Caple DDMEXT21 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Caple DDMEXT21 (24 Seiten) in der Kategorie Dunstabzugshaube. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
E x t r a c t i o n M o t o r
I n s t r u c t i o n M a n u a l
Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk
M O D E L S :
DDMEXT21, DDMEXT25,
DDMEXT28, DDMEXT30, DDMEXT40
2Instruction manual Extraction Motors Please keep this instruction manual for future reference
C O N T E N T S
Safety Instructions 3
Environmental Protection 5
Useful Warnings 6
DDMEXT21 & DDMEXT25 8
DDMEXT30 11
DDMEXT40 14
DDMEXT28 17
Caple Contact Details 20
3Instruction manual Extraction MotorsPlease keep this instruction manual for future reference
W A R N I N G S
The air outlet of the appliance must not be connected
to a flue which is used for exhausting other fumes
from appliances, such as a central heating, boilers etc.
For the external exhausting of the fumes, comply with
the regulations in force. Ventilate the room suitably
according to the laws in force when the appliance
is working together with gas, oil or coal burning
appliances, at the same time. The motor of the peripheral
exhausting group is powered by the cooker-hood placed
in the kitchen. Before connecting the cooker hood to
the mains supply, make sure that the voltage indicated
in the rating plate corresponds to the mains voltage in
the home. Before carrying out any sort of maintenance
or cleaning operation, make sure that the appliance is
disconnected from the electrical mains. An appropriate
maintenance ensures a good working and a good
performance in the long run. The external motors type
DDMEXT are built in class I, therefore they must
be earthed.
4Instruction manual Extraction Motors Please keep this instruction manual for future reference
A P P R O P R I A T E U S E
-This appliance is intended to be used in household and
similar applications such as:
Staff kitchen areas in shops, offices and other
working environments.
Farm Houses.
By clients in hotels, motels and other residential type
environments.
Bed and breakfast type environments.
5Instruction manual Extraction MotorsPlease keep this instruction manual for future reference
E N V I R O N M E N TA L P R O T E C T I O N
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice. This
appliance is marked according to the European Directive on Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. The symbol on the product indicates that
this product may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. Disposal
must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local council, your household waste disposal service or the retailer where you
purchased the product.
C E D E C L A R AT I O N S O F C O N F O R M I T Y
This appliance has been manufactured to the strictest standards and complies with all
applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).
U K C A D E C L A R AT I O N S O F C O N F O R M I T Y
This appliance has been manufactured to the strictest standards and complies with all
applicable legislation.
W A R R A N T Y
Your new appliance is covered by warranty. The warranty card is enclosed - if it is missing, you
must provide the following information to your retailer in order to receive a replacement: date
of purchase, model and serial number (placed on the inside of the appliance storage drawer).
Registration can also be completed online by visiting www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service together
with proof of purchase.
If you fail to show your warranty card you will incur all repair charges.
Spare parts are only available from Caple Service and spare parts authorised centres.
T E C H N I C A L F I C H E
This appliance conforms to all current and applicable energy regulations. To view the technical
Fiche that supports the energy labelling data, please visit the product page on our
website www.caple.co.uk
6Instruction manual Extraction Motors Please keep this instruction manual for future reference
U S E F U L W A R N I N G S :
Use an air outlet pipe with a maximum length not higher than 5 meters.
Limit the number of bends in the exhausting pipe as every bend reduces the performance
up to one linear meter. (If you use 2 90° bends, than the length of the pipe has got to be
higher than 3 meters).
The material for the pipe has to be approved by an authorised company.
It is important to avoid changes in the diameter (A minimum 150mm diameter ducting
must be used).
Read carefully the manual of instructions and installation of the unit.-
Caple will not be responsible for problems of capacity and/or noise level due to the missed
respect of the warnings included in the instruction manual.
DDMEXT25 / 40 are equipped with a 200mm diameter hole for the exhausting pipe. If the
unit that has to be connected to the remote fan already equipped with a 200mm diameter
hole, then it is recommended to use a pipe with the same diameter in order to get good
performance. Otherwise, if the unit is equipped with a 150mm diameter hole, then it is
recommended to use the joint (from 200mm to 150mm), already supplied with the unit.
The electric box cable should not be cut or joined together with other cables, since it could
compromise the proper working and the safety conditions of the appliance. Furthermore,
this will invalidate the manufacturers warranty coverage.
C A U T I O N :
In order to know the exact power input in (WATT) of the motor being used, the technician shall
tick the box corresponding to the DDMEXT unit used on the label placed next to the rating
label, as shown in the figure below.
7Instruction manual Extraction MotorsPlease keep this instruction manual for future reference
W A R N I N G S :
As a result of the new EU65 “Energy label” and EU66 “ Ecodesign” regulations issued by the
European Commission, which came into force on January 1st, 2015, our products have been
adapted to comply with these new requirements. All of the models complying with the energy
label requirements, are equipped with new electronics including a timer device for suction
speeds control, when the air capacity exceeds 650m3/h.
DDMEXT21 DDMEXT30 and products have a timer control function activated at 4th speed
for 6 minutes, if it is combined with a or 5 minutes if it is combined with other DOWNDRAFT
products, such as ceiling hoods, wall hoods and island hoods. Once the above mentioned times
elapse, the motor will switch to 3rd speed automatically.
DDMEXT40 DDMEXT25 and products have a maximum air capacity higher than 650m3/h
at both 4th and 3rd speed, therefore they will have the following by default timer control
functions: DDMEXT40 DDMEXT25 DOWNDRAFT EM with
4th speed is time controlled for 6 minutes, after which the product switches to speed 2.
3rd speed is time controlled for 7 minutes, after which the product switches to speed 2.
DDMEXT40 DDMEXT25 and with CEILING- WALL AND ISLAND HOODS.
4th speed is time controlled for 5 minutes, after which the product switches to speed 2.
3rd speed is time controlled for 7 minutes, after which the product switches to speed 2.
The energy consumption of the appliance in standby mode is lower than 0.5W.
8Instruction manual Extraction Motors Please keep this instruction manual for future reference
D D M E X T 2 1 & D D M E X T 2 5
D D M E X T 2 1 D D M E X T 2 5
255mm
302mm
302mm
150mm
200mm
50mm
350mm
350mm
400mm
150mm
200mm
FIG.1
These products are designed to efficiently exhaust fumes and odours. They must be installed
inside the house and connected to the cooker-hood, which is in the kitchen (Fig.1).
9Instruction manual Extraction MotorsPlease keep this instruction manual for future reference
T Y P E S O F I N S TA L L AT I O N :
To make the installation easy, the product can be fixed to the wall, the ceiling or the floor in a
horizontal position (Fig.2) or vertically (Fig.3) to the fixing level.
N O T E :
For the vertical fixing, the brackets supplied can be used only on the longest side (Fig.4).
FIG.2 FIG.3
FIG.4
A
A
A
B
B
I N S TA L L I N G T H E A P P L I A N C E :
After deciding the position and the type of
installation, insert the anti-vibration rubber caps
in the holes of the brackets supplied (Fig.5C).
The rubber caps must be put on the sides which
are in contact with the wall.
Put the brackets (Fig.5A) on the extraction motor
by matching its holes with those of the brackets.
Fix with the screws supplied (Fig.5B).
Put the group on the point previously chosen for
the installation and mark the points on the wall
where the holes must be drilled.
Insert the dowels supplied in the holes (Fig.4A).
Put the extraction motor on the
wall by matching the holes of the brackets with
the plastic dowels. Screw with the screws
supplied (Fig.4B).
A
B
C
FIG.5


Produktspezifikationen

Marke: Caple
Kategorie: Dunstabzugshaube
Modell: DDMEXT21

Brauchst du Hilfe?

Wenn Sie Hilfe mit Caple DDMEXT21 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Dunstabzugshaube Caple

Bedienungsanleitung Dunstabzugshaube

Neueste Bedienungsanleitung für -Kategorien-