio
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
20 Juni 2024
2 Juni 2024
2 Juni 2024
Bedienungsanleitung Armbanduhr
- Armbanduhr Crivit
- Armbanduhr Nedis
- Armbanduhr Beper
- Armbanduhr Velleman
- Armbanduhr IKEA
- Armbanduhr ADE
- Armbanduhr Auriol
- Armbanduhr Denver
- Armbanduhr Eurochron
- Armbanduhr Irox
- Armbanduhr Prologue
- Armbanduhr Renkforce
- Armbanduhr Sempre
- Armbanduhr Braun
- Armbanduhr Polar
- Armbanduhr Alpina
- Armbanduhr Topcom
- Armbanduhr Geemarc
- Armbanduhr Seiko
- Armbanduhr Calypso
- Armbanduhr Fossil
- Armbanduhr Garmin
- Armbanduhr Jaguar
- Armbanduhr Lotus
- Armbanduhr Michael Kors
- Armbanduhr Skagen
- Armbanduhr Withings
- Armbanduhr Citizen
- Armbanduhr Dugena
- Armbanduhr Habitat
- Armbanduhr Karlsson
- Armbanduhr Krontaler
- Armbanduhr Leff
- Armbanduhr Mondaine
- Armbanduhr Epson
- Armbanduhr Suunto
- Armbanduhr Guardo
- Armbanduhr Swatch
- Armbanduhr Tissot
- Armbanduhr Adidas
- Armbanduhr Lorus
- Armbanduhr Maurice Lacroix
- Armbanduhr Huawei
- Armbanduhr Omega
- Armbanduhr Kogan
- Armbanduhr TomTom
- Armbanduhr Grand Seiko
- Armbanduhr Fitbit
- Armbanduhr Armani
- Armbanduhr Bering
- Armbanduhr Breitling
- Armbanduhr Breo
- Armbanduhr Bulova
- Armbanduhr Christiaan Van Der Klaauw
- Armbanduhr Cover
- Armbanduhr Daniel Steiger
- Armbanduhr Davis
- Armbanduhr Detomaso
- Armbanduhr Diesel
- Armbanduhr Ebel
- Armbanduhr Festina
- Armbanduhr Gant
- Armbanduhr Girard-Perregaux
- Armbanduhr Guess
- Armbanduhr Hamilton
- Armbanduhr Holzkern
- Armbanduhr Hugo Boss
- Armbanduhr Ice Watch
- Armbanduhr Invicta
- Armbanduhr IWC
- Armbanduhr Junghans
- Armbanduhr KHS
- Armbanduhr Lexor
- Armbanduhr Nixon
- Armbanduhr Orient
- Armbanduhr Pulsar
- Armbanduhr Puma
- Armbanduhr Sinn
- Armbanduhr StĂĽhrling
- Armbanduhr Swiss Military Hanowa
- Armbanduhr Swiza
- Armbanduhr Timex
- Armbanduhr Torgoen
- Armbanduhr Tudor
- Armbanduhr TW Steel
- Armbanduhr Zenith
- Armbanduhr Victorinox
- Armbanduhr ETT
- Armbanduhr Boss
- Armbanduhr La Crosse Technology
- Armbanduhr Oregon Scientific
- Armbanduhr Spin Master
- Armbanduhr TicWatch
- Armbanduhr Digi-tech
- Armbanduhr Ferrari
- Armbanduhr Lambretta
- Armbanduhr Misfit
- Armbanduhr Movado
- Armbanduhr Rolex
- Armbanduhr Sigma Sport
- Armbanduhr Skmei
- Armbanduhr Tommy Hilfiger
- Armbanduhr Shinola
- Armbanduhr Sekonda
- Armbanduhr Emporio Armani
- Armbanduhr Philip Watch
- Armbanduhr Brera
- Armbanduhr Earnshaw
- Armbanduhr So & Co
- Armbanduhr Stauer
- Armbanduhr LIV
- Armbanduhr Fromanteel
- Armbanduhr Triwa
- Armbanduhr Nautica
- Armbanduhr Obaku
- Armbanduhr Hublot
- Armbanduhr Linjer
- Armbanduhr X-WATCH
- Armbanduhr Tikkers
- Armbanduhr Audemars Piguet
- Armbanduhr Pilgrim
- Armbanduhr MICHELE
- Armbanduhr WoodWatch
- Armbanduhr Rotary
Neueste Bedienungsanleitung fĂĽr -Kategorien-
Zenith Elite Classic 03.2290.679/51.C700 Bedienungsanleitung
19 August 2024
16 August 2024
12 August 2024
10 August 2024
9 August 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024