Candy CTDF 1306-S Bedienungsanleitung

Candy Waschmaschine CTDF 1306-S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Candy CTDF 1306-S (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
WASHING MACHINE CTDF 1306
H V B1 C1 A
G B2 C2 p
A PROGRAMME SELECTOR
Use this control to select the desired wash programme. Turn the selector (it
can be turned in both directions) so that the programme is opposite the
reference indicator (p). The temperature selected will depend on the
programme. (See the Programme
Table).
B 1 SPIN SPEED SELECTOR
B2 DELAY START
C1 COLD WASH
C2 AQUAPLUS (SENSITIVE KEY)
G DOOR LIGHT
H START/PAUSE KEY
V “DIGITAL” Display
The display’s indicator system allows you to be constantly informed about the status of
the machine
p CONTROL POSITION INDICATOR
Programme table mod CTDF 1306
washing powder
load
option keys
C
programme programme for
aprox.
time
min.
max.
temp.
setting
ºC
spin
speed
rpm/min
max.
load
Kg. I II
White display 90º 1300
6
Fast coloureds with prewash display 60º 1300
6
*Fast coloureds display 60º 1300
6
*Fast coloureds display 40º 1300
6
COTTONS
Delicate coloureds display 30º 1300
6
Fast coloureds
display 50º 1000
2
Delicate coloureds
display 40º 1000
2
MIXED
SYNTHETICS
Delicate coloureds
display 30º 1000
2
Delicates display 40º 600
1,5
Woollens display 30º 800
1
DELICATES
Hand wash display 30º 800
2
Gentle rinse display
1000
Gentle spin display
1300
Empty display
Mix&wash (M&W) display
40º 1000
6
Fast 44 display
40º 1000
3
SPECIAL
Fast 32 display
30º 1000
2
* to (EU) 1015/2010 e nº 1061/2010 regulations Cotton wash programme requirements according
60° Cotton wash programme
40° Cotton wash programme
These wash programmes are recommended for soiled cotton fabrics and are the most effective in terms of both
energy efficiency and water consumption.
These programmes have been designed to comply with the recommended wash temperatures specified on the
labelling: the specified temperature may differ slightly from that indicated on the wash cycle.
Technical data mod.
CTDF 1306
Mains
voltage
Mains fuse
Amp. rating
Water
pressure
Max.
Power input
220-230V.
50Hz. 10 A. 0,05-0,8 Mpa 1500
IMPORTANT: Do not use liquid detergent for programs with a prewash cycle and/or timed start.
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
detergent for pre-wash I
detergent for wash programme II
fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Press the key or keys for any options desired (C1, C2,).
.- It is advisable to select the required options before pressing the Programme Start key (H).
.- Remember that if the programme has already passed the stage at which an option is activated, that option
will not be implemented.
C1 cold wash key
By pressing this button it is possible to transform every programme into a cold washing one, without
modify other characteristics (water level, times, rythmes, etc..).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely washed
thanks to this new device.
C2 aquaplus (sensitive key)
Thanks to the new SENSOR ACTIVA SYSTEM, by pressing the key it is possible to run a special
washing cycle applicable to all programs and types of fabric, caring for their fibres and the delicate skin of
the users who use them.
Taking on much more water, together with the new combined action of drum rotation cycles and taking on
and discharging water allow you to obtain perfectly clean, rinsed clothes. More water is used in the wash
to dissolve the detergent completely, ensuring an effective washing action. The water in the rinses has
also been increased to eliminate all trace of detergent in the fibres.
This function has been specifically studied for people with delicate, sensitive skin, who can suffer irritation
or allergy from the slightest detergent residue.
It is also advisable to use this function for children's clothes and delicate fabrics in general, especially for
washing bathrobes, whose fibres tend to retain detergent.
This option is not available for the wool program.
5- Select spin speed if required (B1)
B1 spin speed
Once the programme has been selected, the maximum spin speed allowed for that programme appears
on the display. Pressing the spin button will reduce the speed by 100 rpm each time the button is
pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin
button repeatedly.
6.-To start the programme, once options have been chosen, press the key H. The washing machine will
begin to operate. If you wish to cancel the option you have selected, press the key again. (The pilot light
will go off).
B2 delay start button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour
delay (h01 appears on the display); the pre-set delay increases by 1 hour each time the button is
pressed, until h24 appears on the display, at which point pressing the button again will reset the delay
start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The countdown
will begin and when it has finished the programme will start automatically.
It is possible to cancel the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the programme
selected.
At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE”
button or to cancel the process by setting the selector to the OFF position and then selecting another
programme.
cycle duration (V)
When a programme is selected the display automatically shows the cycle duration, which can vary,
depending on the options selected.
Once the programme has started you will be kept informed constantly of the time remaining to the end of
the wash.
door light (G)
Once the START/PAUSE button has been pressed the light first flashes then stops flashing and remains
on until the end of the wash.
2 minutes after the end of the wash the light goes off to show that the door can now be opened.

Produktspezifikationen

Marke: Candy
Kategorie: Waschmaschine
Modell: CTDF 1306-S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Candy CTDF 1306-S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Waschmaschine Candy

Candy

Candy CS 15102D3-80 Bedienungsanleitung

16 Oktober 2024
Candy

Candy ROW14856DWH Bedienungsanleitung

6 Oktober 2024
Candy

Candy CTA 104 AA Bedienungsanleitung

4 Oktober 2024
Candy

Candy LB CNE109TRU Bedienungsanleitung

4 Oktober 2024
Candy

Candy BWD596PH3/1-19 Bedienungsanleitung

2 Oktober 2024
Candy

Candy BR 49B8-S Bedienungsanleitung

1 Oktober 2024
Candy

Candy BR 412BL8-S Bedienungsanleitung

1 Oktober 2024
Candy

Candy BS 411B9-S Bedienungsanleitung

1 Oktober 2024
Candy

Candy BS 49B9-S Bedienungsanleitung

1 Oktober 2024
Candy

Candy CBW49D2BBE/1-80 Bedienungsanleitung

30 September 2024

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-

GE

GE GSD3715FAA Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WTIE148 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISE126R Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISE126B Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISE126 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISA105 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISA106 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WIA107 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WDIE14106 Bedienungsanleitung

16 Oktober 2024
Electrolux

Electrolux EWW12832 Bedienungsanleitung

16 Oktober 2024