Cameo F2 FC Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cameo F2 FC (108 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 38 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/108
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
F2 FC
PROFESSIONAL HIGH-POWER FRESNEL WITH RGBW LED
CLF2FC
RGB W
V1.50
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
SAFETY INFORMATION 3
INTRODUCTION 4
CONNECTIONS, CONTROL AND DISPLAY ELEMENTS 5
OPERATION 6
SETUP AND INSTALLATION 15
INSTALLATION / DISASSEMBLY OF BARN DOOR AND
FILTER FRAME / CLEANING OF LENSES 15
DMX TECHNOLOGY 16
TECHNICAL SPECIFICATIONS 17
MANUFACTURER’S DECLARATIONS 18
DMX CONTROL 99
DEUTSCH
SICHERHEITSHINWEISE 19
EINFÜHRUNG 20
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 21
BEDIENUNG 22
AUFSTELLUNG UND MONTAGE 31
TORBLENDE UND FILTERRAHMEN MONTIEREN /
DEMONTIEREN / LINSEN REINIGEN 32
DMX TECHNIK 32
TECHNISCHE DATEN 33
HERSTELLERERKLÄRUNGEN 34
DMX STEUERUNG 99
FRANCAIS
MESURES PRÉVENTIVES 35
INTRODUCTION 36
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET
D’AFFICHAGE 37
COMMANDE 38
INSTALLATION ET MONTAGE 47
MONTAGE/DÉMONTAGE DU VOLET COUPE-FLUX ET DU
CADRE POUR FILTRE / NETTOYAGE DES LENTILLES 48
TECHNOLOGIE DMX 49
CARACTÉRISTIQUES TECHNIQUES 49
DÉCLARATIONS DU FABRICANT 50
PILOTAGE EN MODE DMX 99
ESPAÑOL
MEDIDAS DE SEGURIDAD 51
INTRODUCCIÓN 52
CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS
DE VISUALIZACIÓN 53
FUNCIONAMIENTO 54
INSTALACIÓN Y MONTAJE 63
MONTAR/DESMONTAR LA VISERA Y EL BASTIDOR
DE FILTRO / LIMPIAR LAS LENTES 64
TECNOLOGÍA DMX 64
DATOS TÉCNICOS 65
DECLARACIONES DEL FABRICANTE 66
CONTROL DMX 99
POLSKI
ŚRODKI OSTROŻNOŚCI 67
WPROWADZENIE 68
GNIAZDA, ELEMENTY OBSŁUGI I WSKAŹNIKI 69
OBSŁUGA 70
USTAWIANIE I MONT 79
MONTWRÓT REFLEKTORA IRAMKI FILTRA / DEMONTAŻ /
CZYSZCZENIE SOCZEWEK 80
TECHNIKA DMX 80
DANE TECHNICZNE 81
OŚWIADCZENIA PRODUCENTA 82
STEROWANIE DMX 99
ITALIANO
MISURE PRECAUZIONALI 83
INTRODUZIONE 84
COLLEGAMENTI, ELEMENTI DI COMANDO E DI INDICAZIONE 85
UTILIZZO 86
INSTALLAZIONE E MONTAGGIO 95
MONTAGGIO E SMONTAGGIO DEL PARALUCE E
DEL PORTAFILTRO / PULIZIA DELLE LENTI 96
TECNOLOGIA DMX 96
DATI TECNICI 97
DICHIARAZIONI DEL PRODUTTORE 98
CONTROLLO DMX 99
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufciently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly
installed and secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, ifuids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does nott in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT
connection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.


Produktspezifikationen

Marke: Cameo
Kategorie: Beleuchtung
Modell: F2 FC

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cameo F2 FC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beleuchtung Cameo

Bedienungsanleitung Beleuchtung

Neueste Bedienungsanleitung für -Kategorien-