Caliber MCD 560 M Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Caliber MCD 560 M (12 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
E N G L I S H
1
S P E C I F I C A T I O N S
GENERAL
Power Supply DC 11 -14V
Polarity Negative Ground
Speaker impedance 4 ohms
Power Output 4 x 70W
CD PLAYER
System Compact disc audio system
Usable disc Compact disc
Sampling frequency 44.1KHz
No of quantization bits 1bit
Frequency 5-20,000Hz
Number of channels 2 stereo
S/N Ratio 70dB
RADIO SECTION
FM
Frequency Range 87.5-108 Mhz
Intermediate Frequency 10.7 MHz
Usable Sensitivity Better than 15dB at S/N 30 dB
Stereo Separation 25 dB at 1KHz
S/N Ratio 50 dB
AM/MW
Frequency Range 522-1620 Khz
Intermediate Frequency 450KHz
Usable Sensitivity Better than 45dB
S/N Ratio 40 dB
REMARK :
Specifications subject to change without notice.
1. POWER BUTTON
2. MODE BUTTON
3. MUTE BUTTON
4. ROTARY VOLUME KNOB
5.AF BUTTON/SUBWOOFER BUTTON
6.TA BUTTON/ iEQ5 BUTTON (PRESET EQUALIZER BUTTON)
7. PTY BUTTON/ X-BASS BUTTON
8. DISPLAY BUTTON/ MENU BUTTON
9. BAND BUTTON/ MP3 SEARCH BUTTON
10.AUDIO SELECT BUTTON/ MP3 ENTER BUTTON/RDS MENU
11.TUNING UP/DOWN,TRACK UP / DOWN BUTTONS
12. PRESET STATIONS BUTTONS (M1~M6)
13.AUTOMATICALLY STORE / PRESET SCAN (AS/PS) BUTTON
/ MP3-ID3-TAG INFORMATION BUTTON
14. PANEL RELEASE BUTTON
15. PANEL OPEN BUTTON
19. RESET BUTTON
RESET
MCD 560M manualCompleet 10-03-2006 12:55 Pagina 1
E N G L I S H
3
E N G L I S H
2
D I S C P L A Y
P R E C A U TI O N S
• Use only in a 12-volt DC negative-ground electrical system.
• Disconnect the vehicle's negative battery terminal while mounting and connecting the
unit.
• When replacing the fuse, be sure to use one with an identical amperage rating.
• Using a fuse with a higher amperage rating may cause serious damage to the unit.
• DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dan-
gerous to the eyes.
• Make sure that pins or other objects do not get inside the unit; they may cause mal-
functions, or create safety hazards such as electrical shock or laser beam exposure.
• If you have parked the car for a long time in hot or cold weather, wait until the tem-
perature in the car become normal before operating the unit.
• Keep the volume at a level at which you can hear outside warning sounds (horns
sirens, etc.).
CD N OTE S
• Playing a defective or dusty CD can cause dropouts in sound.
• Hold CDs as illustrated.
• DO NOT touch the unlabeled side.
• DO NOT attach any seal, label or data protection sheet to either side of a disc.
• DO NOT expose a CD to direct sunlight or excessive heat.
• Wipe a dirty CD from the center outward with a cleaning cloth.
• Never use solvents such as benzine or alcohol.
• This unit cannot play 3-inch ( 8cm ) CDs.
• NEVER insert a 3-inch CD contained in the adapter
or an irregularly shaped CD.
• The unit may not be able to eject it, resulting in a
malfunction.
B E F OR E O P E R ATION
• DO NOT raise the volume level too much, as this
will block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operation.
C A U T I O N
DO NOT open covers and do not repair by yourself.
Consult the dealer or an experienced technician for help.
Installation procedures
First complete the electrical connections, and then
check them for correctness.
Anti-Theft System
This unit is equipped with a detachable panel.
Removing this panel makes the radio totally inoperable.
Removing the panel
1. Press power button more than 2 seconds to switch off
the power of the unit.
2. Remove the detachable panel (REL button).
3. Press the button of the case and open the cover. Place
the panel into the case and take it with you when you
leave the car.
Install detachable panel
1.Fix right part of face panel in the right part of panel slot
of the unit.
2.Press down the left side of the face panel until it clicks
into the panel slot of the unit.
Remove the unit
Switch of the power of the unit.
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole in front of the set until they lock.
3. Pull out the unit.
5. BAS IC OP E R ATIONS
14) PANEL RELEASE BUTTON (REL)
Press this button to remove the face panel.
1) POWER ON/OFF BUTTON
Press POWER button or any other button on the front of the radio (except
Open/Eject)to turn the unit on. Press POWER button again to turn the unit off.
2) MODE BUTTON (MODE)
Press MODE button to select a different mode of operation as indicated on the display
panel.Available modes include Tuner, CD, MP3/WMA and in Aux mode .
3) MUTE BUTTON (MUTE)
Press the mute button momentarily to mute the audio volume, and "Mute" will flash in
the display. Press the mute button again to restore volume to the previous setting.
4) VOLUME KNOB
To increase the volume rotate the volume knob clockwise,to decrease the volume rota-
te the volume knob counterclockwise.
10) AUDIO BUTTON (AUDIO/ENTER)
Press the AUDIO button , the display will be displayed first option is Volume, followed
by Subwoofer (only if the Subwoofer feature is currently activated),Bass( only if EQ5 is
currently deactivated),Treble( only if EQ5 is currently deactivated), Balance, Fader and
back to Volume.
When adjusting audio functions, the unit will automatically exit audio control mode
after 5 seconds of inactivity. Use the volume knob to adjust the settings.
7) IX-BASS BUTTON (iX-BASS)
Press PTY button more than 3 seconds to activate the iX-BASS feature.This feature will
boost the bass and treble ranges. Press PTY button again to select "iX-BASS Off".
6) PRESET EQUALIZER BUTTON (iEQ5)
Press TA button more than 3 seconds to activate the IEQ5 feature.
The equalizer function applies preset sound effects to the unit's audio output signal.
Press EQUALIZER button repeatedly to step through the following equalizer options:
Off, Pop, Jazz, Classical, Beat and Rock.
8) DISPLAY (DISP)
Press DISPLAY/MENU momentarily to navigate through the following animation
options: EQ animation,Animation Display ,PTM (personal text message) and back to the
default display.
MENU FUNCTION LIST (MENU)
Press DISPLAY/ MENU for more than 3 seconds to access the menu. Navigate the menu
by pressing DISPLAY/ MENU momentarily to
move forward to the next option.The menu can also be navigated by using the Tuning
Up or Tuning Down Button to move to the next or previous option. The following
options are adjusted through this menu feature.
• CONTRAST
• DIMMER
• CLOCK FORMAT
• TIME SET
• LOCAL / DISTANCE SELECTOR
• AREA (TUNER FREQUENCY SPACING)
• PROGRAMMABLE TURN-ON VOLUME (VOL PGM)
• BEEP TONE ON/OFF
• ILLUMINATION COLOR (COLOR)
This option allows selection between two colors for the backlight illumination of the
unit; "COLOR 1" blue backlight. "COLOR 2” red backlight.
• SELECTABLE CLOCK DISPLAY (CLK ON LCD)
To select the clock and greeting not to be displayed when the unit is powered off, use
volume knob to select "CLK ON LCD Off".
• KEY ILLUMINATION ON/OFF (KEY LIGHT)
When the Key Light feature is deactivated with the unit turned off and the ignition
switch turned on, the front panel buttons will not illuminate.
• PERSONAL TEXT MESSAGE
Press the MENU button repeatedly until you see the “PTM” on the display,this will allow
the user to input his favor greeting note on the display.The “INPUT MESSAGE” will be
displayed by default. User is allowed to input max. 20 characters or symbols for the
“PTM” to be displayed on the LCD.
When “PTM” is displayed on the display, Press “ENTER” button to start up the “PTM”
enter process. Use the volume up/down button to input A & Z 0-9, +/- ! etc. Press
“ENTER” button to confirm the first letter input. Repeat the procedure and enter the
rest of the others letter input. If you want to change the inputted letters ,you can press
Tuning up /down button to move, the cursor backwards to change the inputted letters.
If no more button pressing after 7 seconds the inputted letters will be automatically set
as PTM.The previous PTM will be erased automatically once a new PTM is inputted.
1. Insert mounting bracket into the
dashboard, and bend the mounting
tabs out with a screwdriver. (Make
sure that lock lever is flush with
the mounting bracket. Not projec-
ting outward)
2. Secure the rear of the unit After
fixing mounting bolt and power
connector, fix the rear of the unit
to the car body by rubber cushion.
3. Insert trimplate
MCD 560M manualCompleet 10-03-2006 12:55 Pagina 2
E N G L I S H
5
8. RDS OPERATION
1.AF FUNCTION
By pressing AF button < 3 seconds to select AF ON/OFF. “AF ON” or “AF OFF” will
show & remain on the LCD segment for 5 seconds.. Under AF “On” mode, if the tuned
in station signal is getting weak, the unit will automatically switches to a different fre-
quency on the same network with stronger signal.
2.TA FUNCTION
By pressing TA button < 3 seconds, turn switch on TA standby mode.“TA ON” will show
& remain on the LCD segment for 5 seconds & the TA icon will light up on the LCD. In
the stand by mode, when a traffic announcement broadcast starts, the traffic announce-
ment broadcast will be received as top priority regardless of the function mode.When
a traffic announcement starts,“TRAFFIC INFO” will show on the LCD, press the TA but-
ton can cancelled the broadcast reception while a traffic announcement broadcast is
being received.
The unit will go back to the previous mode and TA goes into stand by mode again.When
the TP icon is not light up for 60 seconds.A beep Alarm tone is heard and the LCD will
show “Lost TP,TA”.TA seek will automatic activate and searches to another TA station.
3. PTY FUNCTION
Pressing PTY button < 3 seconds to goes into PTY select mode. “PTY” icon will light
up on the LCD.The LED around encoder volume will starts blinking.The user now has
5 seconds to select the desired PTY item by using volume knob. Once selected the PTY
item, user have 5 seconds to press “SELECT” or “TUNE UP or TUNE DOWN” buttons
< 3 seconds to seek for the selected PTY item.The LCD will display “PTY SEEK”. If no
station with the selected PTY broadcast can be received, the LCD will display “No
Match PTY” and blinks for 5 seconds then returns to the previous mode.
User can store his favor PTY into the preset memory M1 to M6. After selected a PTY
item, long press any one of the preset memory button can store the selected PTY.To
recall the stored PTY item by switching on PTY mode then press preset memory < 3
seconds, the unit will automatically search the stored PTY station in the preset memory
MUSIC GROUP SPEECH GROUP
POP , ROCK NEWS,AFFAIRS, INFO
EASY, LIGHT SPORT, EDUCATE, DRAMA
JAZZ, COUNTRY WEATHER,FINANCE, CHILDREN
CLASSICS CULTURE,SCIENCE,VARIED
NATION, OLDIES SOCIAL, RELIGION, PHONE IN
FOLK TRAVEL, LEISURE, DOCUMENT
Note: Factory default stored for PTY preset memory.
M1/News, M2/Information, M3/Pop Music, M4/Sports, M5/Classics, M6/Finance.
4. RDS (RADIO DATA SYSTEM) MENU
To access the RDS-MENU press the SELECT button > 3 seconds.
The following list of features can be selected
- Auto Seek All / RDS
- TA Seek On / Off
- TA Volume 0-40 (default 18)
- Regional On / Off
Steps to access Menu items:
1) To access the RDS MENU press the SELECT button > 3 seconds.
2) “RDS-MENU” will be displayed on display for 2 seconds, and then “Auto Seek”
appears on display.
3) To navigate through the MENU use the >>| or |<< buttons to navigate down or up
through the menu items. Or Press SELECT BUTTON repeatedly to view the menu
item sequential
4) Use the Volume knob to adjust the selected menu item.
5) After the selected menu item(s) has been changed and no other operation have been
made, a 5 second time-out will resume the head unit to the previous mode.
Features description of RDS-Menu Items:
- Auto seek RDS/All
Auto Seek “RDS” will be displayed by default.The user now has 5 seconds to adjust by
using volume knob from “RDS” to “ALL”. If “ALL” is selected, during the Auto Seek
tuning mode, the unit will stop at all radio station including Non RDS station regardless
AF and TA is switched on. If “RDS” was selected and the AF is on, during the Auto Seek
tuning mode.The unit will stop at only RDS station.
- TA seek On/Off
TA Seek “On” will be displayed by default The user now has 5 seconds to adjust by using
volume knob from “On” to “Off”. If selected “On” mode, when a received station does
not have TP information for 60 seconds, the unit automatic search to next station which
does not have the same station (PI), but has the TP information.When a TP information
get lost at the current station over the default retune time (60 seconds), the unit start
to search to next same PI station.When the same PI station does not catch in 1 cyclic
search,the unit retunes to next station with TP information.
If “Off” is selected, when a received station dose not have TP information for 60
seconds, a Double Beep Sound (Alarm) is output and the LCD will be displayed “Lost
TP TA” but the retune mode is not activated.
Note: This function only activate when “TA” switches on mode.
- TA Volume
TA Volume “18” will be displayed by default.The user now has 5 seconds to adjust by
using volume knob from “0-40”.When TA function is activated, if a TA program is tuned
in at the volume level set regardless of the volume of the other source at the time.
Note: When the unit tuned into a TA program.The volume level can only be increased
but cannot be decreased.
E N G L I S H
4
• GREETING NOTE
There are three different greeting note displayed on LCD base on different condition.
1.Good Morning, Good Afternoon or Good Evening.
2.“Enjoy Driving! Have a Safe Trip!”
3. "See you! Have a nice day!”
• IGNITION OFF CLOCK RECALL
The user can recall to display the clock time by press DISPLAY button, even when ignition
is off.
6 . T U N E R O P E R AT I O N
9) BAND BUTTON (BAND)
Press BAND to change between FM and AM(MW) bands.
11) TUNING UP/DOWN BUTTON ( )
Manual Tuning
Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio
frequency number up or down one step.
Auto Seek Tuning
Press the Up Tuning or Down Tuning button for less than 3 seconds to move to next
station automatically.
12) PRESET STATIONS BUTTONS
Six numbered preset buttons store and recall stations for each band (3 FM/1 MW).
Store a Station
Select a band (if needed), then select a station. Hold a preset button for 3 seconds.The
preset number will appear in the display.
Recall a Station
Select a band (if needed).Press a preset button to select the corresponding stored station.
13) AUTOMATICALLY STORE / PRESET SCAN (AS/PS)
Automatically Store
Automatically select 6 strong stations and store them in the current band. Select a band
(if needed). Press AS/PS button for more than three seconds.The new stations replace
stations already stored in that band.
Preset Scan
Scan stations stored in the current band. Select a band (if needed). Press AS/PS button
for less than 3 seconds.The unit will pause for ten seconds at each preset station. Press
AS/PS button again to stop scanning when the desired station is reached.
Stereo
The unit will automatically pick up a stereo signal, if stereo signal is available.When in
stereo mode, the ST icon will appear on the display.
7. CD P L AYE R O P E R ATION
INSERT AND EJECT CD
Insert a CD label-side up with the unit turned on, and the disc will begin to play. Press
the Eject button to stop CD play and eject the CD.The unit does not have to be turned
on to eject the CD.
PAUSE BUTTON (PAU)
Press the pause button to suspend disc play. Press the pause button again to resume disc
Play.
TRACK SELECT
Press the Up Tuning or Down Tuning button for less than one second to advance
to the next track on the CD,The selected track number will appear on the display. Press
and hold the Up Tuning or Down Tuning button for more than one second to fast
forward or fast reverse through the disc.
REPEAT BUTTON (RPT)
Press REPEAT BUTTON (RPT) during disc play to continuously repeat the track. Press
REPEAT BUTTON (RPT) again to stop Repeating.
RANDOM BUTTON (RDM)
Press RANDOM BUTTON (RDM) during disc play to play all tracks on a CD in ran-
dom order. Press RANDOM BUTTON (RDM) again to stop random play.
INTRO SCAN BUTTON (INT)
During disc play, press INTRO SCAN BUTTON (INT) to play the first 10 seconds to
each track on the disc. When the desired track is reached, press INTRO SCAN BUT-
TON (INT) again to end the scan and play the selected track.
CD TEXT
The unit can display the first 11 letters of Album Title,Artist Title. If the recorded informa-
tion is longer than 11 characters.The rest of text will scroll from right to left on the display.
RDS FUNCTIONS
The unit is equipped with the following RDS function:
- AF Alternative Frequencies
- CT Clock Time
- EON Enchanced other Network
- PI Program identifications
- PS Program service name
- PTY Program Type
- REG Regional Change
- TA Traffic Announcement
- TP Traffic program
MCD 560M manualCompleet 10-03-2006 12:55 Pagina 4
Produktspezifikationen
| Marke: | Caliber |
| Kategorie: | Autoradio |
| Modell: | MCD 560 M |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Caliber MCD 560 M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autoradio Caliber
12 Oktober 2024
7 Oktober 2024
7 Oktober 2024
28 September 2024
11 September 2024
4 September 2024
3 September 2024
30 August 2024
30 August 2024
23 August 2024
Bedienungsanleitung Autoradio
- Autoradio Clatronic
- Autoradio Sanyo
- Autoradio Manta
- Autoradio Medion
- Autoradio Nedis
- Autoradio Philips
- Autoradio SilverCrest
- Autoradio Sony
- Autoradio Tevion
- Autoradio Panasonic
- Autoradio LG
- Autoradio AEG
- Autoradio Maginon
- Autoradio Denver
- Autoradio ECG
- Autoradio MarQuant
- Autoradio Renkforce
- Autoradio Telefunken
- Autoradio Trevi
- Autoradio Blaupunkt
- Autoradio Grundig
- Autoradio Kenwood
- Autoradio Daewoo
- Autoradio Pyle
- Autoradio Telestar
- Autoradio Aiwa
- Autoradio Auna
- Autoradio Lenco
- Autoradio Pioneer
- Autoradio JBL
- Autoradio JVC
- Autoradio Krüger And Matz
- Autoradio Muse
- Autoradio Vieta
- Autoradio Hifonics
- Autoradio Akai
- Autoradio Dual
- Autoradio Hyundai
- Autoradio MT Logic
- Autoradio Orava
- Autoradio Orion
- Autoradio Skoda
- Autoradio Varta
- Autoradio Elta
- Autoradio Sencor
- Autoradio Biltema
- Autoradio Mercedes-Benz
- Autoradio Boston Acoustics
- Autoradio Harman Kardon
- Autoradio Magnat
- Autoradio XOMAX
- Autoradio Parrot
- Autoradio Alpine
- Autoradio Volkswagen
- Autoradio Volvo
- Autoradio Opel
- Autoradio MB Quart
- Autoradio Overmax
- Autoradio Rockford Fosgate
- Autoradio Crunch
- Autoradio NextBase
- Autoradio Norauto
- Autoradio AXTON
- Autoradio Clarion
- Autoradio Mac Audio
- Autoradio Conceptronic
- Autoradio Audiovox
- Autoradio Becker
- Autoradio ESX
- Autoradio Zenec
- Autoradio VDO
- Autoradio SPC
- Autoradio Roadstar
- Autoradio Tokaï
- Autoradio Audison
- Autoradio Macrom
- Autoradio Phonocar
- Autoradio Xblitz
- Autoradio Autovision
- Autoradio Boss
- Autoradio Hertz
- Autoradio Renault
- Autoradio Fiat
- Autoradio Kicker
- Autoradio Jensen
- Autoradio DLS
- Autoradio Eclipse
- Autoradio Eltax
- Autoradio Emphaser
- Autoradio Focal
- Autoradio Fusion
- Autoradio Ground Zero
- Autoradio Helix
- Autoradio Impulse
- Autoradio Lanzar
- Autoradio Mtx Audio
- Autoradio Naxa
- Autoradio Revo
- Autoradio Rodek
- Autoradio RTO
- Autoradio Sevic
- Autoradio Sirius
- Autoradio Soundstream
- Autoradio Spectron
- Autoradio Stinger
- Autoradio Tamashi
- Autoradio Toxic
- Autoradio Twister
- Autoradio Ultimate
- Autoradio US Blaster
- Autoradio VDO Dayton
- Autoradio Voxx
- Autoradio VW
- Autoradio Watssound
- Autoradio RetroSound
- Autoradio Kunft
- Autoradio Multilaser
- Autoradio Brigmton
- Autoradio Lark
- Autoradio Majestic
- Autoradio SoundMAX
- Autoradio Scion
- Autoradio Raveland
- Autoradio Planet Audio
- Autoradio Adcom
- Autoradio Sendai
- Autoradio Cartronix
- Autoradio Dension
- Autoradio Mystery
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
12 Oktober 2024
8 Oktober 2024
6 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024