Canon SX7 Mark II Bedienungsanleitung

Canon Beamer SX7 Mark II

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Canon SX7 Mark II (146 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/146
MULTIMEDIA PROJECTOR
Table of contents/Safety Instructions
Before Use
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
User’s Manual
ENG
2
Quick Reference – How to start projection
Computer
1. Install the projector. P32-33
zInstall the projector at the desired distance from the screen.
2. Connect the projector. P36-39
zConnect the projector and the computer with a cable.
3. Turn on the projector. P40-41
zConnect the power cord and turn on the projector.
zAdjust the height of the projecting image (P43).
zSelect a display language when turning on the projector for the first time (P41).
4. Press the button twice. P46-47
zAdjust the focus of the screen.
5. Set up the computer. P44-45
zTurn on the computer and set the resolution.
6. Select the input signal by pressing the button. P48-50
zSelect an appropriate input signal in accord with the signal from the computer.
7. Press the button twice again. P46-47
zAdjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
8. Press the button. P54
zOptimize the input signal with the auto PC function (Skip this step if the projector
is projecting an image properly.)
9. Select the image mode with the button. P55-56
zSelect an appropriate image mode for projection.
zSpecify the aspect ratio or display area in the [Aspect] menu as required (P57,
90).
10. Start the presentation. P78-83
zSet the useful functions available during the presentation from the remote control.
Turn off the projector P60-61
zTurn off the projector and unplug the power cord.
Finishing the projection...
3
AV Equipment
1. Install the projector. P32-33
zInstall the projector at the desired distance from the screen.
zInstall batteries in the remote control (P29)
2. Connect the projector. P64-68
zConnect the projector and the AV equipment with a cable* (see P38, 39 for the
instruction on connecting a audio cable).
3. Turn on the projector. P40-41
zConnect the power cord and turn on the projector.
zAdjust the height of the projecting image (P43).
zSelect a display language when turning on the projector for the first time (P41).
4. Press the button twice. P46-47
zAdjust the focus of the screen.
5. Set up the AV equipment.
zTurn on the AV equipment and play the video image.
6. Select the input signal by pressing the button. P70-72
zSelect DIGITAL VIDEO as the input signal for a digital video image.*
For the other video image, go to step 7.
7. Press the button twice again. P70
zAdjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
8. Select the image mode with the button. P55-56
zSelect an appropriate image mode for projection.
zSpecify the aspect ratio or display area in the [Aspect] menu as required (P73,
90, 91).
Turn off the projector P60-61
zTurn off the projector and unplug the power cord.
* Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video
image (P65).
Finishing the projection...


Produktspezifikationen

Marke: Canon
Kategorie: Beamer
Modell: SX7 Mark II

Brauchst du Hilfe?

Wenn Sie Hilfe mit Canon SX7 Mark II benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamer Canon

Bedienungsanleitung Beamer

Neueste Bedienungsanleitung für -Kategorien-